A Study on the Grinding Force Characteristics in the Internal Plunge Grinding

내면 플런지 연삭에 있어서 연삭력 특성에 관한 연구

  • 서영일 (금오공과대학교 기계공학과 대학원) ;
  • 허만승 (금오공과대학교 기계공학과 대학원) ;
  • 최환 (금오공과대학교 기계공학부) ;
  • 이종찬 (금오공과대학교 기계공학부) ;
  • 정선환 (금오공과대학교 기계공학부)
  • Published : 1999.12.01

Abstract

High precision internal plunge grinding is difficult because of the decrease in the quill stiffness due to the small diameter of wheel. In this paper, the characteristics of internal plunge grinding were investigated. Grinding experiments were performed at various grinding conditions with vitrified bonded CBN wheels. The grinding period was assumed to be consisted of rough grinding and fine grinding. The classification of grinding was determined int terms of the normal grinding forces and actual depth of cut. The experimental results indicate that the higher depth of cut and infeed speed result in the longer rough grinding time. The maximum normal grinding force was nearly equal to the static force and it decreases exponentially as the grinding continues.

Keywords