한국소음진동공학회논문집 (Transactions of the Korean Society for Noise and Vibration Engineering)

  • 제16권7호
  • /
  • Pages.739-745
  • /
  • 2006
  • /
  • 1598-2785(pISSN)
  • /
  • 2287-5476(eISSN)
한국소음진동공학회 (The Korean Society for Noise and Vibration Engineering)
권호 표지
DOI QR코드

DOI QR Code

압전 작동기를 이용한 새로운 디스펜싱 시스템 설계

Design of a New Dispensing System Featuring Piezoelectric Actuator

  • 구오흥 (인하대학교 대학원 기계공학부) ;
  • 최민규 (인하대학교 대학원 기계공학부) ;
  • 윤보영 (인하대학교 대학원 기계공학부) ;
  • 최승복 (인하대학교 기계공학부)
  • 발행 : 2006.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents a novel type of hybrid dispensing head for IC fabrication and surface mount technology. The proposed mechanism consists of solenoid valve and piezoelectric stack as actuators, and provides positive-displacement and jet dispensing. The positive-displacement dispensing can produce desired adhesive amount without viscosity effect, while the jet dispensing can produce high precision adhesive amount. In order to determine the relationship between required voltage of the piezoelectric actuator and needle displacement, both static and dynamic analysis are undertaken, In addition, finite element analysis is performed in order to find optimal design parameters. Dispensing flow rate and pressure in the chamber are evaluated through fluid dynamic model.

키워드

참고문헌

  1. Dixon, D., et aI., 1997, 'Practical Issues Concerning Dispensing Pump Technologies', Circuits Assembly, pp. 36 - 40
  2. Ness, C. Q. and Lewis, A. R., 1998, 'Adhesives/epoxies & Dispensing' , Surf. Mount Technol.(SMT), pp. 114 -122
  3. Wedekin, S. 2001, 'Micro Dispensing Comes of Age' , Surf. Mount Technol. (SMT) , pp. 62 - 71
  4. Chen, X. B. and Kai, J., 2004, 'Modeling of Positive - displacement Fluid Dispensing Processes' , IEEE Transactions on Electronics Packaging Manufacturing, Vol. 27, No. 3. pp. 157 - 163 https://doi.org/10.1109/TEPM.2004.843083
  5. David C. Roberts, Hanquing Li, J. Lodewyk Steynn, Onnik Yaglioglu, S. Mark Spearing, Martin A. Schmidt, Nesbitt W. Hagood, 2003, 'A Piezoelectric Microvalve for Compact High - frequency, Highdifferential Pressure Hydraulic Micropumping Systems' , Journal of Microelectromechanical Systems, Vol. 12, No. 1, pp. 81- 92 https://doi.org/10.1109/JMEMS.2002.807471
  6. Hong, Y.-P. and Li, H.-X., 2003, 'Comparative Study of Fluid Dispensing Modeling' , IEEE Transactions on Electronics Packaging Manufacturing, Vol. 26, No. 4. pp. 273 - 280 https://doi.org/10.1109/TEPM.2003.820823
  7. Shin, H. C. and Choi, S. B., 1996, ' Vibration Control of a Very Flexible Robot Arm via Piezoactuators' , Transactions of the Korean Socity for Noise and Vibration Engineering, Vol. 6, No.2. pp. 187 - 196

피인용 문헌

  1. Experimental Analysis of Operating Parameters for Piezoelectric Jetting Dispenser vol.25, pp.10, 2015, https://doi.org/10.5050/KSNVE.2015.25.10.685