절곡된 단면을 갖는 얇은 판요소 콘크리트 충전 각형강관 기둥의 부착거동

Bond Behavior of Thin-Walled Rectangular Profiled Steel Sheet Concrete Short Columns

본 연구는 콘크리트로 충전한 절곡된 단면을 갖는 각형강관 기둥의 부착특성을 매입인발(Pull-out) 시험을 통해 평가하였다. 시험체는 단면 $250{\times}250mm$의 강관 단면에 콘크리트를 충진한 PSSC기둥으로 표준형(P), 사다리꼴(I), 직사각형(II), 역사다리꼴(III)의 4가지 형태(Fig. 3)와, 부착길이에 대한 폭비 (L/D=2.0, 2.5, 3.0) 단면의 폭두깨비(d/t)으로 설정하여 총 13로 하였다. 실험결과 얇은 판요소 절곡된 강관과 콘크리트의 부착거동은 일반적인 부착거동과 유사하게 화학적 부착과 기계적 부착의 형태로 거동하였으며, 부착응력은 강판의 절곡형태가 (equation omitted)순으로 높게 나타났다. 또한 (equation omitted)타입 시험체의 경우에는 얇은 판요소를 갖는 단면임에도 불구하고 AIJ에서 제시하고 있는 $0.147N/mm^2$의 값을 상회하는 것으로 나타나 부착응력을 고려할 수 있을 것으로 판단되었다.

The paper is presented experimental study results on bond stress between profiled steel and concrete in Profiled SPC(Profiled Steel Plate Concrete) rectangular steel tubes through an experimental program in which 13 pull-out specimens were tested. Advantages and class of composite members and current problems of construction work are noted, past research of PSSC is described. An experimental study is described and evaluated. The bond capacity is interrelated with slip at the steel concrete interface. The factors influencing the mechanism of bond stress transfer were the cross section shape, length/diameter, diameter/thickness and environmental parameters (temperature, moisture). The results of experimental program indicated that the force transfer could be characterized into two regions The first region was governed by bond with no relative slip between the profiled steel and concrete. The second region occurs after the chemical debonding. Bond stress transfer in this region was governed by frictional resistance between profiled steel and concrete and cross section shapes. The important factors influencing the magnitude of frictional resistance are the profiled steel shapes, length/diameter and environmental parameters. (temperature, moisture)