한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제18권3호
  • /
  • Pages.75-83
  • /
  • 2001
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

시작차용 의장부품 성형을 위한 하이브리드 림 몰드 개발

Development of Hybrid RIM Mold to Form Outfit-part for Prototype-cars

  • 양화준 (부산대학교 대학원) ;
  • 황부중 (부산대학교 대학원) ;
  • 이석희 (부산대학교 기계공학부 및 기계기술연구소)
  • Yang, Hwa-Jun (Graduate School of Busan National University) ;
  • Hwang, Po-Jung (Graduate School of Busan National University) ;
  • Lee, Seok-Hee (Mechanical Technology Research Center, Dept.of Mechanical Engineering, Busan National University)
  • 발행 : 2001.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

RIM(Reaction Injection Molding) is a widely used method to manufacture middle-large size outfit-part for a prototype car. The main advantage of RIM is the capability of manufacturing a small number of prototype parts with less cost and lead time than injection molding which is the most popular method to manufacture plastic parts. Generally, epoxy resin and RTV(Room Temperature Vulcanization) silicon are used as mold materials for RIM, and the selection of mold materials is usually depended upon the industrial environment of manufactures and it decides overall mold making process and part quality. This paper suggests a new mold making process by consolidating the advantages of epoxy resin and RTV silicon based RIM mold to enhance the parts quality while reducing the manufacturing cost and time and shows the competitiveness of the suggested process compared with conventional methods.

키워드

참고문헌

  1. Paul C.H. Lin, C.Y. Chin, S.R. Cheng and Jacob Chen, 'Manufacturing education for rapid prototyping,' Proceedings of the 2nd annual international conference on industrial engineering applications and practices, Vol. 2, pp. 1321-1331, 1997
  2. D.T. Pham and R.S. Gault, 'A comparision of rapid prototyping technologies,' International journal of machine tools & manufacture, Vol. 38, No. 10-11, 1998 https://doi.org/10.1016/S0890-6955(97)00137-5
  3. Kevin P. MCALEA, 'DTM'S Selective Laser Sintering technology: New products, New benefits, New manufacturing horizons,' The eighth international conference on rapid prototyping Tokyo, Japan, Vol. 1, pp. 347-352, 2000
  4. 허성민, 장복근, 최경현, 이석희, 'SLS에서의 자동적인 조형자세 및 배치 결정에 관한 연구,' 한국정밀공학회지, 제16권, 제11호, pp.139-147, 1999
  5. P.F. Jacobs, 'StreoLithography accuracy, QuickCast$^{TM}$ & rapid tooling,' ICALEO, p. 194, 1995
  6. L.L. Kimble, 'The selective laser sintering process: A path to rapid plastic part development,' Proceedings of the ANTEC '92, pp. 2431-2433, 1992
  7. Iuliano Luca, Settineri Luca and Gatto Andrea, 'Advance in both rapid prototyping and rapid tooling techniques,' Proceedings of the third facific RIM international conference on advanced materials and processing, Vol. 1, pp. 1631-1636, 1998
  8. Charles W. Hull and Thomas H. Pang, 'Recent advances in rapid prototyping and tooling technologies,' The eighth international conference on rapid prototyping, Tokyo, Japan, Vol. 1, pp. 341-346, 2000
  9. B. J. Arnold-Feret, 'Laser sintered short run tooling for injection molding,' Proceedings of the ANTEC '99, Vol. 1, pp. 1114-1117, 1999
  10. C. Nelson, 'Creation of plastic prototypes and molded plastic parts via selective laser sintering,' Proceedings of the ANTEC '99, Vol. 1, pp. 1109-1113, 1999
  11. A. Palmer and J. Colton, 'Design rules for stereolithography Injection molding inserts,' Proceedings of the ANTEC '99, Vol. 3, pp. 4002-4006, 1999
  12. Yarlagadda Pkdv, Christodoulou P, Subramanian VS, 'Feasibility studies on the production of electro-discharge machining electrodes with rapid prototyping and the electroforming process,' Journal of Materials Processing Technology, Vol. 89-90, pp. 231-237, 1999 https://doi.org/10.1016/S0924-0136(99)00072-2
  13. Paul Blake, 'Investment casting using FDM/ABS rapid prototyping patterns,' The eighth international conference on rapid prototyping Tokyo, Japan, Vol. 1, pp. 358-363, 2000
  14. 양화준, 황보중, 이석희, 'SLS 조형품을 이용한 수지형 블로우 몰드제작 및 시작차 부품성형에 관한 연구,' 한국정밀공학회지, 제17권, 제7호, pp.124-131, 2000
  15. Sung-Min Hur and Seok-Hee Lee, 'Study on the Reconstruction of Skull Prototype using CT image and Laser Scanner,' International Journal of the Korean Society of Precision Engineering, Vol. 1, No.1, pp. 146-151, 2000
  16. Serope Kalpakjian, 'Manufacturing processes for engineering materials,' pp. 573-575, Addison-wesley
  17. Joseph paxton, 'Benchmarking rapid tooling processes,' Rapid prototyping & manufacturing 99 conference and exposition rosemont illinois, Vol. 3, pp. 591-603, 1999
  18. Eiji Inui, 'PLT Rapid prototyping, high accuracy modeling, and tooling applications,' The eighth international conference on rapid prototyping Tokyo, Japan, Vol. 1, pp. 353-357, 2000
  19. Edward Scott, 'Bringing science to mold-life testing of silicon RTVs by CARLOS,' Rapid prototyping & manufacturing 99 conference and exposition rosemont illinois, Vol. 2, pp. 395-409, 1999
  20. http://www.industrialmodern.com/twr.html
  21. http://www.engineeringzones.com/tooling.htm