한국전기전자재료학회논문지 (Journal of the Korean Institute of Electrical and Electronic Material Engineers)

  • 제21권7호
  • /
  • Pages.669-673
  • /
  • 2008
  • /
  • 1226-7945(pISSN)
  • /
  • 2288-3258(eISSN)
한국전기전자재료학회 (The Korean Institute of Electrical and Electronic Material Engineers)
권호 표지
DOI QR코드

DOI QR Code

고분자 기판에 증착한 ITO 박막의 Bending 효과

Bending Effects of ITO Thin Film Deposited on the Polymer Substrate

  • 발행 : 2008.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

ITO thin film was deposited on PC substrate in Facing Targets Sputtering (FTS) system with various sputtering conditions. After it is applied to external bending force, we investigated how change the surface and electrical property of as-deposited ITO thin film. As the L(face-plate distance) of substrate decreases, it found that the maximum crack density is increasing at the center position and decreasing crack density as goes to the edge. So to apply same curvature (r) and bending force to PC substrate with ITO thin film, we fixed the L that is equal to curvature radius (2r). Before bending test, ITO thin films that deposited in the input current of 0.4 A and thickness of 200 nm already had biaxial tensile failure because of each different CTE (Coefficient of Thermal Expansion) and Others had been shown no bending or crack. After bending test, all samples had been shown cracks at about 200 times and as increasing the crack density, resistivity increased.

키워드

참고문헌

  1. 조범진, 김경환, 'PC 기판상에 제작된 ITO 박막의 특성', 전기전자재료학회논문지, 20권, 2호, p. 162, 2007 https://doi.org/10.4313/JKEM.2007.20.2.162
  2. 박준백, 황정연, 서대식, 박성규, 문대규, 한정인, 'Flexible display 기판 위에 bending에 따른 ITO 필름의 stress분포', 전기전자재료학회논문지, 16권, 12호, p. 1115, 2003
  3. 박준백, 서대식, 이상극, 이준웅, 김영훈, 문대규, 한정인, '고분자 기판의 휨 스트레스에 대한 Encapsulation층의 효과', 전기전자재료학회논문지, 17권, 4호, p. 443, 2004
  4. G. P. Crawford, 'Flexible flat panel displays', Series in Display Technology, p. 99, 2005
  5. J. M. Park, J. S. Hong, J. Y. Yang, J. J. Kim, S. H. Park, and H. M. Kim, 'Bending effects of indium-zinc oxide thin films deposited on polyethylene terephthalate substrate by radio frequency magnetron sputtering', Journal of the Korean Physical Society, Vol. 48, No. 6, p. 1530, 2006
  6. Y. Leterrier, L. Médicoa, F. Demarco, J.-A. E. Månson, U. Betz, M. F. Escolà, M. Kharrazi Olsson, and F. Atamny, 'Mechanical integrity of transparent conductive oxide films for flexible polymer-based displays', Thin Solid Films, Vol. 460, p. 156, 2004 https://doi.org/10.1016/j.tsf.2004.01.052
  7. J. W. Han, Y. H. Kim, J. H. Kim, J. Y. Hwang, and D. S. Seo, 'Analysis of ITO on polymer substrate by external bending force', Trans. EEM, Vol. 6, No. 4, p. 149, 2005 https://doi.org/10.4313/TEEM.2005.6.4.149
  8. D. R. Cairns, R. P. Witte II, D. K. Sparacin, S. M. Sachsman, D. C. Paine, G. P. Crawford, and R. R. Newton, 'Strain- dependent electrical resistance of tin-doped indium oxide on polymer substrates', Applied Physics Letters, Vol. 76, No. 11, 2000

피인용 문헌

  1. Effect of Strain Rate on the Deformation and Cracking Behaviors of ITO/PET Sheets with 45 ohms/sq. Sheet Resistance vol.22, pp.1, 2009, https://doi.org/10.4313/JKEM.2009.22.1.067