• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.101-101
• /
• 2010

Anaerobic digestion(AD) is the most promising method for treating and recycling of different organic wastes, such as organic fraction of municipal solid waste, household wastes, animal manure, agro-industrial wastes, industrial organic wastes and sewage sludge. During AD, i.e. organic materials are decomposed by anaerobic forming bacteria and fina1ly converted to excellent fertilizer and biogas which is a mixture of carbon dioxide and methane. AD has been one of the leading technologies that can make a large contribution to produce renewable energy and to reduce $CO_2$ and other green-house gas(GHG) emission, it is becoming a key method for both waste treatment and recovery of a renewable fuel and other valuable co-products. Currently some 80% of the world's overall energy supply of about 400 EJ per year in derived from fossil fuels. Nevertheless roughly 10~15% of this demand is covered by biomass resources, making biomass by far the most important renewable energy source used to date. The representative biofuels produced from the biomass are bioethanol, biodiesel and biogas, and currently biogas plays a smaller than other biofuels but steadily growing role. Traditionally anaerobic digestion applied for different biowaste e.g. sewage sludge, manure, other organic wastes treatment and stabilization, biogas has become a well established energy resource. However, the biowaste are fairly limited in respect to the production and utilization as renewable source, but the plant biomass, the so called "energy crops" are used for more biogas production in EU countries and the investigation on the biomethane potential of different crops and plant materials have been carried out. In Korea, with steadily increasing oil prices and improved environmental regulations, since 2005 anaerobic digestion was again stimulated, especially on the biogasification of different biowastes and agro-industrial biomass including "energy crops". This study have been carried out to investigate anaerobic biodegradability by the biochemical methane potential(BMP) test of animal manures, different forage crops i.e. "energy crops", plant and industrial organic wastes in the condition of thermophilic temperature, The biodegradability of animal manure were 63.2% and 58.2% with $315m^3CH_4/tonVS$ of cattle slurry and $370m^3CH_4/tonVS$ of pig slurry in ultimate methane yields. Those of winter forage crops were the range 75% to 87% with ultimate methane yield of $378m^3CH_4/tonVS$ to $450m^3CH_4/tonVS$ and those of summer forage crops were the range 81% to 85% with ultimate methane yield of $392m^3CH_4/tonVS$ to $415m^3CH_4/tonVS$. The forge crops as "energy crops" could be used as good renewable energy source to increase methane production and to improve biodegradability in co-digestion with animal manure or only energy crop digestion.

• KSBB Journal
• /
• v.23 no.5
• /
• pp.403-407
• /
• 2008

Recently, Candida antarctica lipase B (CalB) draws attention from industries for various applications for food, detergent, fine chemical, and biodiesel, because of its characteristics as an efficient biocatalyst. Since many industrial processes carry out in organic solvent and at high temperature, CalB, which is stable under harsh condition, is in demand from many industries. In order to reform CalB promptly, the expression system which has advantages of ease to use and low cost for gene libraries screening was developed using E. coli. The E. coli strains, Rosettagami with competence for enhanced disulfide bond formation, Novablue, and $DH5{\alpha}$, were exploited in this study. To obtain the soluble CalB, the pCold I vector expressing the cloned gene at $15^{\circ}C$ and the chaperone plasmids containing groES/groEL, groES/groEL/tig, tig, dnaK/dnaJ/grpE, and dnaK/dnaJ/grpE/groES/groEL were used for coexpression of CalB and chaperones. The colonies expressing functional lipase were selected by employing the halo plate containing 1% tributyrin, and the CalB expression was confirmed by SDS-PAGE. E. coli Rosettagami and $DH5{\alpha}$ harbouring groES/groEL chaperones were able to express soluble CalB effectively. From a facilitative point of view, E. coli $DH5{\alpha}$ is more suitable for further mutation study.

• Journal of Plant Biotechnology
• /
• v.37 no.3
• /
• pp.319-326
• /
• 2010

An interest in the production of seed-oil based fuel and raw materials, which comes from renewable plant sources, has been intrigued by the phenomenon of global warming and shortage of fossil fuels. Rapeseed (Brassica napus) is the most important oilseed crop, which produces seeds with 40% oil. It is desirable to develop genetically modified rapeseed producing oils, which can be easily converted to biodiesel. As an initial step for development of genetically modified rapeseed for the production of biofuels or bio-based materials, Korean rapeseed cultivars, Naehan, Youngsan, Tammi and Halla, were analyzed. Four Korean rapeseed cultivars produce 32 to 40% oil of seed dry weight, which is rich in oleic acid (more than 60 mole%). The cotyledonary petioles of rapeseed cultivar, Halla, were transformed using Agrobacterium tumefaciens strain GV3101, carrying the uidA gene encoding $\beta$-glucuronidase (GUS) as a reporter gene and the phosphinothricin acetyltransferase (PAT) gene as a selectable marker. The stable integration of PAT gene in the genome of transgenic rapeseeds was confirmed by PCR analysis. Expression of uidA gene in various rapeseed organs was determined by fluorometric assay and histochemical staining. Transformation efficiency of a Korean rapeseed Halla cultivar was 10.4%. Genetic inheritance of transgenes was confirmed in $T_2$ generation.

• Microbiology and Biotechnology Letters
• /
• v.44 no.3
• /
• pp.400-407
• /
• 2016

A unicellular green alga, Chlorella vulgaris KNUA027, was isolated from the roots of Panax ginseng seedlings and its biotechnological potential was investigated. The results of GC/MS analysis showed that C. vulgaris KNUA027 was rich in nutritionally important polyunsaturated fatty acids (PUFAs) such as alpha-linolenic acid (C_18:3 ω3, 45.8%, 50.8 mg/g) and hexadecatrienoic acid (C_16:3 ω3, 11.8%, 13.1 mg/g). Therefore, this Korean indigenous microalga may have potential as a source of omega-3 PUFAs. It was also found that the saturated palmitic acid (C_16:0, 37.1%, 41.2 mg/g), which is suitable for biodiesel production, was one of the major fatty acids produced by strain KNUA027. The proximate analysis showed that the volatile matter content was 88.5%, and the ultimate analysis indicated that the higher heating value was 19.8 MJ/kg. Therefore, the results from this research with C. vulgaris KNUA027 may provide the basis for the production of microalgae-based biofuels and biomass feedstock.

• Microbiology and Biotechnology Letters
• /
• v.48 no.3
• /
• pp.328-336
• /
• 2020

Parachlorella sp. is an efficient fatty acid producer that can be used in the production of biofuels, feeds, and fertilizers. Microalgae show varying responses to culture conditions, even those within the same species. In this study, growth and fatty acid composition of a newly isolated Parachlorella sp. from the Nakdong river of Korea in different culture media were investigated. The microalga was cultivated in 400 ml bubble column photobioreactors using BG-11, BBM, TAP, and modified TAP (MTAP) media. It was shown that using BBM led to greater fatty acid accumulation (34%), while using TAP medium led to greater biomass productivity (0.34 g/l/day). Composition of the TAP medium was modified to have the N:P ratio of BBM while also varying concentrations of N and P to improve fatty acid productivity. One of the modified TAP media, MTAP-1 (104.8 mgN/l, 135.2 mgP/l, N:P ratio = 0.77), showed the highest fatty acid concentration of 0.69 ± 0.04 g/l, while those from TAP and BBM were 0.48 ± 0.06 g/l and 0.40 ± 0.02 g/l, respectively. The results showed that microalgal fatty acid productivity could be enhanced by changing the N:P ratio and concentrations.

• Korean Chemical Engineering Research
• /
• v.43 no.5
• /
• pp.621-626
• /
• 2005

The esterification reaction of free fatty acid with methanol was investigated in the presence of catalyst, Amberlyst-15, producing fatty acid methyl ester, namely, biodiesel. In this paper, the effects of the reaction parameters such as reaction temperature, mole ratio of alcohol to oleic acid and mass of catalyst on the catalytic activity have been examined. The results showed that the reaction rate increased about twice as the temperature increased every $20^{\circ}C$ in the reaction temperature range from 333 K to 373 K. The equilibrium conversion rate of oleic acid increased with the feed mole ratio of alcohol to acid ranging from 6:1 to 44:1. When the feed mole ratio was higher than 44:1, all the results were similar to that of 44:1. As for the influence of the mass of catalyst, the initial reaction rate increased from 1.2 to 1.3 times as the mass of catalyst doubles in the range of the catalyst weight from 5 to 20 wt%. The experiment data obtained were well described by the second reaction rate using a pseudo-homogeneous model.

• Applied Chemistry for Engineering
• /
• v.27 no.3
• /
• pp.227-238
• /
• 2016

This review article highlights different types of nano-sized catalysts for the selective alcohol oxidation to form aldehydes (or ketones) with supported or immobilized metal nanoparticles. Metal nanoparticle catalysts are obtained through dispersing metal nanoparticles over a solid support with a large surface area. The nanocatalysts have wide technological applications to industrial and academic fields such as organic synthesis, fuel cells, biodiesel production, oil cracking, energy conversion and storage, medicine, water treatment, solid rocket propellants, chemicals and dyes. One of main reactions for the nanocatalyst is an aerobic oxidation of alcohols to produce important intermediates for various applications. The oxidation of alcohols by supported nanocatalysts including gold, palladium, ruthenium, and vanadium is very economical, green and environmentally benign reaction leading to decrease byproducts and reduce the cost of reagents as opposed to stoichiometric reactions. In addition, the room temperature alcohol oxidation using nanocatalysts is introduced.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.196-196
• /
• 2017

Oilseed crop Camelina (Camelina sativa L.) is a suitable for biodiesel production that has high adaptability under low-nutrient condition like marginal land and requires low-input cost for cultivation. Enhanced abiotic stress tolerance of Camelina is very important for oil production under the wide range of different climate. CsRCI2s (Rare Cold Inducible 2) are related proteins in various abiotic stresses that predicted to localized at plasma membrane (PM) and endoplasmic reticulum (ER). These proteins are consist of eight-family that can be divided into tail (CsRCI2D/E/F/G) and no-tail (CsRCI2A/B/E/H) type of C-terminal. However, it is still less understood the function of C-terminal tail. In this study, CsRCI2D/H genes were cloned through gateway cloning system that used pCB302-3 as destination vector. And we used agrobacterium-mediated transformation system for generation of overexpression (OX) transformants. Overexpression of target gene was confirmed using RT-PCR and segregation ratio on selection media. We analyzed physiological response in media and soil under abiotic stresses using CsRCI2D and CsRCI2H overexpression plant. To compare abiotic stresses tolerance, wild type and CsRCI2D/H OX line seeds were sown on agar plate treated with various NaCl and mannitol concentration for 7 days. In the test of growth rate under abiotic stress on media, CsRCI2H OX line showed similar to NaCl and mannitol stress. In the other hand, CsRCI2D OX line showed to be improved stress tolerance that especially increased in 200mM NaCl but was similar on mannitol media. In greenhouse, WT and CsRCI2D/H OX lines for physiological analysis and productivity under abiotic stresses were treated 100, 150, 200mM NaCl. Then it was measured various parameters such as leaf width and length, plant height, total seed weight, flower number, seed number. CsRCI2H OX line in greenhouse did not show any changes in physiological parameters but CsRCI2D OX line was improved both physiological response and productivity under NaCl stress. Among physiological parameters of CsRCI2D OX line under NaCl stress, leaf length and width were observed shorter than WT but it were slightly longer than WT in 200mM NaCl stress. Furthermore, total seed weight of CsRCI2D OX line under stress displayed to decrease than WT in normal condition, but it was gradually raised with increasing NaCl stress then more than WT relatively. These results suggested CsRCI2D might be contribute to improve abiotic stress tolerance. However, function of CsRCI2H is need to more detail study. In conclusion, overexpression of CsRCI2s family can generate various environmental stress tolerance plant and may improve crop productivity for bio-energy production.

• Journal of Plant Biotechnology
• /
• v.34 no.2
• /
• pp.111-118
• /
• 2007

Global warming crisis due primarily to continued green house gas emission requires impending change to renewable alternative energy than continuously depending on exhausting fossil fuels. Bioenergy including biodiesel and bioethanol are considered good alternatives because of their renewable and sustainable nature. Bioethanol is currently being produced by using sucrose from sugar beet, grain starches or lignocellulosic biomass as sources of ethanol fermentation. However, grain production requires significant amount of fossil fuel inputs during agricultural practices, which means less competitive in reducing the level of green house gas emission. By contrast, cellulosic bioethanol can use naturally-growing, not-for-food biomass as a source of ethanol fermentation. In this respect, cellulosic ethanol than grain starch ethanol is considered a more appropriate as a alternative renewable energy. However, commercialization of cellulosic ethanol depends heavily on technology development. Processes such as securing enough biomass optimized for economic processing, pretreatment technology for better access of polymer-hydrolyzing enzymes, saccharification of recalcitrant lignocellulosic materials, and simultaneous fermentation of different sugars including 6-carbon glucose as well as 5-carbon xylose or arabinose waits for greater improvement in technologies. Although it seems to be a long way to go until commercialization, it should broadly benefit farmers with novel source of income, environment with greener and reduced level of global warming, and national economy with increased energy security. Mission-oriented strategies for cellulosic ethanol development participated by government funding agency and different disciplines of sciences and technologies should certainly open up a new era of renewable energy.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.1
• /
• pp.136-147
• /
• 2015

As it carry out RPS(Renewable Portfolio Standards), power producers are using the power bio-fuel oil to meet their RPS quota. In this study, we test the quality characteristics of raw materials for power bio-fuel oil and the property changes of power bio-fuel oil by the kind of feedstocks. The power bio-fuel oil and feedstocks were analyzed for item of quality standard such as acid number, viscosity and metal contents. And it was analyzed for composition distribution by FT-IT and HPLC. Such as low priced palm oil series has high acid number and ash contents due to high free-fatty acid and metal contents. And by-product of biodiesel have a tendency of high viscosity. The fuel properties of power bio-fuel oil, such as viscosity, acid number and metal contents are correlated with the constituent and the mixing ratio of the feedstocks.