DOI QR코드

DOI QR Code

근역장 통신용 0-3형 고분자 자성 복합소재의 복소투자율 변화

Complex Permeability of 0-3 Polymer Magnetic Composites for Near-Field Communication

  • 남중희 (한국세라믹기술원 전자소재융합본부) ;
  • 임충혁 (한국세라믹기술원 전자소재융합본부) ;
  • 윤지선 (한국세라믹기술원 전자소재융합본부) ;
  • 정영훈 (한국세라믹기술원 전자소재융합본부) ;
  • 조정호 (한국세라믹기술원 전자소재융합본부) ;
  • 백종후 (한국세라믹기술원 전자소재융합본부) ;
  • 김효태 (한국세라믹기술원 기초소재융합본부) ;
  • 김종희 (한국세라믹기술원 기초소재융합본부)
  • Nam, Joong-Hee (Electronic Materials Convergence Division, Korea Institute of Ceramic Eng. and Tech.) ;
  • Lim, Choong Hyuck (Electronic Materials Convergence Division, Korea Institute of Ceramic Eng. and Tech.) ;
  • Yun, Ji Sun (Electronic Materials Convergence Division, Korea Institute of Ceramic Eng. and Tech.) ;
  • Jeong, Young-Hun (Electronic Materials Convergence Division, Korea Institute of Ceramic Eng. and Tech.) ;
  • Cho, Jeong-Ho (Electronic Materials Convergence Division, Korea Institute of Ceramic Eng. and Tech.) ;
  • Paik, Jong Hoo (Electronic Materials Convergence Division, Korea Institute of Ceramic Eng. and Tech.) ;
  • Kim, Hyo Tae (Basic Materials Convergence Division, Korea Institute of Ceramic Eng. and Tech.) ;
  • Kim, Jong-Hee (Basic Materials Convergence Division, Korea Institute of Ceramic Eng. and Tech.)
  • 투고 : 2012.11.19
  • 심사 : 2012.12.11
  • 발행 : 2012.12.31

초록

이 연구에서는 근역장 통신(NFC)용 소재로 응용하기 위해, MnZn 페라이트와 FeSi 합금 분말을 filler로 사용하여 제조한 0-3형 자성복합소재의 복소투자율 변화(1 MHz~1 GHz)를 측정하였으며, RFID 주파수(13.56 MHz)에서의 복소투자율 값을 검토한 결과, filler 함량에 따라 투자율 실수항은 증가하고 허수항은 감소하는 결과를 얻었다. 즉, 시트형 자성복합소재의 응용을 위한 연구 결과로서, 고투자율을 나타내면서 손실항인 허수항을 상대적으로 낮출 수 있는 소재 제조공정 기술을 확보할 수 있었으며, 복소투자율 변화는 자성분말 filler의 성분과 입자 형태, 그리고 polymer 종류에 의존함을 알 수 있었다.

Magnetic properties of composite materials consisting of polymer filled with ferromagnetic powders (MnZn ferrite, Fe-Si alloy) were investigated in this study. The volume fraction of magnetic powders as fillers was varied from 70 % to 95 %. This paper presents the fabrication method of polymer magnetic composites in an effort to produce the 0-3 types of MnZn ferrite and FeSi as fillers with a proper complex permeability through the optimization of some experimental parameters. The polymer matrix composites were prepared by mixing the crushed ferrites and flaky FeSi powders homogenously with low-density resins (EPDM, epoxy). The relationships among the manufacturing technology of these materials, their filler volume fraction, as well as their complex permeability were measured and analyzed.

키워드

참고문헌

  1. R. E. Newnham, D. P. Skinner, and L. E. Cross, Mater. Res. Bull. 13, 525 (1978). https://doi.org/10.1016/0025-5408(78)90161-7
  2. T. J. Fiske, H. S. Gokturk, and D. M. Kalyon, J. Mater. Sci. 32, 5551 (1997). https://doi.org/10.1023/A:1018620407013
  3. H. S. Gokturk, T. J. Fiske, and D. M. Kalyon, J. Appl. Polymer Sci. 50, 1891 (1993). https://doi.org/10.1002/app.1993.070501105
  4. H. How and C. Vittoria, Phys. Rev. B 44, 9362 (1991) https://doi.org/10.1103/PhysRevB.44.9362
  5. Z. Hashin and S. Shtrikman, J. Appl. Phys. 33, 3125 (1962
  6. J. Lam, J. Appl. Phys. 66, 3741 (1989). https://doi.org/10.1063/1.344060
  7. H. Hsiang, W. Chen, Y. Chang, F. Hsu, and F. Yen, Am. J. Mater. Sci. 1, 40 (2011).
  8. B. Drnovek, V. B. Bregar, and M. Pavlin, J. Appl. Phys. 103, 07D924 (2008). https://doi.org/10.1063/1.2839580
  9. K. Sakai, Y. Wada, and S. Yoshikado, Progress In Electromagnetics Research Symp. (PIERS) 4, 211 (2008).
  10. T. Noh and J. Kim, J. Kor. Magn. Soc. 20, 143 (2010). https://doi.org/10.4283/JKMS.2010.20.4.143
  11. W. Yang, R. Yi, X. Yang, M. Xu, S. Hui, and X. Cao, Trans. Electrical and Electronic Mater. 13, 116 (2012). https://doi.org/10.4313/TEEM.2012.13.3.116
  12. A. Chevalier, E. L. Guen, A. Tarot, B. Grisart, D. Souriou, P. Queffelec, A. Thakur, and J. Matter, IEEE Trans. Magn. 47, 4132 (2011). https://doi.org/10.1109/TMAG.2011.2157899