Energy Absorption Characteristics for Spot Welded Hat-shaped Section Members at Various Velocities

속도변화에 따른 점용접된 모자형단면부재의 에너지흡수 특성

  • 심재기 (조선대학교 메카트로닉스공학과) ;
  • 차천석 (조선대학교 첨단소재부품 금형기술인력양성 사업단) ;
  • 양인영 (조선대학교 기계설계공학과)
  • Published : 2006.12.15

Abstract

Front-end side members of vehicles are structures with the greatest energy absorbing capability in a front-end collision of vehicles. This paper was undertaken to analyze the energy absorption characteristics of spot welded hat and double hat-shaped section members under the axial collapse. The experiments were performed with respect to the various collapse velocities. It was expected that para-closed sections would show collapse characteristics which be quite different from those of perfectly closed sections. The collapse velocities were selected as follows: the velocities in the hat-shaped section members were 0.00017m/sec, 0.017m/sec, 4.7m/sec, 6.5m/sec, 6.8m/sec, 7.2m/sec, and 7.3m/sec those in the double hat-shaped section members were 0.00017m/sec, 0.017m/sec, 6.5m/sec, 6.8m/sec, 7.2m/sec 7.3m/sec, and 7.9m/sec. In the program system presented in this study, an explicit finite element code, LS-DYNA3D, is adopted for simulating complicated collapse behavior of the hat and double hat-shaped section members under the same condition of the collapse test. The validity of simulation was confirmed by the comparison between the simulation result and the collapse experiment.

Keywords

References

  1. John, F., 1996, Handbook of Vehicle Design Analysis, Society of Automotive Engineers, Inc., pp. 9-12
  2. Haug, E., Clinckemaillie, J., Ni X., Pickett, A. K. and Queckborner, T., 1996, 'Recent Trends and Advances in Crash Simulation and Design of Vehicles,' Proceedings of the NATO-ASI, July, pp. 343-359
  3. Syamal, P. K. and Bhatti, M., 1995, 'Rear Full overlap High Speed Car-to-Car Impact Simulation,' SAE Paper No. 951085
  4. Hanssen, A. G., Langseth, M. and Hopperstad, O. S., 1999, 'Static Crushing of Square Aluminium Extrusions with Aluminium Foam Filler,' International Journal of Mechanical Science, Vol. 41, pp. 967-993 https://doi.org/10.1016/S0020-7403(98)00064-2
  5. Singace, A. A., 1999, 'Axial Crushing Analysis of Tubes Deforming in the Multi-Lobe Mode,' International Journal of Mechanical Science, Vol. 41, pp. 865-890 https://doi.org/10.1016/S0020-7403(98)00052-6
  6. Avalle, M. and Belingardi, G., 1997, 'Experimental Evaluation of the Strain Field History During Plastic Progressive Folding of Aluminium Circular Tubes,' International Journal of Mechanical Science, Vol. 39, No. 5, pp. 575-583 https://doi.org/10.1016/S0020-7403(96)00063-X
  7. White, M. D. and Jones, N., 1999, 'Experimental Quasi-Static Axial Crushing of Top-Hat and Double-Hat Thin-Walled Sections,' International Journal of Mechanical Science, Vol. 41, pp. 179-208 https://doi.org/10.1016/S0020-7403(98)00047-2
  8. White, M. D., Jones, N. and Abramowicz, W., 1999, 'A Theoretical Analysis for the Quasi-Static Axial Crushing of Top-Hat and Double-Hat Thin-Walled Sections,' International Journal of Mechanical Sciences, Vol. 41, pp. 209-233 https://doi.org/10.1016/S0020-7403(98)00048-4
  9. Cha, C. S., Kang, J. Y. and Yang, I. Y., 2001, 'Axial Impact Collapse Analysis of Spot Welded Hat Shaped Section Members,' KSME International Journal, Vol. 15, No. 2, pp. 180-191
  10. Grzebieta, R. H. and Murray, N. W., 1986, 'Energy Absorption of an Initially Imperfect Strut Subjected to an Impact Load,' International Journal of Impact Engineering, Vol. 4, pp. 147-159 https://doi.org/10.1016/0734-743X(86)90002-3
  11. Mahmood, H. F. and Paluzny, A., 1981, 'Design of thin walled columns for crash energy management-their strength and model of collapse,' Proc. 4rd International Conference on Vehicle Structural Mechanics, Nov.18-20, Detroit:7-18
  12. Lee, J. S., Kim, Y. R. and Lee, K. S., 1996, 'Sensitivity Analysis and Optimal Design of Plane Vehicle Frame Structures,' Journal of the Korean Society of Machine Tool Engineers, Vol. 5, No. 4, pp. 74-81
  13. Choi, G. H., 1999, 'A Study on the Lightweight Design of a Seat Frame in Automotive Vehicles,' Journal of the Korean Society of Machine Tool Engineers, Vol. 8, No. 5, pp. 83-89