• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4B
• /
• pp.258-268
• /
• 2012

Wireless Sensor Network(WSN) is constituted by low-cost and low-energy, So the most important issue is that the task of the sensor performs successfully by using less energy. In previous WSN, determination of the header and gathering sensor data solution by header give great affection to the performance of network. In this paper, we propose a Hybrid transmission method which considers the direction of data collections. In the proposed hybrid routing method, all of the sensors determine that transmission the data to the sink node directly or indirectly using the head node depend on the location of the head node in the cluster. The performance is compared with the LEACH(Low Energy Adaptive Clustering Hierarchy) by experimental analysis. The results show that the preposed method can reduce the communication distance and energy consumption by avoiding the detour direction of transmission of the data.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06c
• /
• pp.521-526
• /
• 2007

내장형 자바의 성능 향상을 위해 바이트코드를 기계어 코드로 미리 번역하여 내장형 시스템에 설치하는 Ahead-of-Time Compile(AOTC)가 많이 사용되고 있으나 수행 중에 동적으로 다운로드 되는 바이트코드를 수행하기 위해서는 기존의 해석기도 함께 사용되어야 한다. 이 경우 일부 자바 메소드는 AOTC에 의해 처리되고 일부 메소드는 해석기에 의해 수행되는 하이브리드 수행 환경이 된다. 이러한 환경에서 해석기 메소드가 AOTC 메소드를 호출하거나 AOTC 메소드가 해석기 메소드를 호출하는 경우 호출 오버헤드가 커서 성능을 저하시킬 수 가 있다. 본 연구에서는 AOTC에서 사용 가능한 두 가지 호출 인터페이스인 Java Native Interface(JNI)와 Compiled Native Interface(CNI)에 대해 하이브리드 수행 환경에서의 호출 오버헤드와 성능을 평가하고 각각의 장단점에 대해 논의한다.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.1
• /
• pp.117-125
• /
• 2009

In hybrid wireless networks, a mobile node in MANET can communicate with other mobile nodes as well as nodes in the Internet. Hybrid mobile networks help to expand the application domains of MANET from limited areas, such as military applications to more diverse and general application areas. Previous routing protocols in hybrid wireless networks have not taken advantage of location information of nodes in a network. By using location information of nodes, a routing protocol can reduce the overhead of control messages for efficient network operations. This paper proposes a routing protocol for hybrid mobile networks, called Location-aided AODV+ (LAp) that is based on ADOV+ and takes advantage of node's location information. Performance evaluation shows that LAp performs better than ADOV+ when there are a sufficient number of nodes in a network for route establishments.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10c
• /
• pp.530-535
• /
• 2007

내장형 자바의 성능 향상을 위해 바이트코드를 기계어 코드로 미리 번역하여 내장형 시스템에 설치하는 Ahead-of-Time Compile(AOTC)가 많이 사용되고 있으나 수행 중에 동적으로 다운로드 되는 바이트코드를 수행하기 위해서는 기존의 해석기도 함께 사용되어야 한다. 이 경우 일부 자바 메소드는 AOTC에 의해 처리되고 일부 메소드는 해석기에 의해 수행되는 하이브리드 수행 환경이 된다. 이러한 환경에서 해석기 메소드가 AOTC 메소드를 호출하거나 AOTC 메소드가 해석기 메소드를 호출하는 경우 호출 오버헤드가 커서 성능을 저하시킬 수 가 있다. 본 연구에서는 AOTC에서 사용 가능한 두 가지 호출 인터페이스인 Java Native Interface(JNI)와 Compiled Native Interface(CNI)에 대해 하이브리드 수행 환경에서의 호출 오버헤드와 성능을 평가하고 각각의 장단점에 대해 논의한다. 그리고 두 호출 인터페이스의 장점을 살릴 수 있는 새로운 호출 인터페이스를 제안하고자 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.121-127
• /
• 2017

In the land mobile satellite (LMS) communication, a hybrid satellite-terrestrial relay networks (HSTRNs) using a maximal ratio combining (MRC) scheme are widely used to enhance the quality of signal from a satellite. In this paper, we derive equations for the TCP throughput and the spectral efficiency in the HSTRN and analyze results of the performance evaluation for TCP in various environments. In the simulation results, it is shown that increasing the number of terrestrial relays can enhance the TCP throughput and spectral efficiency thanks to the MRC scheme. However, the usage of the static number of terrestrial relays considering no channel states would cause the overhead. Furthermore, it has a limitation to enhance the network performance by only MRC scheme in HSTRN because the TCP performance is sensitive to the packet los rate. Therefore, we discuss the possible solutions that can additionally enhance the network performance and reduce the overhead.

• The KIPS Transactions:PartC
• /
• v.16C no.2
• /
• pp.223-228
• /
• 2009

Efficient service discovery mechanism is a crucial feature for a hybrid ad-hoc network supporting extension of a wireless ad-hoc network to the Internet. We propose an efficient cross-layer service discovery mechanism using non-disjoint multi-path source routing protocol for hybrid ad-hoc networks. Our scheme has advantages of multi-path routing protocol and cross-layer service discovery. Intuitively, it is not difficult to imagine that the cross-layer service discovery mechanism could result in a decreased number of messages compared to the traditional approach for handling routing independently from service discovery. By simulation, we show that faster route recovery is possible by maintaining multiple routing paths in each node, and the route maintenance overhead can be reduced by limiting the number of multiple routing paths and by maintaining link/node non-disjoint multi-path.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06d
• /
• pp.356-361
• /
• 2008

유비쿼터스 환경에서 이동 에이전트는 데이터 전송, 네트워크 지연 및 대역폭 오버헤드와 같은 네트워크 문제의 해결 대안으로 사용되어 왔으나 동적 환경변화 및 이주비용에 대한 특징을 고려하는 문제와 정적으로 결정된 순서로 노드를 이주하는 순차 구조로서 네트워크 부하, 노드 장애 및 서비스 부재와 같은 문제들은 여전히 이동 에이전트 성능에 관련된 밀접한 문제로 남아있다. 따라서 본 논문에서는 이러한 이동 에이전트의 성능에 주요한 영향을 미치는 문제를 하이브리드 이주 기법을 통해 해결하고자 하며 이를 위한 구조를 설계한다. 제안 기법은 순차와 병렬 이주 기법을 통합한 것이며 노드의 이주 스케줄 정보는 네이밍 에이전트의 메타데이터에 의해 결정된다. 이를 위해 이주 스케줄 정보의 생성 및 갱신에 대한 내용을 기술하며 이동 에이전트 복제를 통한 병렬 이주 기법과 선택적 이주 노드를 결정하는 이주 기법을 통합한 하이브리드 이주 기법을 제시한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.479-483
• /
• 2010

In this paper, a study for hybrid rocket combustion with cylindrical multi-port grain and swirl injector was performed to take advantage of regression rate. Change of the regression rate in the multi-port grain the placement of a swirl Injector experiments were performed. The results of multi-port grain using swirl injector were showed that the regression rate was increased compare with the shower head type injector.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.7 s.112
• /
• pp.739-745
• /
• 2006

This paper presents a novel type of hybrid dispensing head for IC fabrication and surface mount technology. The proposed mechanism consists of solenoid valve and piezoelectric stack as actuators, and provides positive-displacement and jet dispensing. The positive-displacement dispensing can produce desired adhesive amount without viscosity effect, while the jet dispensing can produce high precision adhesive amount. In order to determine the relationship between required voltage of the piezoelectric actuator and needle displacement, both static and dynamic analysis are undertaken, In addition, finite element analysis is performed in order to find optimal design parameters. Dispensing flow rate and pressure in the chamber are evaluated through fluid dynamic model.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.821-826
• /
• 2006

This paper presents a novel type of hybrid dispensing head for IC fabrication and surface mount technology. The proposed mechanism consists of solenoid valve and piezoelectric stack as actuators, and provides positive-displacement and jet dispensing. The positive-displacement dispensing can produce desired adhesive amount without viscosity effect, while the jet dispensing can produce high precision adhesive amount. In order to determine the relationship between required voltage of the piezo actuator and needle displacement, both static and dynamic analysis are undertaken, In addition, finite element analysis is performed in order to find optimal design parameters. Dispensing flow rate and pressure in the chamber are evaluated through fluid dynamic model.