초록
천부 탄성파탐사가 직면한 과제 중의 하나는 어떻게 작은 음원 발생장치로 큰 진폭의 고주파 신호를 발생시킬 수 있는가 하는 문제이다. 본 연구에서는 천부 탄성파탐사 음원으로 가장 많이 사용되고 있는 해머로 PE, 나일론, 알루미늄, 철제 등의 타격판을 타격하였을 때의 성능을 시험하였다. 이를 위하여 해머 타격으로 발생되는 충격력, 가속도, 지반 진동 속도를 측정하고 이들의 파워를 산출하여 상호 비교하였다. 앞선 연구에 의하면 해머로 알루미늄 타격판을 타격했을 때 가장 큰 진폭의 탄성파가 발생될 것으로 예상되었으나, 실제 측정 결과 철제 또는 PE 재질의 타격판을 타격했을 때 보다 더 작은 탄성파 에너지가 발생되었다. 플라스틱 재질의 타격판을 타격했을 경우, 진폭은 비록 작으나 180 ~ 200 Hz 대역의 신호를 얻을 수 있었으며, 250 Hz 이상의 신호를 발생시키기는 어려운 것으로 보인다.
One of the most challenging issues facing shallow seismic survey is how to generate large amplitude of high frequency signal with small seismic sources. We tested the performance of the most commonly used shallow seismic source, hammer, with four plates: PE, nylon, aluminum, and steel plates. We compared their signal powers in terms of impulsive forces, accelerations, and ground vibration velocities caused by hammer impacts. According to a previous work, hammer blowing to an aluminum plate would generate the largest amplitude among four combinations. However, it was found in this experimental research that aluminum plate delivers seismic wave energy to the ground less than that generated with steel or PE plate. Even though the amplitude is relatively small, plastic plates could provide seismic pulses of 180 ~ 200 Hz in the bandwidth, and it seems to be very hard to generate seismic energy over the frequency of 250 Hz.