Abstract
The performance of a domestic ceramic membrane with pore size of $0.1{\mu}m$ was evaluated to produce drinking water. A pilot-scale ceramic membrane filtration plant with a capacity of $1m^3/d$ was operated at the filtration flux of $3.0m^3/m^2{\cdot}d$ to investigate the effect of both backwash interval and pre-ozonation on TMP (trans-membrane pressure) increasing rate. The TMP increased with increasing the backwash interval. However, the application of pre-ozonation reduced the TMP increasing rate remarkably. When 1 mg/L of ozone was dosed with contact time of 5 min, TMP increasing rate at the backwash interval of 1 hr was reduced by 30%. This result indicated that pre-ozonation was very effective in reducing membrane fouling. There was almost no change in TMP increasing rate when the ozone contact time was maintained in the range of 5 to 15 min. Increasing ozone concentration up to 3 mg/L showed beneficial effect on TMP increasing rate.
본 연구에서는 공경 $0.1{\mu}m$, 막여과 유속$3.0m^3/m^2{\cdot}d$의 국산 세라믹 막을 이용하여 음용수를 생산하는 기술에 대해 조사하였다. 세라믹 막의 성능 평가를 위해 $1m^3/d$ 규모의 pilot-scale 실험장치를 제작하였으며, 역세주기에 따른 차압변화와 전오존이 차압변화에 미치는 영향을 조사하였다. 차압상승률은 역세주기에 비례하여 증가하였으나, 전오존 주입을 통해 차압상승률을 낮출 수 있었다. 이 결과는 전오존이 파울링 감소에 효과가 있음을 의미한다. 1 mg/L의 전오존을 주입하고 5 min간 접촉하였을 때, 역세주기 1시간에서 차압상승률은 약 30% 감소하였다. 전오존 접촉시간을 5~15 min으로 변경하면서 운전한 결과, 접촉시간에 따른 차압상승률에는 차이가 없었다. 그러나, 차압상승률은 오존 주입농도가 증가하면 감소하는 경향을 보였다.