Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

A Study on Molding Process Fiber Reinforced Plastic Composites (Flow analysis Measurement of viscosity of Unidirectional Fiber Reinforced Plastic Composites)

섬유강화 플라스틱 복합재의 성형공정에 관한 연구(일방향 섬유강화 복합재의 점도측정 및 유동해석)

  • Published : 2001.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

During a compression molding process of Unidirectional Fiber Reinforced Plastic Composites, control of filling patterns in mold and distribution of fiber is needed to predict the effects of molding parameters on the flow characteristics. To obtain an excellent product and decide optimum molding conditions, it is important to know the relationship between molding conditions and viscosity. In this study, the anisotropic viscosity of the Unidirectional Fiber Reinforced Plastic Composites is measured by using the parallel plastometer. The model for flow state has been simulated by using the viscosity. The composites is treated as an incompressible New-tonian fluid. The effects of longitudinal/transverse viscosity ration A and slip parameter $\alpha$ on buldging phenomenon and mold filling patterns, are also discussed.

Keywords

References

  1. Trans. of the Socirty of Rheology v.21 no.2 Rheology of Concentrated Suspensions of Fibers in Tube FlowⅡ;An Exploratiry study R. O. Maschmeyer;C. T. Hill
  2. J. of Applied Polymer Science v.25 Sher Flow Rheological Properties, Fober Damage, and Mastication Characteristic of Aramid-Glass-and Cellulose Frber-Reinforced Polystrene Melts Lech Azarnecki;J.L. White
  3. Polymer Engineering and Science v.20 no.14 Rheology and Application to Injection Molding R. J. Crowson;M. J. Folkes
  4. J. of Applied Physics v.17 Theory and Application of the Parallel Plate Plastometer G. J. Dienes;H. F. Klemm
  5. 第35回 日本塑性加工聯合講演會論文集 no.331 長纖維强化プラスチシク複合材の押出加工(第1報,プラスチックと强化材の分離に關する理論的考察 北條英典;金二坤;玉川規一
  6. 第35回 日本塑性加工聯合講演會論文集 no.332 長纖維强化プラスチシク複合材の押出加工 (第2報,プラスチックと强化材の分離に關する實驗 北條英典;金二坤;玉川規一
  7. J. of Material Science v.14 The Evaluation of Non-Newtonnian Viscosity Using a Midified Parallil-Plate Plastometer R. Whiting;P. H. Jacobsen
  8. Intern. Polymer Proceeding v.3 Simulation of Compression Molding with MatrixFiber Sparation and Fiber Orientation for Long Fiber-Reinforces Thermoplastics Hojo, H.;Kim, E.G.;Yaguchi, H;Onodera, T.
  9. J. Applied Mechanics v.53 A Model for the Flow of a Chopped Fiber Reinforced Polymer Compound in Compression Molding Barone, M. R.;Caulk, D. A
  10. Polymer Composite v.6 Kinematics of Flow in Sheet Molding Compound Barone, M. R.;Caulk, D. A
  11. Polymer Composite v.6 Kinematics of Flow in Sheet Molding Compound Barone, M. R.;Caulk, D.A
  12. Polymer Composite v.9 no.2 A Bounday Element Analysis of Flow in Sheet Molding Compund Barone, M. R.;Osswald, T. A
  13. Advances in Composite Materials v.2 Flow States of Composite Materials in the Forging Die during the Molding Process Continued;Effects of Molding Temperature Hirai, T.;katayama, T.;hamada, H.
  14. Intern. Polymer ProcessingⅢ Simulation of Compress Molding with MatrixFiber Separation and Fiber Orientation for Long Fiber-Reinforced Thermoplastics Hojo, H.;Yaguchi,H.;Onodera, T.;Kim, E. G
  15. Intern. Polym. Process v.4 Position of Neutral Surface during Hollow Disk Compression Molding of Long Fiber-Reinforced Thermoplastics Hojo, H.;Kim, E.G.;Onodera, T.;Yaguchi, H.;Kim, S. H.;Koshimoto, M
  16. 대한기계학회 논문집 v.15 no.1 섬유강화 고분자 복합판의 압축성형에 있어서 금형-재료계면의 미끄럼을 고려한 유동해석 장수학;김석호;백남주;김이곤
  17. Polymer Composites v.1 Simulation of Compression Molding of Long-Glass-Fiber-Reinforced Thermoplastic Sheets Ducloux, R.;Vincent, M.;Agassant, J. F
  18. 한국복합재료학회지 v.9 no.1 섬유강화 고부자 복합재료의 압축성형에 있어서 이방성을 고려한 유동해석 조선형;임영호;김이곤
  19. 한국소성가공학회지 v.6 no.4 섬유강화 고분자 복합재료의 압축성형에 있어서 인장점성과 전단점성을 고려한 유동해석 조선형;김이곤