참고문헌
- Min-Soo Kim, Jong-Rip Kim, Jae-Young Jeon and Dong-Hoon Choi, 2001, 'Design Optimization Using Two-Point Diagonal Quadratic Approximation,' Transactions of the KSME, A, Vol. 25, No. 9, pp. 1423-431
- Parkinson, A., Sorensen, C. and Pourhassan, N., 1993, 'A General Approach for Robust Optimal Design,' ASME Journal of Mechnical Design, Vol. 115, pp. 74-80 https://doi.org/10.1115/1.2919328
- Parkinson, A. and Emch, G., 1993, 'Using Engineering Models to Control Variability: Feasibility Robustness for Worst-Case Tolerances.' ASME Advances in Design Automation, DE-Vol. 65-1, pp.411-418
- Parkinson, A. and Emch, G., 1994, 'Robust Optimal Design for Worst-Case Tolerances,' ASME Journal of Mechanical Design, Vol. 116, pp. 1019-1025 https://doi.org/10.1115/1.2919482
- Chen, W., Tsui, K. Allen, J. K. and Mistree, F., 1995, 'Integration of the Response Surface Methodology with the Compromise Decision Support Problem in Developing a General Robust Design Procedure,' Advances in Design Automation, ASME DE-Vol. 82
- Chen, W., Tsui, K., Allen, J. K. and Mistree, F., 1996, 'A Procedure for Robust Design: Minimizing Variations Caused by Noise Factors and Control Factors,' ASME Journal of Mechanical Design, Vol. 118, pp. 478-485 https://doi.org/10.1115/1.2826915
- Su, J. and Renad, J. E., 1996, 'AuAIAA Journaltomatic Differentiation in Robust Optimization,' AIAA Journal, Vol. 35, No. 6, pp. 201-215
- Sobieski, J. S., Barthelemy, J. E. and Riley, K. M., 1982, 'Sensitivity of Optimum Solution of Problem Parameters,' AIAA Journal, Vol. 20, No. 9, pp. 1291-1299 https://doi.org/10.2514/3.51191
- Chen, J. S. -C., Wang, S. and Zug, P., 1984, 'Optimal Tolerance Design of Printer Actuator,' ASME Journal of Mechanisms, Transmissions, and Automation in Design, Vol. 106, pp. 510-517 https://doi.org/10.1115/1.3258603
- Balling, R. J., Free, J. C. and Parkinson, A. R., 1986, 'Consideration of Worst-Case Manufacturing Tolerances in Design Optimization,' ASME Journal of Mechanical Design, Vol. 108, No. 4, pp. 438-441
- d'Entrenont, K. L. and Ragsdell, K. M., 1988, 'Design for Latitude Using TOPT,' Proceedings of ASME Advances in Design Automation, DE-Vol. 14, pp. 265-272
- Box, G. and Fung, C., 1986, 'Studies in Quality Improvement,' University of Wisconsin, Feb. Journal of Quality Technology
- Sundaresan, S., Ishii, K. and Houser, D. R., 1989, 'A Procedure Using Manufacturing Variance to Design Gears with Minimum Transmission Error,' ASME Advances in Design Automation, Design Automation and Design Optimization, DE-Vol. 19-2, pp. 145-151
- Nair, V. N., 1992, 'Taguchi's Parameter Design: A Panel Discussion,' Technometrics, Vol. 34, No. 2, pp. 127-161 https://doi.org/10.2307/1269231
- Ramakrishnan, B. and Rao, S. S., 1991, 'A Robust Optimization Approach Using Taguchi's Loss Function for Solving Nonlinear Optimization Problems,' ASME Advances in Design Automation, DE-Vol. 32-1, pp. 241-248
- Rao, S. S., 1992, 'Reliabillity Based Design,' McGraw Hill, pp. 127-133
- Otto, J. N. and Antonsson, E. K., 1991, 'Extensions to the Taguchi Method of Product Design,' ASME Design Theory and Methodology, DE-Vol. 3, pp. 21-30
- Belegundu, A. D. and Zhang, S., 1992, 'Robustness of Design through Minimum Sesitivity,' ASME Journal of Mechanical Design, Vol. 114, pp. 213-220 https://doi.org/10.1115/1.2916933
- Tsui, K. -L., 1992, 'An Overview of Taguchi Method and Newly Developed Statistical Methods for Robust Design,' IIE Transactions, Vol. 24, No. 5, pp. 44-57 https://doi.org/10.1080/07408179208964244
- Ramakrishnan, B. and Rao, S. S., 1994, 'An Efficient Strategy for the Robust Optimization of Large Scale Nonlinear Design Problems,' ASME Advances in Design Automation, DE-Vol. 69-2, pp. 25-35
- Chen, W., Wiecek, M. M. and Zhang, J., 1999, 'Quality Utility - A Compromise Programming Appproach to Robut Design,' ASME Journal of Mechanical Design, Vol. 121, pp. 179-187 https://doi.org/10.1115/1.2829440
- Sundarensan, S., Ishii, K. and Houser, D., 1995, 'A Robust Optimization Procedure with Variations on Design Variables and Constraints,' Engineerling Optimization, Vol. 24, pp. 101-117 https://doi.org/10.1080/03052159508941185
- Messac, A. and Sundararaj, G. J., 2000, 'A Robust Design Approach Using Physical Programming,' AIAA Journal
- Kwon-Hee Lee and Gyung-Jin Park, 1997, 'Robust Structural Optimization Considering the Tolerances of Design Variables,' Transactions of the KSME, A, Vol. 21, No. 1, pp. 112-123
- Reklatis. G. V., Ravindran, A. and Ragsdell, K. M., 1983, 'Engineering Optimization Methods and Applications,' John Wiley & Sons, pp. 11-15
- Vanderplaats, G. N., 1999, 'DOT(Design Optimization Tools) User's Manual: Version 5.0,' Vanderplaats Research & Development Inc., Colorado Springs