초록
Chirp SBP 탐사자료는 수 kHz의 고주파수대역의 자료로 다른 탄성파 탐사방법에 비해 고해상 자료이며 취득된 원자료를 기본적인 필터링 후 최종단면으로 이용할 수 있다. 그러나 고주파수 대역에서 발생할 수 있는 각종 잡음이 포함될 수 있고, 시간영역에서 기록된 단면은 복잡한 지형을 제대로 영상화하지 못할 가능성이 있다. 본 연구에서는 이러한 문제를 해결하고, 향상된 영상을 얻을 수 있는 전산처리 흐름(workflow)을 구축하고, 국내대륙붕자료 처리에 적합한 변수를 분석하고자 하였다. 기본 전처리과정 후, 신호대잡음비 필터링을 통하여 고주파수 성분에 포함될 수 있는 각종 잡음을 제거하고, 경사스캔을 이용하여 반사이벤트의 연속성을 증가시키고, 중합후 심도구조보정을 수행하여 시간영역에서 기록된 지형의 왜곡을 진구조로 구조보정하는 과정을 포함시켰다. 이러한 과정을 국내에서 널리 이용되고 있는 탐사장비들을 이용하여 취득된 자료에 적용한 결과, 해상도가 향상된 심도영역 탄성파 단면을 제작할 수 있었다. 본 처리과정을 국내 대륙붕 탐사에 많이 취득되고 있는 Chirp SBP 전산처리에 적용할 시 해석이 용이한 탄성파 단면을 얻을 수 있을 것으로 판단된다.
Chirp sub-bottom profilers (SBP) data are comparatively higher-resolution data than other seismic data and it's raw signal can be used as a final section after conducting basic filtering. However, Chirp SBP signal has possibility to include various noise in high-frequency band and to provide the distorted image for the complex geological structure in time domain. This study aims at the goal to establish the workflow of Chirp SBP data processing for enhanced image and to analyze the proper parameters for the domestic continental shelf. After pre-processing, we include the dynamic S/N filtering to eliminate the high-frequency component noise, the dip scan stack to enhance the continuity of reflection events and finally the post-stack depth migration to correct the distorted structure on the time domain sections. We demonstrated our workflow on the data acquired by domestically widely used equipments and then we could obtain the improved seismic sections of depth domain. This workflow seems to provide the proper seismic section to interpretation when applied to data processing of Chirp SBP that are largely used for domestic acquisition.