소매산 높이에 따른 소매달림선 하부곡선상의 봉제조건에 관한 연구

A study on the Sewing Condition of the Lower part of the Armhole Seam by Cap Heights

  • 이명희 (부경대학교 패션디자인전공)
  • 투고 : 2002.03.20
  • 발행 : 2002.06.30

초록

An investigation was made of the angle of bias on the lower part of the armhole line of the back bodice and that on the lower part of the sleeve cap curve line by cap heights, and then it was made of the lock stitch seam strength and elongation on the matching angles, the stitch density (26 stitches/3cm, 19 stitches/3cm, 14 stitches/3cm, and the samples (a cotton fabric and two kinds of cotton mixed polyester fabric). The matching angles of the machine-sewed samples are $30^{\circ}/-30^{\circ}$, $30^{\circ}/-45^{\circ}$, $45^{\circ}/-45^{\circ}$ and $60^{\circ}/-60^{\circ}$ by the analysis of the angles of bias on the lower part of the armhole seam. In view of the results of the seam strength and elongation, the reasonable sewing condition of the lower part of the armhole seam was 19 stitches/3cm.

키워드

참고문헌

  1. 이명희. 최석철 (1997) 의복패턴상에서 직물의 각도변화에 따른 봉합강도. 한국의류학회지, 21(4), 710-717
  2. 이명희 (1999) 재단각도 변화에 따른 오그림에 관한 연구(제2보)-소매산 높이에 따른 각도변화를 중심으로-. 한국의류학회지, 23(3),353-360
  3. 김혜경 외 7명 (2001) "피복인간공학 실험설계방법론". 교문사, 서울,pp.216-221
  4. 임원자 (1998) "의복구성학". 교문사, 서울. pp.8-19
  5. 국립기술품질원 (1998) "국민표준체위 조사결과에 따른 체형분류 연구". pp.171-253
  6. 한국봉제과학연구소 (1995) "의류제품 제조기술 기준서(작업표준서)". 서울, pp.353-425
  7. 薦律諒代. 平閣和普子. 石毛フミ子 (1975) 2枚の布の雜合强さ. 日本家政學會誌, 26(3), 202-205
  8. 石原ミキ (1966) ミシン縫目駱の强さに關する硏究(第2報). 日本家政學會誌, 17(4), 227-230