• 대한금속재료학회지
• /
• 제48권1호
• /
• pp.57-61
• /
• 2010

Nanosized surface structures of Cu powders were investigated at the atomic scale by field-emission transmission electron microscope techniques. The nanoscale surface oxide layer on the Cu powder was analyzed to be the $CU_2O$ phase by electron diffraction pattern and electron energy-loss spectroscopy. In addition, it was found from high-resolution transmission electron microscopy study that there are formed no surface oxide layers on the surface of alkanethiol coated Cu powders.

• Applied Microscopy
• /
• 제36권spc1호
• /
• pp.63-69
• /
• 2006

By utilizing a field emission gun and a biprism installed on a transmission electron microscope (TEM), electron holography is extensively carried out to visualize the electric and magnetic fields of nanomaterials. In the electric field analysis, the distribution of electric potential in a sharp tip made of W coated with $ZrO_2$ is visualized by applying the voltage to the tip. Denser contour lines due to the electric potential are observed with an increase in the bias voltage. In the magnetic field analysis by producing the strong magnetic field with a sharp magnetic needle made of a permanent magnet, the in situ experiment is carried out to investigate the magnetization of hard magnetic materials. The results of these experiments clearly demonstrate that electron holography is a promising advanced transmission electron microscopy technique to characterize the electric and magnetic properties of nanomaterials.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.859-862
• /
• 2003

Well-aligned multiwall carbon nanotubes (MWCNTs) were prepared at low temperature of 400 $^{\circ}C$ by utilizing a radio frequency plasma-enhanced chemical vapor deposition (rf-PECVD) system. The MWCNTs were treated by an external rf plasma source and an ultra-violet laser in order to modify structural defect of carbon nanotube and to ablate possible contamination on carbon nanotube surface. Structural properties of carbon nanotubes were investigated by using a scanning electron microscopy (SEM), Raman spectroscopy, Fourier transformer Infrared spectroscopy (FTIR) and transmission electron microscope (TEM). In addition, the emission properties of the MWNTs were measured for the application of field emission display (FED) in near future. Various post treatments were found to improve the field emission property of carbon nanotubes.

• 한국결정성장학회지
• /
• 제21권3호
• /
• pp.124-128
• /
• 2011

전기방사법을 이용하여 제조된 웹은 높은 비표면적 및 다공성으로 약물전달시스템에 적용하고자 널리 연구 되어지고 있다. 본 연구에서는 생체적합성을 가진 생분해성 고분자 Poly(lactic acid)(PLA)와 생체안정성을 가지는 재료인 $TiO_2$를 이용하여 복합소재를 제작하였다. 인체에 유해한 용매인 chloroform이 포함되어 있지 않은 복합화를 위하여 용융전기방사법을 이용하여 나노섬유를 제작하였다. 이렇게 제조된 PLA/$TiO_2$ web을 scanning electron microscope(SEM)와 field emission transmission electron microscope(FE-TEM)을 이용하여 섬유의 모양을 확인하였고, X-ray diffractometer(XRD)판 이용하여 PLA/$TiO_2$ web의 결정구조를 분석하였다.

• 열처리공학회지
• /
• 제35권3호
• /
• pp.150-158
• /
• 2022

The effects of scandium addition on the Al-6Si-2Cu Alloy were investigated. The Al-6Si-2Cu-Sc alloy was prepared by gravity die casting process. In this study, scandium was added at 0.2 wt%, 0.4 wt%, 0.8 wt%, and 1.0 wt%. The microstructure of Al-6Si-2Cu-Sc alloy was investigated using Optical Microscope, Field Emission Scanning Electron Microscope, Electron Back Scatter Diffraction, and Transmission Electron microscope. The microstructure of Al-6Si-2Cu alloy with scandium added changed from dendrite structure to equiaxed crystal structure in specimens of 0.4 wt% Sc or more, and coarse needle-shape eutectic Si and β-Al₅FeSi phases were segmented and refined. The nanosized Al₃Sc intermetallic compound was observed to be uniformly distributed in the modified Al matrix.

• Journal of Information Display
• /
• 제2권3호
• /
• pp.78-85
• /
• 2001

The growth of carbon nanotubes(CNTs) in anodic aluminum oxide(AAO) template and their application to a field emitter are described. AAO templates were fabricated by anodizing bulk aluminum and sputtered thin Al film on Nb-coated Si wafers. After Co catalyst had been electrochemically deposited into the bottom of the pores in AAO template, CNTs were grown by pyrolyzing $C_2H_2$. Depending on the reaction conditions, CNTs grew up to or over the top of the pores in AAO template with different structures. The morphology and structure of CNTs were observed with a scanning electron microscope and a transmission electron microscope. The diameter of CNTs strongly depended on the size of the pores in AAO template and the growing conditions. The electron field emission measurement of the samples resulted in the turn-on field of 1.9-2.2 $V/{\mu}m$ and the field enhancement factor of 2450-5200. The observation of high field enhancement factors is explained in terms of low field screening effect.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.415.2-415.2
• /
• 2014

Cost-effective, robust devices for solid-state lighting industry that converts electricity to light revolutionize the current lighting industry. Phosphor materials used in these devices should be synthesized in a low-cost and effective method for use in WLEDs. In this presentation, the synthesis of Eu3+ ions doped BaMoO4 phosphor samples by a facile synthesis process for red component of WLEDs will be shown. The tetragonal phase of the host lattice was substantiated by the X-ray diffraction patterns. The morphological studies were carried out by using a field-emission scanning electron microscope and transmission electron microscope. These confirmed the formation of a shuttle like particles with perpendicular protrusions in the middle of the particle. The photoluminescence (PL) properties exhibited good emission with a high asymmetry ratio when excited with ultraviolet B wavelengths (~ 280-315 nm). The cathodoluminescence (CL) spectra showed similar results to the PL spectra, indicating the rich red emission. The results suggest that this phosphor is a good material as red region component in the development of tri-band UV excitation based WLEDs.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 추계학술대회 논문집
• /
• pp.256-257
• /
• 2015

마그네슘 합금은 낮은 비중, 높은 비강도, 주조성 및 절삭가공성, 치수안정성, 내흠집성이 우수한 특성을 지니고 있는 경량금속으로써 우수한 주조성과 상온강도, 연신율을 나타낸다. 최근에는 마그네슘 합금을 사용한 IT 기기의 케이스 및 자동차 내, 외장 부품 등의 제품이 다양하게 출시되어지며 금속 질감의 감성 기능까지 적용시킨 전자 기기 제품에 대한 수요가 급증하고 있는 추세이다. 하지만 마그네슘 합금의 낮은 부식 저항성은 마그네슘 합금을 적용시킨 제품에 큰 단점으로 작용되고 있으며 이를 해결하기 위한 연구가 활발히 진행 중이다. 본 연구에서는 플라즈마 전해산화법과 실리카 졸-겔 코팅법을 이용하여 마그네슘 합금의 내부식성을 향상시킴과 동시에 금속질감의 감성 기능을 구현하고자 하였다. 플라즈마 전해산화 공정으로 형성된 산화피막층과 $SiO_2$ 코팅으로 형성된 코팅층의 표면과 단면에 대해서는 FE-SEM(Field emission Scanning Electron Microscope)과 FE-TEM(Field emission Transmission Electron Microscope)으로써 확인하였고 전기화학적 특성 분석을 통한 동전위(Potentiodynamic polarization)와 EIS(Eletrochemical Impedance Spectroscopy) 그리고 Salt spray등을 분석하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.643-643
• /
• 2013

Recently, synthesis of low-dimensional nanostructures is gaining more importance due to their structural properties and growing potential applications. On the other hand, luminescent materials doped with rare earth ions have drawn immense attention. The commercial phosphors are based on many host materials. Among them, tungstates are being currently investigated by many research groups owing to a wide range of applications. Tungstates are formed by different metal cations (e.g., SrWO4, Na2WO4, NiWO4, Cr2WO6, and ZrW2O8) and their structure depends on the size of the metal cation. Tungstates with large bivalent cations (${\gg}0.1\;nm$) have the scheelite structure and the wolframite structure with smaller ions (＜0.1 nm). Strontium tungstate has the scheelite structure which is tetragonal with space group I41/a. The luminescent properties of the tungstate have been extensively explored in application fields such as sensors, detectors, lasers, photoluminiscent devices, photo catalysts, etc. In this work, we synthesized SrWO4 phosphors with different Eu3+ concentrations by using a facile route. The morphology was analyzed by using a field-emission scanning electron microscope, which exhibits the spherical shape. Transmission electron microscope image revealed the spheres composed of nanoparticles. X-ray diffraction patterns confirmed their tetragonal shape. The photoluminescence excitation and emission spectra were analyzed by varying the Eu3+ concentration, which shows a dominant red emission.

• 한국산학기술학회논문지
• /
• 제9권2호
• /
• pp.303-310
• /
• 2008

ICP-CVD(inductively-coupled Plasma chemical vapor deposition)를 사용하여 $250^{\circ}C$기판온도에서 140 nm 두께의 수소화된 비정질 실리콘(${\alpha}$-Si:H)을 제조하였다. 그 위에 30 nm-Ni을 열증착기를 이용하여 성막하고, $200{\sim}500^{\circ}C$ 사이에서 $50^{\circ}C$간격으로 30분간 진공열처리하여 실리사이드화 처리하였다. 완성된 실리사이드의 처리온도에 따른 실리사이드의 면저항값 변화, 미세구조, 상 분석, 표면조도 변화를 각각 사점면저항측정기, HRXRD(high resolution X-ray diffraction), FE-SEM(field emission scanning electron microscope), TEM(transmission electron microscope), SPM(scanning probe microscope)을 활용하여 확인하였다. $300^{\circ}C$에는 고저항상인 $Ni_3Si$, $400^{\circ}C$에서는 중저항상인 $Ni_2Si$, $450^{\circ}C$이상에서 저저항의 나노급 두께의 균일한 NiSi를 확인되었다. SPM결과에서 저저항 상인 NiSi는 $450^{\circ}C$에서 RMS(root mean square) 표면조도 값도 12 nm이하로 전체 공정온도를 $450^{\circ}C$까지 낮추어 유리와 폴리머기판 등 저온기판에 대응하는 저온 니켈모노실리사이드 공정이 가능하였다.