경사진 돌출부가 있는 비축대칭 복합단조의 상계요소해석

UBET Analysis of Combined Forging of Non-Axisymmetric Shapes With Inclined Protrusion

본 연구에서는 자유단조용 프레서를 이용하여 돌출부가 있는 비대칭 중공형단 조 제품을 생산할 수 있도록 금형장치를 설계.제작하고, Fig.1에서 보는 바와 같이 경 사진 돌출부가 있는 비축대칭 복합단조에 UBET를 적용하여 해석하였다. 단조시편은 원주형태를 가지도록 하였다. 즉 원주형 소재가 요구되는 비축대칭 단조제품으로 변 형되는 과정에서 단조하중, 재료가 돌출부를 충만하도록 하는 유동특성, 재료가 돌출 부로 차들어가는 속도 등에 영향을 주는 인자(예:펀치 직경의 크기, 금형 상하면의 각 도)의 특성을 이론적으로 해석하고 실험으로 확인하였다.

The study is concerned with the analysis of combined forging of non-axisymmetric shapes with inclined protrusions by UBET technique. Work hardening is considered for the given range of strain rate during the forging process. A complex shape with inclined cavities is analyzed by subdividing the workpiece into finite UBET elements for which simple velocity fields are applicable. An experimental set-up was designed and manufactured for the experiment, and experiments are carried out with lead billets. The devised set-up can be used for closed-die forging of complex shapes with protrusions in which the dies can be separated automatically for easy removal of the forged products. Based on the derived kinematically admissible velocity fields for corresponding UBET elements, general computer programs have been developed. Since the energy dissipation rate for each elemental region is provided by subprograms (Subroutine or Function), the developed program can be applied to the forging problems of various shapes. The present study has shown that the method developed can be effectively applied to forging of non-axisymmetric shapes with complicated protrusions.