Abstract
The advent of towed geo-electrical array surveying on water and land has resulted in datasets of magnitude approaching that of airborne electromagnetic surveying and most suited to 1D inversion. Robustness and complete automation is essential if processing and reliable interpretation of such data is to be viable. Sharp boundaries such as river beds and the top of saline aquifers must be resolved so use of smoothness constraints must be minimised. Suitable inversion algorithms must intelligently handle low signal-to-noise ratio data if conductive basement, that attenuates signal, is not to be misrepresented. A noise-level aware inversion algorithm that operates with one elastic thickness layer per electrode configuration has been coded. The noise-level aware inversion identifies if conductive basement has attenuated signal levels so that they are below noise level, and models conductive basement where appropriate. Layers in the initial models are distributed to span the effective depths of each of the geo-electric array quadrupoles. The algorithm works optimally on data collected using geo-electric arrays with an approximately exponential distribution of quadrupole effective depths. Inversion of data from arrays with linear electrodes, used to reduce contact resistance, and capacitive-line antennae is plausible. This paper demonstrates the effectiveness of the algorithm using theoretical examples and an example from a salt interception scheme on the Murray River, Australia.
물위나 육지에서 끄는 방식의 전기비저항 배열법의 등장은 그 자료량의 규모를 항공전자탐사의 규모에 가깝게 만들었으며, 이렇게 얻어진 자료들의 대부분은 해석을 위한 1 차원 역산이 시도되었다. 이 자료들의 믿을만한 해석과 자료처리를 실행 가능화시키기 위해서는 강력하고 완벽한 자동화 공정은 필수 불가결한 요소이다. 하상이나 염수 대수층의 상부와 같은 뾰족한 경계를 찾아내야 하므로 평활화제한법의 이용은 최소화 시켜야 한다. 적절한 역산 방식이라면 신호를 감쇠시키는 전도성 기반암의 경우에는 해석의 오류를 피하기 위해 낮은 신호대 잡음비를 현명하게 다룰 수 있어야 한다. 이를 위해 각각의 전극 배열법에 대해 하나의 탄력적 두께를 갖는 층을 운용하는 잡음 인지 역산 방법이 코딩되었다. 잡음 인지 역산법은 만약 전도성 기반암이 선호를 감쇠시켜 잡음 수준보다 작게 만들면 이를 감지하여 적당한 위치에 전도성 기반암을 갖는 모형을 구성해 준다. 초기모형의 층들은 4 극으로 구성된 각 전기 배열법의 유효깊이가 미치는 범위 내에서 제 위치를 찾아가게 된다. 이 알고리듬은 4 극의 유효깊이가 대략 지수함수적인 배열을 이루어 자료가 얻어졌을 때 가장 최상의 결과를 나타낸다. 접지저항을 줄이기 위한 선전극이나 용량선 안테나(capacitive-antenna)에 의한 자료의 역산도 가능하다. 이 논문은 이론자료와 오스트레일리아의 Murray 강의 염분차단 계획의 예를 들어 개발된 알고리듬의 유용성을 보여주었다.