대한금속재료학회지 (Korean Journal of Metals and Materials)

  • 제48권1호
  • /
  • Pages.57-61
  • /
  • 2010
  • /
  • 1738-8228(pISSN)
  • /
  • 2288-8241(eISSN)
대한금속재료학회 (The Korean Institute of Metals and Materials)
권호 표지
DOI QR코드

DOI QR Code

전계방출 투과전자현미경 분석기술을 이용한 Cu 입자 표면산화층의 정밀평가

Precise Analysis of the Surface Oxidation Layer on Cu Powders Using FE-TEM Techniques

  • 이태훈 (나노종합팹센터 특성평가팀,충남대학교 나노소재공학과) ;
  • 유정호 (나노종합팹센터 특성평가팀) ;
  • 현문섭 (나노종합팹센터 특성평가팀) ;
  • 양준모 (나노종합팹센터 특성평가팀) ;
  • 성미린 (한양대학교 재료공학과) ;
  • 권진형 (한양대학교 재료공학과) ;
  • 이선영 (한양대학교 재료공학과) ;
  • 김정선 (국방과학연구소 4본부 4부) ;
  • 백경호 (충남대학교 나노소재공학과)
  • Lee, Tae Hun (Measurement & Analysis Team, National Nanofab Center,Department of Nanomaterials Engineering, Chungnam National University) ;
  • Yoo, Jung Ho (Measurement & Analysis Team, National Nanofab Center) ;
  • Hyun, Moon Seop (Measurement & Analysis Team, National Nanofab Center) ;
  • Yang, Jun-Mo (Measurement & Analysis Team, National Nanofab Center) ;
  • Seong, Mi-Ryn (Division of Metallurgy and Materials Engineering, Hanyang University) ;
  • Kwon, Jinhyeong (Division of Metallurgy and Materials Engineering, Hanyang University) ;
  • Lee, Caroline Sunyong (Division of Metallurgy and Materials Engineering, Hanyang University) ;
  • Kim, Jeong-Sun (The 4th R&D institute-4, Agency for Defense Development) ;
  • Baik, Kyeong Ho (Department of Nanomaterials Engineering, Chungnam National University)
  • 투고 : 2009.07.30
  • 발행 : 2010.01.20
⟨ 이전 논문 다음 논문 ⟩

초록

Nanosized surface structures of Cu powders were investigated at the atomic scale by field-emission transmission electron microscope techniques. The nanoscale surface oxide layer on the Cu powder was analyzed to be the $CU_2O$ phase by electron diffraction pattern and electron energy-loss spectroscopy. In addition, it was found from high-resolution transmission electron microscopy study that there are formed no surface oxide layers on the surface of alkanethiol coated Cu powders.

키워드

과제정보

연구 과제 주관 기관 : 지식경제부

참고문헌

  1. K. L. Klug, V. P. Dravid, and D. L. Johnson, J. Mater. Res. 18, 988 (2003) https://doi.org/10.1557/JMR.2003.0135
  2. N. A. Dhas, C. P. Faj, and A. Fedanken, Chem. Mater. 10, 1446 (1998) https://doi.org/10.1021/cm9708269
  3. Y.-H. Guo, B.-B. Jiang, J.-Z. Chen, and S.-J. Zhang, Surface & Coatings Technology 202, 555 (2007) https://doi.org/10.1016/j.surfcoat.2007.06.062
  4. S. Poulston, P. M. Parleu, P. Stone, and M. Bowker, Surface and Interface Analysis 24, 811 (1996) https://doi.org/10.1002/(SICI)1096-9918(199611)24:12<811::AID-SIA191>3.0.CO;2-Z
  5. J.-W. Lim, J. Iijima, Y. Zhu, J. H. Yoo, G.-S. Choi, K. Mimura, and M. Isshiki, Thin Solid Films 516, 4040 (2008) https://doi.org/10.1016/j.tsf.2007.12.159
  6. J.-M. Yang, J.-C. Park, Y.-B. Park, J.-J. Kim, T.-S. Back, H.-S. Lee, S.-Y. Lee, and S.-W. Park, Journal of Electron Microscopy 52, 305 (2003) https://doi.org/10.1093/jmicro/52.3.305
  7. K. H. Kim, J. M. Yang, C. W. Ahn, H. S. Seo, I.-S. Kang, and W.-J. Hwang, J. Kor. Inst. Met. & Mater. 46, 458 (2008)
  8. M. M. Disko, C. C. Ahn, and B. Fultz, Transmission Electron Energy Loss Spectrometry in Materials Science, p. 264-265, A Publication of The Minerals, Metals & Materials Society (1992)