DOI QR코드

DOI QR Code

콘크리트 보강용 FRP 보강근의 표면형상 변화에 따른 부착 특성

Bond Performance of FRP Reinforcing Bar by Geometric Surface Change

  • 박찬기 (건국대학교 사회환경시스템공학과) ;
  • 원종필 (건국대학교 사회환경시스템공학과)
  • 발행 : 2004.01.01

초록

FRP rebar has low bond performance than steel rebar. Usually, FRP rebar has about 60% of bond strength of steel rebar. Without adequate bond to concrete, the full composite action between reinforcement and concrete matrix can not be achieved. Therefore, FRP rebars must also have surface deformations that provide good bond to concrete. The purpose of this research was decided an optimum surface deformation patterns through bond test of FRP rebar. Eighteen surface deformation patterns of FRP rebar with widely different geometries were investigated. Based on the test results, we established optimum surfale deformation pattern. Bond tests were performed for three types of surface deformation patterns of FRP rebar including sand coated rebar, ribbed rebar, and wrapped and sand coated rebar that commercially available, and two types of FRP rebar including CFRP, GFRP rebars that optimum surface deformation pattern is applied. According to bond test results, FRP rebars that optimum surface deformation pattern is applied were found to have better bond strength with concrete than currently using FRP rebar.

키워드

참고문헌

  1. ACI Report 440R. 1996, State-of-the-art report on fiber reinforced plastic reinforcement for concrete structure, reported by ACI Committee 440, Detroit, MI, USA
  2. ACI, 2000, Guide for the Design and Construction of Concrete Reinforced with FRP bars, ACI Committee 440
  3. Aldulaijan, S.U., Nanni, A., AIZahrani, M.M., and Bakis, C.E., 1996, Bond Evaluation of Environmentally Conditioned GFRP/Concrete System, Proceedings of the Second International Conference on Advanced Composite Materials in Bridges and Structures (ACMBS-2), M. M. El-Badry, Ed., Canadian Society for Civil Engineering, Montreal, Quebec, pp, 845-852
  4. Bakis, C. E., Freimanis, A. J., Gremel, D., and Nanni, A, 1998, Effect of Resin Material on Bond and Tensile Properties of Unconditioned and Conditioned FRP Reinforcement Rods, Proceedings of the First international Conference on Durability of Composites for Construction, B. Benmokrane, and H. Rahman, Eds., Sherbrooke, Quebec, pp. 525-535
  5. Bank, L.C.; Puterman, M.; and Katz, A., 1998, The Effect of Material Degradation on Bond Properties of FRP Reinforcing Bars in Concrete, ACI Materials Journal, V. 95, No. 3, pp. 232-243
  6. Chaallal, O. and Benmokrane, B., 1993, Pullout and Bond of Glass - Fibre Rods Embedded in Concrete and Cement Grout, Materials and Structures, 26, pp.167-175 https://doi.org/10.1007/BF02472934
  7. Faza, S.S., and GangaRao, H.V.S., 1990, Bending and Bond Behavior of Concrete Beams Reinforced with Plastic Rebars, Transportation Research Record 1290, pp. 185-193
  8. Freimanis, A.J.: Bakis, C. E.; Nanni, A.; and Gremel, D., 1998, A Comparison of Pullout and Tensile Behaviors of FRP Reinforcement for Concrete, Proceedings of the Second International Conference on Composites in Infrastructure (ICCI-98), Tucson, Arizona, V. 2, pp. 52-65
  9. Johnston, D.W. and Zia, P., 1982, Bond Characteristics of Epoxy Coated Reinforcing Bars, Report No. FHWA/NC/82-002, North Carolina State University, Raleigh, North Carolina
  10. Park, C. G, and J.P. Won., 2004, Tensile Behavior and Fracture Properties of Ductile Hybrid FRP Reinforcing Bar for Concrete Reinforcement, Journal of the korean society of agricultural engineers, Vol. 46, No. 1, pp. 41-51