References
- Osinski, E. J., Barr, P. V. and Brimacombe, J. K., 1993, 'Mathematical Model for Tall Coke Oven Battery Part 1 : Development of the Thermal Model for Heat Transfer within Oven Charge,' Ironmaking and Steelmaking, Vol. 20, No. 5, pp. 350-361
- Osinski, E. J., Barr, P. V. and Brimacombe, J. K., 1993, 'Mathematical Model for Tall Coke Oven Battery- Part 2 : Calculation of Gas Flow and Related Phenomena for Oven Charge,' Ironmaking and Steelmaking, Vol. 20, No. 6, pp. 453-467
- Young, R. W., 1977, 'Dynamic Mathematical Model of Sintering Process,' Ironmaking and Steelmaking, Vol. 7, No. 6, pp. 321-328
- Cumming, M. J. and Thurlby, J. A., 1990, 'Developments in Modelling and Simulaion of Iron Ore Sintering,' Ironmaking and Steelmaking, Vol. 17, pp. 245-254
- Nath, N. K., Silva, A. J. and Chakraborti, N., 1997, 'Dynamic Process Modeling of Iron Ore Sintering,' Steel Research, Vol. 68, pp. 285-292 https://doi.org/10.1002/srin.199701791
- Ramos, M. V., Kasai, E., Kano, J. and Nakamura, T., 2000, 'Numerical Simulation Model of the Iron Ore Sintering Process Directly Describing the Agglomeration Phenomenon of Granules in the Packed Bed,' ISIJ International, Vol. 40, pp. 448-454 https://doi.org/10.2355/isijinternational.40.448
- Austin, P. R., Nogami, H. and Yagi, J., 1997, 'A Mathematical Model of Four Phase Motion and Heat Transfer in the Blast Furnace,' ISIJ International, Vol. 37, pp. 458-467 https://doi.org/10.2355/isijinternational.37.458
- Min, J., Shin, D. and Choi, S., 1999, 'An Experimental Study on the Bed Combustion Phenomena in MSW (Municipal Solid Waste) Incinerator,' Trans. KSME B, Vol. 23, No. 2, pp. 159-165
- Ryu, C., Shin, D. and Choi, S., 2002, 'Combined Bed Combustion and Gas Flow Simulation for a Grate Type Incinerator,' J. of Air and Waste Management Associaion, Vol. 52, No. 2, pp. 189-197 https://doi.org/10.1080/10473289.2002.10470769
- Yang, W., Ryu, C. and Choi, S., 2002, 'Modeling of Combustion and Heat Transfer in the Iron Ore Sintering Bed,' J. of the Korean Society of Combustion, Vol. 7, No. 3, pp. 23-31