DOI QR코드

DOI QR Code

Fabrication of YBCO Superconducting Thick Film by Use of Lateral Shaky Field Assisted EPD Method

측면진동보조전계 전기영동 전착방식을 적용한 YBCO 초전도 후막의 제작

  • Published : 2003.11.01

Abstract

In order to improve the surface uniformity and the conduction properties of the fabricated YBCO thick films, a system that applies alternating field vertically to the EPD field has been developed for the first time and applied to the electrophoretic deposition process. The applied alternating electric field, so called Shaky Alternating Assisted Field, caused a force to be exerted on each YBCO particle and resulted in a shaking of the particle in the direction of applied electric field, accomplishing a uniform particle orientation. The usual commercial electrical power was used for the vertically applied alternating voltage and the induced electric field was 25-120 V/cm at 60Hz. The thick film fabricated by the method developed in this paper showed better surface uniformity without crack and porosity and improved film characteristics such as critical temperature (Tc,zero = 90 K) and critical current density (2354 A/$\textrm{cm}^2$), Therefore, it is expected that the shaky-aligned electrophoretic deposition method can be used to fabricate superconductor films through a simpler process and at less expense.

Keywords

References

  1. 한국전기전자재료학회지 v.12 no.10 후막전착 YBCO 초전도선재 제조연구(Ⅰ) 소대화;박정철;이영매;추순남
  2. IUMRS-ICAM′99 Preparation of superconducting YBCO thick film by electrophoresis D.W.Soh;Y.M.Lee;Y.J.Cho;J.C.Park
  3. Physica C v.337 no.1-4 Preparation of YBCO superconducting thick film by electrophoresis Soh D.;Shan Y.;Park J.;Li Y.;Cho Y. https://doi.org/10.1016/S0921-4534(00)00053-8
  4. 한국전기전자재료학회지 v.16 no.2 보조전계를 이용한 전기영동 초전도 막의 제작 소대화;전용우 https://doi.org/10.4313/JKEM.2003.16.2.157
  5. Trans. on KEEM v.3 no.2 Zone-melting process of NdBaCuO under low oxygen pressure Soh Deawha;Fan Zhanguo;Gao Weiying