Textile Science and Engineering (한국섬유공학회지)

The Korean Fiber Society (한국섬유공학회)
권호 표지

Influence of Basalt Composition on the Tensile Properties of Basalt Fibers

현무암 섬유의 구성 성분이 인장성에 미치는 영향

  • Lee, Hyun-U. (Department of Mechanical Engineering, Graduate School, Kyung Hee University) ;
  • Lim, Jung-H. (Department of Textile Engineering, Graduate School, Kyung Hee University) ;
  • Huh, You (Department of Mechanical Engineering, College of Engineering, Kyung Hee University)
  • 이현욱 (경희대학교 대학원 기계공학과) ;
  • 임정호 (경희대학교 대학원 섬유공학과) ;
  • 허유 (경희대학교 공과대학 기계공학과)
  • Received : 2011.05.10
  • Accepted : 2011.07.04
  • Published : 2011.08.28
⟨ Previous Next ⟩

Abstract

The tensile properties of basalt fibers were tested with respect to basalt composition. Basalt composition was controlled via the differences in its components' susceptibilities to microwaves, which led to different throughputs according to the employed take-up speed. Elongation at breaking and tensile modulus were strongly dependent on the contents of metals such as Fe, Mg, and Ti. The tensile breaking load or specific strength was dependent on the contents of nonmetals such as Si, Al, Ca, and K. Tensile properties were especially sensitive to Ti and K.

Keywords

Acknowledgement

Supported by : 한국학술진흥재단

References

  1. M. A. Sokolinskaya, L. K. Zabava, T. M. Tsybulya, and A. A. Medvedev, "Strength Properties of Basalt Fibers", Steklo Keramika (Translated in English), No. 10, 8-9 (1991).
  2. T. Czigany, "Special Manufacturing and Characteristics of Basalt Fiber Reinforced Hybrid Polypropylene Composites: Mechanical Properties and Acoustic Emission Study", Compos Sci Technol, 2006, 66, 3210-3220. https://doi.org/10.1016/j.compscitech.2005.07.007
  3. M. Botev, H. Betchev, D. Bikiaris, and C. Panayiotou, "Mechanical Properties and Viscoelastic Behaviour of Basalt Fiber-Reinforced Polypropylene", J Appl Polym Sci, 1999, 74, 523-531. https://doi.org/10.1002/(SICI)1097-4628(19991017)74:3<523::AID-APP7>3.0.CO;2-R
  4. J. S. Szabo and T. Czigany, "Static Fracture and Failure of Aligned Discontinuous Mineral Fiber Reinforced Polypropylene Composites", Polymer Testing, 2003, 22, 711-719. https://doi.org/10.1016/S0142-9418(03)00005-9
  5. T. Czigany, J. Vad, and K. Poloskei, "Basalt Fiber as a Reinforcement of Polymer Composites", Periodica Polytechnica ser Mech Eng, 2005, 49, 3-14.
  6. T. Czigany, K. Poloskei, and J. Karger-Kocsis, "Fracture and Failure Behavior of Basalt Fiber Mat-reinforced Vinylester/ Epoxy Hybrid Resins as a Function of Resin Composition and Fiber Surface Treatment", J Mater Sci, 2005, 40, 5609- 5618. https://doi.org/10.1007/s10853-005-1273-8
  7. M. Wang, Z. Zhang, Y. Li, M. Li, and Z. Sun, "Chemical Durability and Mechanical Properties of Alkali-proof Basalt Fiber and Its Reinforced Epoxy Composites", J Reinf Plast Compos, 2008, 27, 393-407. https://doi.org/10.1177/0731684407084119
  8. J. Militky, V. Kovacic, and J. Rubnerova, "Compressive Creep of Basalt Fibers and Epoxy Resin Linear Composite", Inter J Polym Mater, 2000, 47, 527-534. https://doi.org/10.1080/00914030008031309
  9. J. S. Sim, C. Park, and D. Y. Moon, "Characteristics of Basalt Fiber as a Strengthening Material for Concrete Structure", Compos Part B: Eng, 2005, 36, 504-512. https://doi.org/10.1016/j.compositesb.2005.02.002
  10. D. Penteado Dias and C. Thaumaturgo, "Fracture Toughness of Geopolymeric Concretes Reinforced with Basalt Fibers", Cement & Concrete Composites, 2005, 27, 49-54. https://doi.org/10.1016/j.cemconcomp.2004.02.044
  11. D. D. Dzhigiris, M. F. Makhova, V. D. Gorobinskaya, and L. N. Bombyr, "Continuous Basalt Fiber", Steklo i Keramika (Translated in English), No. 9, 14-16 (1983).
  12. J. Militky and V. Kovacic, "Ultimate Mechanical Properties of Basalt Filaments", Text Res J, 1996, 66, 225-229. https://doi.org/10.1177/004051759606600407
  13. J. Militky, V. Kovacic, and J. Rubnerova, "Influence of Thermal Treatment on Tensile Failure of Basalt Fibers", Eng Fracture Mech, 2002, 69, 1025-1033. https://doi.org/10.1016/S0013-7944(01)00119-9
  14. J. Militky and V. Kovacic, "Ultimate Mechanical Properties of Thermally Exposed Basalt Filament Yarns", Mol Cryst Liq Cryst, 2000, 354, 55-62. https://doi.org/10.1080/10587250008023602
  15. Y. Huh, H. Kim, H. Yang, and K. Jeon, "Microwave Melting of the Basalt Rock and Fiber Spinning", J Korean Soc Precision Eng, 2009, 26, 78-85.
  16. H. Kim, H. Yang, K. Jeon, and Y. Huh, "A Novel Method for Melt Spinning of Mineral Fibers", Text Sci Eng, 2009, 46, 136-142.