ZnO Power FET 모델링에 관한 연구

Study on Modeling of ZnO Power FET

  • Kang, Ey-Goo (Department of Photovoltaic Engineering, Far East University) ;
  • Chung, Hun-Suk (Department of Photovoltaic Engineering, Far East University)
  • 투고 : 2010.12.03
  • 심사 : 2010.12.28
  • 발행 : 2010.12.30

초록

본 논문에서는 차세대 전력반도체인 화합물 반도체 소자중 ZnO 전력소자에 대하여 모델링을 수행하였다. 화합물 전력 반도체 소자는 와이드 밴드 갭 소자로서 열 특성이 우수해 자동차 및 계통연계형 인버터의 차세대 핵심소자로 인정받고 있다. 모델링 결과 에피 두께가 3um, 도핑농도는 $1e17cm^{-3}$일때 내압 340V 정도 얻을 수 있었으며, 관련 I-V특성 등을 평가하였다. 실제 소자로 제작된다면 300V이내의 산업 응용에 충분히 활용할 수 있을 것으로 판단된다

In this paper, we proposed ZnO trench Static Induction Transistor(SIT). Because The compound semiconductor had superior thermal characteristics, ZnO and SiC power devices is next generation power semiconductor devices. We carried out modeling of ZnO SIT with 2-D device and process simulator. As a result of modeling, we obtained 340V breakdown voltage. The channel thickness was 3um and the channel doping concentration is 1e17cm-3. And we carried out thermal characteristics, too.

키워드

참고문헌

  1. Y. M, J. I. Nishizawa, T. Ohmi, R. K. Gupta, " Characteristics of Static Induction Transistors: Effects of Series Resistance", IEEE, transactions on electron devices, Vol. ED-25, No. 7, July, 1978
  2. T. Tamama, M. Sakaue, Y. Mizushima, "Bipolar-Mode Transistors on a Voltage-Controlled Scheme", IEEE, Transactions on electron devices, Vol. ED-28, No. 7, July, 1981
  3. J. Wang, B. W. Williams, "A New Static Indcution Thyristor(SITh) Analytical Model", IEEE Trans. on power Electronics, Vol. 14, No. 5, September, 1999
  4. H. Tadano, M. Ishiko, S. Kawaji and Y. Taga, " Low Loss Static Induction Devices (Transistors and Thyristors)", Microelectron. Reliab., Vol. 37, No. 9, pp. 1389-1396, 1997 https://doi.org/10.1016/S0026-2714(97)00010-3
  5. R. Signh, B. J. Baliga, "Cryogenic Operation of Static Induction (SIT/SITh) devices", Proceedings of 1995 International Symposium on Power Semiconductor Devices & ICs. Yokohama