Journal of the Optical Society of Korea

  • 제13권2호
  • /
  • Pages.213-217
  • /
  • 2009
  • /
  • 1226-4776(pISSN)
  • /
  • 2093-6885(eISSN)
한국광학회 (Optical Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

Transcription Characteristics of Mold Surface Topography in the Molding of Aspherical Glass Lenses

  • Cha, Du-Hwan (Ultra-precision Optics Team, Korea Photonics Technology Institute (KOPTI)) ;
  • Hwang, Yeon (Ultra-precision Optics Team, Korea Photonics Technology Institute (KOPTI)) ;
  • Kim, Jeong-Ho (Ultra-precision Optics Team, Korea Photonics Technology Institute (KOPTI)) ;
  • Kim, Hye-Jeong (Ultra-precision Optics Team, Korea Photonics Technology Institute (KOPTI))
  • 투고 : 2009.05.18
  • 심사 : 2009.06.09
  • 발행 : 2009.06.25
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The transcription characteristics of the mold surface in the molding of aspherical glass lenses for camera phone modules have been investigated experimentally. The surface topographies of both the form and the roughness were compared between the mold and the molded lens. For the form topography, the molded lens showed a transcription ratio of 93.4% against the mold, which is obtained by comparing the form error (PV) values of the mold and the molded lens. The transcription characteristics of the roughness topography were ascertained by bearing ratio analysis.

키워드

참고문헌

  1. R. G. Bingham, D. D. Walker, D. H. Kim, D. Brooks, R. Freeman, and D. Riley, 'A novel automated process for aspherical surfaces,' Proc. SPIE 4093, 4445-4448 (2000) https://doi.org/10.1117/12.405237
  2. S. D. Jacobs, Innovations in Polishing of Precision Optics, H. Ohmori and H. M. Shimizi, ed. (Universal Academy Press Inc., Tokyo, Japan, 2003)
  3. D. H. Cha, H. J. Kim, H. U. Kim, S. S. Kim, Y. P. Park, and J. H. Kim, 'Fabrication and optical evaluation of aspheric glass lenses for 3 megapixel zoom camera phone module,' Optical Review 14, 145-150 (2007) https://doi.org/10.1007/BF02919415
  4. S. H. Chang, Y. M. Lee, K. H. Shin, and Y. M. Heo, 'A study on the aspherical glass lens forming analysis in the progressive GMP process,' J. Opt. Soc. Korea 11, 85-92 (2007) https://doi.org/10.3807/JOSK.2007.11.3.085
  5. D. J. Whitehouse, Handbook of Surface Metrology (Institute of Physics Publishing for Rank Talyor-Hobson, Bristol, UK, 1996)
  6. D. Prostrednik and P. H. Osanna, 'The Abbott curvewell know in metrology but not on technical drawings,' Int. J. Mach. Tools Manufact. 38, 741-745 (1998) https://doi.org/10.1016/S0890-6955(97)00126-0
  7. I. V. Kragelskii, Tribology Handbook (Mir Publishers, Moscow, Russia, 1981)

피인용 문헌

  1. Wafer-level Fabrication of Ball Lens by Cross-cut and Reflow of Wafer-bonded Glass on Silicon vol.14, pp.2, 2010, https://doi.org/10.3807/JOSK.2010.14.2.163