한국전기전자재료학회논문지 (Journal of the Korean Institute of Electrical and Electronic Material Engineers)

  • 제19권12호
  • /
  • Pages.1092-1098
  • /
  • 2006
  • /
  • 1226-7945(pISSN)
  • /
  • 2288-3258(eISSN)
한국전기전자재료학회 (The Korean Institute of Electrical and Electronic Material Engineers)
권호 표지
DOI QR코드

DOI QR Code

Pb(Zr0.7Ti0.3)O3 후막의 강유전 특성에 전구체 용액의 코팅요소가 미치는 영향

Influence of Precursor Solution Coating Parameters on Ferroelectric Properties of Pb(Zr0.7Ti0.3)O3 Thick Films

  • 박상만 (경상대학교 공학연구원 세라믹공학과, i-cube 사업단) ;
  • 윤상은 (경상대학교 공학연구원 세라믹공학과, i-cube 사업단) ;
  • 이성갑 (경상대학교 공학연구원 세라믹공학과, i-cube 사업단)
  • 발행 : 2006.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The influence of the concentration of precursor solution and the number of solution coatings on the densification of the $Pb(Zr_xTi_{1-x})O_3$ (PZT) thick films was studied. PZT powder and PZT precursor solution were prepared by3 sol-gel method and PZT thick films were fabricated by the screen-printing method on the alumina substrates. The composition of powder and precursor solution were PZT(70/30) and PZT(30/70), respectively. The PZT precursor solution was spin-coated on the PZT thick films. A concentration of a coating solution was 0.5 to 2.0 mol/L[M] and the number of coating was repeated from 0 to 6. The XRD patterns of all PZT thick films shelved typical perovskite polycrystalline structure. The porosity of the thick films was decreased with increasing the number of coatings and 6-time coated films with 1.5 M showed the dense microstructure and thickness of about $60{\mu}m$. The relative dielectric constant of the PZT thick film was increased with increasing the number of solution coatings and the thick films with 1.5 M, 6-time coated showed the 698. The remanent polarization the 1.5 M and 6-time coated PZT thick films was $38.3{\mu}C/cm^2$.

키워드

참고문헌

  1. J. F. Scott and C. A. Paz de Araujo, 'Ferroelectic memories', Science, Vol. 246, p. 1400, 1989
  2. Sanchez, L. E., Naik, I. K., Watanabe, S. H., Leybovich, I. S., 'Process technology developments for GaAs ferroelectric nonvolatile memory', Integrated Ferroelectrics, Vol. 2, p. 231, 1992
  3. S. Sinharoy, H. buhay, D. R. Lampe, and M. H. Francombe, 'Intergration of ferroelectric thin films into nonvolatile memories', J. Vac. Sci. Technol. A., Vol. 10, No. 4, p. 1554, 1992
  4. S. E. Shaheen, R. Radspinner, N. Peyghambarian, and G. E. Jabbour, 'Fabrication of bulk heterojunction plastic solar cells by screen printing', Applied Physics letters, Vol. 79, No. 18, p. 2996, 2001 https://doi.org/10.1063/1.1408605
  5. L. Simon, Le Dren, and P. Gonnard, 'PZT and PT screen printed thick films', J. Eur. Ceram. Soc., Vol. 21, p. 1441, 2001 https://doi.org/10.1016/S0955-2219(01)00160-1
  6. J. F. Fenandez and E. Nieto, 'Processing and microstructure of porous and dense PZT thick films of $Al_2O_3$ ', J. of Materials Science, Vol. 30, p. 5399, 1995
  7. G. H. Lee and K. C. Kang, 'Ceramic Eng. for Dielectric', Dae Kwang, p. 189, 2002
  8. K. Okazaki and K. Nagata, 'Effects of grain size and porosity on electrical and optical properties of PLZT ceramics', J. Am. Ceram. Soc., Vol. 56, p. 82, 1973