DOI QR코드

DOI QR Code

A Study on the Thermal Properties of CNT Reinforced Semiconductive Shield Materials for Power Cables

CNT를 첨가한 전력케이블용 반도전 재료의 열적특성에 관한 연구

  • 양훈 (원광대학교 재료공학과) ;
  • 국정호 (전북대학교 고분자 BK-21 BIN 융합기술 연구팀) ;
  • 방정환 (서남대학교 보건환경학과) ;
  • 박대희 (원광대학교 재료공학과)
  • Published : 2007.12.01

Abstract

In this paper, we have investigated thermal properties of semiconductive shield materials for power cables. EEA (Ethylene Ethyl Acrylate) was used for base polymer and TGA (Thermal Gravimetric Analysis) and AFM (Atomic Force Microscope) were investigated with various carbon black and CNT (carbon nanotube) contents. When CNT reinforced composites and conventional composite were investigated with TGA, we knew that thermal properties of CNT reinforced composite were better than them of conventional composite. To investigate roughness, we used AFM. Before and after aging, AFM was applied and after aging, roughness was increased. As a result, suitable CNT and CB(carbon black) content is CNT:CB=50:50.

Keywords

References

  1. 선효순, 남시도, 나노기술동향, p. 13, 2005
  2. M. t. Shaw and S. H. Shaw, 'Water treeing in solid dielectrics', IEEE Trans. Elec. Ins., Vol. 19, p. 419, 1993 https://doi.org/10.1109/TEI.1984.298768
  3. 이경용, 최용성, 박대회, '전력케이블에서 반도전 재료의 이온성 불순물에 따른 열적 특성', 전기전자재료학회논문지, 17권, 12호, p. 1326, 2004
  4. 강대용, 오광영, 김용주, 박대희, '절연, 반도전, 절연층에 있어서 유전특성과 절연파괴 현상', 전기전자재료학회논문지, 11권, 6호, p. 163, 1998
  5. 한재홍, 김상준, 권오형, 강희태, 서광석, '반도전층내 불순물이 전력케이블의 신뢰도에 미치는 영향', 대한전기학회논문지, 46권, 1호, p. 19, 1997
  6. 한재홍, 송일근, 임장섭, 이동영, '전력케이블용 반도전재료의 설계기술', 전기전자재료학회 논문지, 13권, 2호, p. 12, 2000
  7. Burgmayer, P., and Murry, R. W., 'An ion gate membrane : Electrochemical control of ion permeability through a membrane with an embedded electrode', Journal of American Chemical Society, Vol. 104, p. 6139, 1982 https://doi.org/10.1021/ja00386a061
  8. Ivory, D. M., Miller, G. G., Sowa, J. M., Schachlette, L. W., Chance, R. R., and Baughman, R. R., 'Highly conducting charge-transfer complexes of poly(p-phenylene)', Journal of Chemical Physics, Vol. 71, No.3, p. 1506, 1979 https://doi.org/10.1063/1.438420
  9. Candau, F., 'Scientific Methods for the Study of Polymer Colloid and Their Application', Kluwer Academic Publishers, p. 486, 1988
  10. 곽정춘, 이내성, '탄소나노튜브의 합성기술 동향 및 전망', 전기전자재료학회논문지, 20권, 6호, p. 27, 2007
  11. S.-J. Park, H.-Y. Lee, M.-J. Han, and S.-K. Hong, 'Thermal and mechanical interfacial properties of the DGEBA/PMR-15 blend system', Journal of Colloid and Interface Science, Vol. 270, Iss. 2, p. 288, 2004 https://doi.org/10.1016/S0021-9797(03)00757-4
  12. A. Marcilla, F. J. Sempere, and J. A. Reyes-Labarta, 'Differential scanning calorimetry of mixtures of EVA and PE kinetic modeling', Polymer, Vol. 45, No. 14, p. 4977, 2004 https://doi.org/10.1016/j.polymer.2004.05.016
  13. A. Marcilla, J. A. Reyes-Labarta, and F. J. Sempere, 'DSC kinetic study of the transitions involved in the thermal treatment of polymers methodological considerations', Polymer, Vol. 42, No. 12, p. 5343, 2001 https://doi.org/10.1016/S0032-3861(00)00925-3