DOI QR코드

DOI QR Code

타 간극 캐비테이션과 저감장치에 관한 2 차원 모형 실험

Two-dimensional Model Tests for Rudder Gap Cavitation and Suppression Devices

  • 이창민 (서울대학교 조선해양공학과) ;
  • 오정근 (인하대학교 정석물류통상연구원) ;
  • 이신형 (서울대학교 조선해양공학과 및 해양시스템공학 연구소)
  • Lee, Chang-Min (Dept. of Naval Architecture & Ocean Engineering, Seoul National University) ;
  • Oh, Jung-Keun (Jungseok Research Institute of International Logistics and Trade, Inha University) ;
  • Rhee, Shin-Hyung (Dept. of Naval Architecture & Ocean Engineering, Research Institute of Marine Systems Engineering, Seoul National University)
  • 발행 : 2010.04.20

초록

The increasing size and speed of cargo ships result in high speed flow in propeller slipstream, and thereby cavitation is frequently observed on and around a rudder system. Rudder gap cavitation is the most difficult one to control and suppress among various types of the cavitation on a rudder system. In the present study, experiments of the incipient cavitation and pressure measurement were carried out for typical cargo ship rudder sections with and without the suppression devices, which were suggested by the authors. Fundamental understanding of the rudder gap cavitation inception was obtained along with its relevance to the surface pressure distribution. It is confirmed that the gap flow blocking devices effectively suppress the rudder gap cavitation and, at the same time, augment lift.

키워드

참고문헌

  1. Brennen, C.E., 1995, Cavitation and Bubble Dynamics, Oxford University Press, New York.
  2. Kim, S.P., Park, J.J., Kim, Y.S., Jang, Y.H., Choi, Y.B. and Paik, B.G., 2006, "An Experimental Research on Gap Cavitation Erosion of Semi-spade Rudder," Journal of the Society of Naval Architects of Korea, Vol. 43, No. 5, pp. 578-585. https://doi.org/10.3744/SNAK.2006.43.5.578
  3. Kinnas, S.A., Lee, H., Gu, H. and Natarajan, S., 2007, "Prediction of Sheet Cavitation on a Rudder Subject to Propeller Flow," Journal of Ship Research, Vol. 51, No. 1, pp. 65-75.
  4. Paik, B.G., Kim, K.Y., Ahn, J.W., Kim, Y.S., Kim, S.P. and Park, J.J., 2006, "Experimental Investigation on the Gap Cavitation of Semi-spade Rudder," Journal of the Society of Naval Architects of Korea, Vol. 43, No. 4, pp. 422-430. https://doi.org/10.3744/SNAK.2006.43.4.422
  5. Paik, B.G., Kim, K.Y., Ahn, J.W., Park, S.H., Heo, J.K. and Yu, B.S., 2008, "Cavitation Observation and Visualization of the Gap Flows on a Rudder Influenced by Propeller Slipstream and hull Wakes," Journal of the Society of Naval Architects of Korea, Vol. 45, No. 3, pp. 238-246. https://doi.org/10.3744/SNAK.2008.45.3.238
  6. Rhee, S.H. and Kim, H., 2008, "A Suggestion of Gap Flow Control Devices for the Suppression of Rudder Cavitation," Journal of Marine Science and Technology, Vol. 13, No. 4, pp. 356-370. https://doi.org/10.1007/s00773-008-0013-6
  7. Shen, Y.T., Remmers, K.D. and Jiang, C.W., 1997a, "Effects of Ship Hull and Propeller on Rudder Cavitation," Journal of Ship Research, Vol. 41, No. 3, pp. 172-180.
  8. Shen, Y.T., Jiang, C.W. and Remmers, K.D., 1997b, "A Twisted Rudder for Reduced Cavitation," Journal of Ship Research, Vol.41, No. 4, pp. 260-272.
  9. The American Society of Mechanical Engineers, 2005, PTC 19.1 - 2005 Test Uncertainty, ASME, New York.