초록
현재 Direct Georeferencing은 지난 10여년 적용되어오던 GPS-항측의 단점인 항공사진의 6개 외부표정요소중 단지 투영중심의 위치만 제공하던 약점을 극복하고 실무에 보편적으로 적용되고 있는 실정이다. 이의 가장 큰 장점은 지상기준점 측량작업의 절감내지는 이를 완전히 생략할 수 있다는 점이다. 본 본문은 상용의 GPS/IMU 를 이용하여 외부표정요소 결정에 대한 실힘 결과를 소개하였다. 실힘을 위하여 사진축척 1:5,000의 대축척과 1:20,000의 중축척으로 촬영한 관측자료를 처리하여 사진축척의 변화를 고려한 외부표정요소 결정의 정확도 및 결합블럭조정의 특성 등 다양하고 의미 있는 결과들을 도출하였다.
More than ten years after the era of GPS-Photogrammetry which could provide us only three projection center of all six exterior orientation parameters, direct georeferencing with GPS/INS is now becoming a standard method for image orientation. Its main advantage is to skip or reduce the indirect ground control process. This paper describes the experimental test results of integrated sensor orientation with a commercial GPS/IMU system to approve its performance in determination of exterior orientation. For this purpose two different imaging blocks were planned and the area was photographed at a large photo scale of 1:5,000 and a medium photo scale of 1:20,000. From these data set a variety of meaningful results was acquired, i.e., the accuracy. potential of exterior orientation from direct georeferencing and combined block adjustment using these data considering different photo scales and conditions.