• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.1
• /
• pp.30-41
• /
• 2006

This paper shows mechanical Properties and behaviors of macrostructures for specimens welded by F.S.W according to welding conditions and tool dimensions with $6.35mm_t$ aluminum 7075-T651 alloy plate. It apparently results in defect-free weld zone in case transition speed was changed to 15mm/min 61mm/min and 124mm/min under conditions of tool rotation speed such as 800rpm. 1250rpm and 1600rpm respectively with tool's Pin diameter 40mm and 60mm. The optimum mechanical property, ultimate stress,${\sigma}_Y=470Mpa$ is obtained at the condition of 124mm/min of travel speed with 800rpm of tool rotation speed using full screw type pin. shoulder dia. $20{\phi}mm$ pin dia. $6{\phi}mm$ and pin length 6mm. The full-screw type and the half-screw type pin shows the similar behaviors of weldability. It is found that the size of nugget is depended on tool transition speed and tool dimension by macrostructures of the cross section of weld zone.

• Journal of Welding and Joining
• /
• v.30 no.2
• /
• pp.76-80
• /
• 2012

In this study, the effect of the welding current on the hardness characteristics and microstructure in the resistance spot welding of 1GPa grade cold-rolled DP steel was investigated, Also, correlation between the hardness and microstructure was discussed. In spite of the change in the welding current, the hardness distributions near weld was similar. the hardness in the HAZ and the fusion zone was higher than that of the base metal and the hardness in the fusion zone was variated with the location. Especially, the hardness of HAZ adjacent to the base metal showed maximum value, and softening zone in the base metal adjacent to HAZ was found. With the increasing of welding current, there were no difference in maximum hardness and average hardness in the fusion zone were, but the hardness of the softening zone reduced. The difference in the hardness in each location of weld due to grain size of prior austenite. The softening of the base metal occurred by tempering of the martensite.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.6
• /
• pp.380-386
• /
• 2001

This study was conducted to investigate the influence of the root zone temperature on the changes in soil physicochemical environment and the growth of the apple trees. Root zone temperatures applied were 20. 25. 30. and $35^{\circ}C$. A pot experiment of 4-year-old fruit-bearing Fuji/M.26 apple trees was done from May 15. 1997 to August 15. 1997. Shoot length and shoot number of 4-year-old Fuji/M.26 was longest at $30^{\circ}C$ but decreased at $35^{\circ}C$. Oxygen concentrations in soil air were maintained from 17 to 18% at $20^{\circ}C$ but fluctuated from 10 to 14% at the end at $35^{\circ}C$. Carbon dioxide concentrations in soil air was highest at $35^{\circ}C$. Organic matter contents in soil decreased as root zone temperature and duration of treatment increased. Nitrate and ammonium contents in soil increased with rising root zone temperature in the beginning but nitrate contents decreased at $35^{\circ}C$ as time progressed. Nitrate content was higher in 10~15cm subsoil than in 25~30cm subsoil.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3230-3242
• /
• 2015

In this study, in an attempt to elucidate the relevance and the association between AUDIT level and health related indices such as obesity-related indices (BMI, waist circumference, body fat percentage), serum liver-enzyme levels (AST, ALT, GGT, total bilirubin) and serum lipid levels (TC, TG, HDL-C, LDL-C), data about including results of health checkup examination and questionnaire from 558 male examinees of 30-79 years old, who received a comprehensive health examination in the health promotion center of a university hospital during the period of January 1 to December 31, 2012, was analysed. As a results, the distribution of AUDIT rating of subjects was Zone I 58.2%, Zone II 25.3%, Zone III 7.0%, and Zone IV 9.5%. And AUDIT levels have significant relevance with age, smoking, body fat, GGT and TG. Especially, for the waist circumference, GGT and TG, the odds ratio indicating abnormality significantly increased in the higher AUDIT groups (Zone II~Zone IV) than a low-grade group (Zone I). This suggests that drinking problem with a high AUDIT level has a significant relevance with an abnormal increase of indices for obesity, serum liver-enzyme levels, serum lipid levels.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.24 no.4
• /
• pp.41-56
• /
• 2022

This study aims to investigate the actual condition of wearing leggings and the preferred design of down-aging women in their 30s and 40s who have young sensibility, but are starting to enter a middle-aged body type. By analyzing the problems experienced when wearing leggings in this age group, this study intends to provide basic data for the development of a middle-aged female leggings pattern with an improved fit. Therefore, a survey was conducted on 214 women in their 30s and 40s. The results of the survey are as follows. Among down-aging women who want to look younger, leggings are becoming an essential item, but most leggings brands are producing leggings with patterns suitable for women in their 20s. The results of this study also showed that down-aging women in their 30s and 40s mainly purchase and prefer body-fitting leggings. However, they are experiencing discomfort due to 'Y-zone accentuate', 'undergarment accentuate', 'cloth stucking', and 'waist band curling and tightening'. The results indicate that women in their 30s and 40s, who are starting to change to a middle-aged body type, have fit problems. Women in their 20s generally prefer functions that improve the body line, while those in their 30s and 40s prefer functions that improve movement and cover problems caused by the abdomen and the Y-zone area. Therefore, when designing leggings for down-aging women in their 30s and 40s, based on body-fitting leggings, a material with excellent elasticity must be selected. Also develop patterns that solves 'Y-zone accentuate', 'undergarment accentuate', 'cloth stucking', and 'waist band curling and tightening' problems.

• Journal of the Korean Society of Safety
• /
• v.20 no.1 s.69
• /
• pp.30-35
• /
• 2005

This study proposes construction of through transmission for weld defects detection of rail weld zone from ultrasonic signals. For these purposes, the ultrasonic signals for defects(porosity and crack) of weld zone in rails are acquired in the type of time series data and echo strength. 6 lines in the distance amplitude characteristics curve(DACC) indicated damage evaluation standard of weld zone in rails. The acquired ultrasonic signals agree flirty well with the mesured results of reference block and sensitivity block(defect location beam propagation distance, echo strength, etc). The proposed construction of through transmission in this study can be used for weld defects detection of rail weld zone.

• Animal Systematics, Evolution and Diversity
• /
• v.28 no.1
• /
• pp.29-35
• /
• 2012

Two Spirostomum species collected from freshwater in Korea were identified as S. caudatum (Muller, 1786) and S. teres (Claparede and Lachmann, 1858). They are recorded for the first time in Korea. The description was based on the observation of living specimens and protargol impregnated specimens. Diagnostics of these species are as follows. Spirostomum caudatum: body size $400-450{\times}20-30\;{\mu}m$ in vivo, shaped long and slender with a tapered posterior part, highly contractile; macronucleus ellipsoid; adoral zone of membranelles occupied 30% of body length; somatic kineties 14-22 in number. Spirostomum teres: body size $240-460{\times}25-40\;{\mu}m$ in vivo, shaped long and slender with a flattened posterior end, highly contractile; cortical granules arranged in 2-3 rows; adoral zone of membranelles occupied 50% of body length; somatic kineties 20-30 in number; macronucleus ellipsoid; micronuclei 2-3 in number. Spirostomum caudatum and S. teres are the most similar congeners, but they are different in the posterior part of body (tail-like posterior part vs. flattened posterior end), length of adoral zone of membranelles in body length (1/3 vs. 1/2), and the number of somatic kineties (14-22 vs. 20-30). These populations match with European populations in morphological characters.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.5
• /
• pp.5-15
• /
• 2014

Rockfill zone is a main part of the CFRD for safety and it is important to evaluate the status such as shear wave velocity profile of the rockfill zone. A surface wave method can be used to evaluate the rockfill zone but general surface wave method can have a difficulty to be applied for valuation of rockfill zone because of a stiff slope of dam and background noise in the field. In this research, HWAW method is applied to evaluate the shear wave velocity of rockfill zone. The field test of the proposed method is simple and fast and the HWAW method can determine the reliable shear wave velocity profile under severe noise field condition. To show feasibility of the proposed method, numerical simulation and field tests were performed. Through the numerical and field tests, the applicability of the proposed method was shown.

• Journal of Korea Water Resources Association
• /
• v.48 no.8
• /
• pp.625-634
• /
• 2015

The diverse patterns of separation zone according to the marked bed discordance by dredging at confluence in addition to the confluence angle of tributary and discharge ratio between tributary and main channels have been analyzed by CCHE2D model simulation. The separation zone is defined by inside of zero velocity boundary at down-stream of confluence. The separation zone dose not formed at the $30^{\circ}$ of confluence angle of tributary. The size of separation zone increases as the discharge ratio and confluence angle increase in general. The separation zone decreases as the dredging depth increases which shows the relative momentum reduction compared by the flow volume increasing by dredging at confluence. The contraction factor with the variation of confluence angle and discharge ratio has been investigated and confirmed the corresponding conveyance decreasing results in backwater effect. The regression equation of shape factor with confluence angle and discharge and dredging depth ratios has been suggested.

• ALGAE
• /
• v.30 no.2
• /
• pp.139-146
• /
• 2015

Urchin barrens have been a major issue of rocky coastal ecosystems in temperate regions. In South Korea, the east coast and Jeju Island have especially been a focus because the area of barren ground increases in spite of continual efforts to install artificial reefs. This study approached the urchin barrens issue in South Korea, by focusing on a correlational analysis of urchin and macroalgal abundance. Urchin density and algal species coverage were obtained using a quadrat image analysis. Subtidal sites were then classified into three groups according to the average densities of urchins to evaluate the characterization of the macroalgal community: no urchin (NU) zone; transition (TR) zone, $4inds.\;m^{-2};$ and urchin (UR) zone, ${\geq}8inds.\;m^{-2}$. The average urchin density in the study site was $4.7inds.\;m^{-2}$ and 57 macroalgal species were found in the study site. From the NU zone to UR zone, total species number, species diversity index and evenness gradually decreased, whereas the dominance index increased. The algae species with negative correlations were Grateloupia divaricata, Polysiphonia morrowii, Chondracanthus intermedius, Delesseria violacea, Desmarestia viridis; and those with positive correlations were the crustose corallines, Sargassum horneri. Other species were not significantly correlated with urchin density. The significant correlations indicate that the abundance of some macroalgal species is proportionally regulated by sea urchin density. This study also shows how macroalgal vegetation changes in response to an urchin's density gradient in a natural condition; and there is a TR zone that existed with respect to an intermediate level of algal abundance.