Journal of the Korean Electrochemical Society (전기화학회지)

The Korean Electrochemical Society (한국전기화학회)
권호 표지
DOI QR코드

DOI QR Code

Characteristics and Preparation of Manganese Oxide Electrode by Using Pulse Voltammetry Electrodeposition for Electrolysis

펄스 전착법을 이용한 전기분해용 망간 산화물 전극의 제조 및 특성

  • Received : 2010.04.06
  • Accepted : 2010.04.13
  • Published : 2010.05.31
Download PDF
⟨ Previous Next ⟩

Abstract

In order to investigate the electrochemical propertied of titanium electrode for electrolysis, manganese oxide was electrodeposited on surface of mesh titanium by pulse voltammetry. The morphological changes and impedance results of manganese oxide electrodeposited electrode were analyzed by SEM and EDX. The size of electrodeposited manganese oxide on mesh titanium was increased with first cycle pulse time increase, and approximately 100 non-uniform manganese oxide was grown at 10 ms pulse polarization time. Charge transfer resistance($R_{ct}$) of near the overpotential was analyzed by EIS measurement and the feasibility of prepared electrode was evaluated by the overpotential calculated from Tafel plots.

망간 산화물이 전착된 전기분해용 전극의 전기화학적 특성을 조사하기 위해 펄스 전위차 방법을 이용하여 티타늄 망 표면에 망간 산화물을 전착하였다. 전착된 망간 산화물을 확인하기 위해 EDX 분석과 SEM 분석을 실시하였다. 또한 제조된 전극의 EIS 측정을 실시하여 전기화학적 특성을 관찰하였다. 티타늄 망에 펄스 1cycle의 인가 시간이 증가함에 따라 티타늄 망 표면에 형성되는 망간 입자 크기는 증가 하였으며, 10 ms의 펄스 인가 시간에서 응집이 발생하여 약 100 nm 크기의 망간 산화물 불균일 상이 형성되는 것을 SEM으로 관찰하였다. 다양한 조건으로 제조한 전극들은 EIS 측정을 통해 과전위 부근에서 나타나는 전자이동저항($R_{ct}$, Charge transfer resistance)을 평가하였고, Tafel plot을 이용하여 제조된 전극이 갖는 과전위를 계산하여 전기분해용 전극으로서의 가능성을 모색하였다.

Keywords

References

  1. O. R. Camara and S. Trasatti, ‘Surface electrochemical properties of Ti/($RuO_2+ZrO_2$) electrodes’ Electrochimica Acta, 41, 419 (1996). https://doi.org/10.1016/0013-4686(95)00315-0
  2. Hadi Adelkhani and Mehdi Ghaemi, ‘Nano-structural tailoring of manganese dioxide by using pulse current electrodeposition’ Solid Static Ionics, 179, 2278 (2008). https://doi.org/10.1016/j.ssi.2008.09.008
  3. J. Winkler, Jr., ‘Electrodeposition of metal alloys’ U.S. Patent, 1,951, 893 (1934).
  4. A. F. Zimmerman, D. G. Clark, K. T. Aust, and U. Erb, ‘Pulse electrodeposition of Ni-SiC nanocomposite’ Mater. Lett. 52, 85 (2002). https://doi.org/10.1016/S0167-577X(01)00371-8
  5. S. Jouanneau, S. Sarciaux, A. Le Gal La Salle, and D. Guyomard, ‘Influence of structural defects on the insertion behavior of -$MnO_2$: comparison of $H^+$ and $Li^+$’ Solid State Ionics, 140, 223 (2001). https://doi.org/10.1016/S0167-2738(01)00811-6
  6. D. Landolt and A. Marlot, ‘Microstructure and composition of pulse-plated metals and alloys’ Surf. Coat. Technol. 169-170, 8 (2003). https://doi.org/10.1016/S0257-8972(03)00042-2
  7. H. Adelkhani, M. Ghaemi, and S. M. Jafari, ‘Cycle life improvement of alkaline batteries via optimization of pulse current deposition of manganese dioxide under low bath temperatures’ J. Power Source, 163, 1091 (2007). https://doi.org/10.1016/j.jpowsour.2006.10.008
  8. M. E. Bahrololoom and R. Sani, ‘The influence of pulse plating parameters on the hardness and wear resistance of nickel-alumina composite coatings’ Surf. Coat. Technol. 192, 154 (2005). https://doi.org/10.1016/j.surfcoat.2004.09.023
  9. N. Ibl, J. Cl. Puippe, and H. Angerer, ‘Electrocrystallization in pulse electrolysis’ Surface Technology, 6, 287 (1978). https://doi.org/10.1016/0376-4583(78)90044-4
  10. J. Cl. Puippe, N. Ibl, and J. Appl. ‘Some theoretical aspects of pulse electrolysis’ Surface Technology, 10, 81 (1980). https://doi.org/10.1016/0376-4583(80)90056-4
  11. E. Lamy-Pitara and J. Barbier, ‘Platinum Modified by Electrochemical Deposition of Adatoms’ Applied Catalysis A: General, 149, 49 (1997). https://doi.org/10.1016/S0926-860X(96)00307-9
  12. Kerkeni, S. Lamy-Pitara, and E. J. Barbier, ‘Copper-Platinum Catalysts Prepared and Characterized by Electrochemical Methods for the Reduction of Nitrate and Nitrite’ Chemical Today, 75, 35 (2002). https://doi.org/10.1016/S0920-5861(02)00041-X
  13. J. F. E. Gootzen, P. G. J. M. Peeters, J. M. B. Dukers, L. Lefferts, W. Visscher, and J. A. R. van veen, ‘The Electrocatalytic Reduction of Nitrate on Pt, Pd, and Pt+Pd Electrode Activated with Ge’ J. Electroanal. Chem., 434, 171 (1997). https://doi.org/10.1016/S0022-0728(97)00093-4
  14. A. C. A. de Vooys, R. A. van Santen, and J. A. R. van Veen, ‘Electrocatalytic Reduction of Nitrate on Palladium/Copper Electrodes’ J Molecular Catalysis A; Chemical, 154, 203 (2002). https://doi.org/10.1016/S1381-1169(99)00375-1
  15. K.W. Kim, S. M. Kim, and E. H. Lee, ‘Characteristics of Ti Platinization for Fabrication Sn-modified Platinized Ti Electrode’ Koran Chem. Eng. Res., 45, 124 (2007).
  16. R. Clift, J. R. Grace, and M. E. Weber, ‘Bubbles, Drops, and Particles’ Academic Press, New York, (1978).