초록
본 논문에서는 IEEE 802.15.3 그룹에서 표준화한 HDR -WPAN의 PHY 기술에 대한 구조와 세부 표준 규격을 분석하고, 송 수신부를 설계하여 성능을 분석하였다. 송신부 설계시 전송률에 따라 모드 선택이 가능한 QPSK, DQPSK, 16/32/64QAM-TCM 변조가 모두 가능하도록 설계하였고, 수신부는 DQPSK와 TCM 복호 알고리즘 구현에 중점을 두었다. VHDL을 이용하여 송수신 모뎀을 설계한 후, 실제 보드에 이식하여 MATLAB과 VHDL 시뮬레이터를 이용하여 성능 검증을 위한 연동 실험을 수행하였다. 성능분석 결과 SNR 22dB 이상에서 에러 없는 송수신이 가능함을 확인 하였다.
In this paper, the structure and detailed specifications of the HDR-WPAN physical layer have been analyzed and the block module of transmitter and receiver have been also designed, and analyzed the performance as well. In the process of transmitter design, it concentrated on all possibility of modulation of QPSK, DQPSK and 16/32/64QAM-TCM, which could be available for mode selection due to the transmission rate. In addition to the receiver module, DQPSK and TCM decoding algorithm is mainly concerned. After designing the transceiver MODEM using VHDL, we have programmed on the platform board and verified the functions of the MODEM. Some experimental results showed that it can be considered a possibility of data communication without error over SNR 22dB.