• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.s02
• /
• pp.13-33
• /
• 1989

Agroclimate should be analyzed and evaluated accurately to make better use of available chimatic resources for the establishment of optimum cropping systems. Introducing of appropriate cultivars and their cultivation techniques into classified agroclimatic zone could contribute to the stability and costs of crop production. To classify the agroclimatic zones, such climatic factors as temperature, precipitation, sunshine, humidity and wind were considered as major influencing factors on the crop growth and yield. For the classification of rice agroclimatic zones, precipitation and drought index during transplanting time, the first occurrence of effective growth temperature (above 15$^{\circ}C$) and its duration, the probability of low temperature occurrence, variation in temperature and sunshine hours, and climatic productivity index were used in the analysis. The agroclimatic zones for rice crop were classified into 19 zones as follows; (1) Taebaek Alpine Zone, (2) Taebaek Semi-Alpine Zone, (3) Sobaek Mountainous Zone, (4) Noryeong Sobaek Mountainous Zone, (5) Yeongnam Inland Mountainous Zone, (6) Northern Central Inland Zone, (7) Central Inland Zone, (8) Western Soebaek Inland Zone, (9) Noryeong Eastern and Western Inland Zone, (10) Honam Inland Zone, (ll) Yeongnam Basin Zone, (12) Yeongnam Inland Zone, (13) Western Central Plain Zone, (14) Southern Charyeong Plain Zone, (15) South Western Coastal Zone, (16) Southern Coastal Zone, (17) Northern Eastern Coastal Zone, (18) Central Eastern Coastal Zone, and (19) South Eastern Coastal Zone. The classification of agroclimatic zones for cropping systems was based on the rice agroclimatic zones considering zonal climatic factors for both summer and winter crops and traditional cropping systems. The agroclimatic zones were identified for cropping systems as follows: (I) Alpine Zone, (II) Mountainous Zone, (III) Central Northern Inland Zone, (IV) Central Northern West Coastal Zone, (V) Cental Southern West Coastal Zone, (VI) Gyeongbuk Inland Zone, (VII) Southern Inland Zone, (VIII) Southern Coastal Zone, and (IX) Eastern Coastal Zone. The agroclimatic zonal characteristics of climatic disasters under rice cultivation were identified: as frequent drought zones of (11) Yeongnam Basin Zone, (17) North Eastern Coastal Zone with the frequency of low temperature occurrence below 13$^{\circ}C$ at root setting stage above 9.1％, and (2) Taebaek Semi-Alpine Zone with cold injury during reproductive stages, as the thphoon and intensive precipitation zones of (10) Hanam Inland Zone, (15) Southern West Coastal Zone, (16) Southern Coastal Zone with more than 4 times of damage in a year and with typhoon path and heavy precipitation intensity concerned. Especially the three east coastal zones, (17), (18), and (19), were subjected to wind and flood damages 2 to 3 times a year as well as subjected to drought and cold temperature injury.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.12
• /
• pp.953-959
• /
• 2013

In this study, through the analysis of the growth condition and prey of the largemouth bass, we tried to understand the characteristics of the aquatic animal community depending on the composition and shape of a artificial lake. The evaluation was conducted for Ilsan lake which is one of the largest urban artificial lakes in Korea. Weight gain rate of the Zone III (eco-zone) was more rapid based on the relationship of length and weight of largemouth bass. Total 16 and 9 species of fish were found in each Zone III and Zone I, II (artificial zones), which represented significantly higher diversity of fish species in Zone III than Zone I, II. Index of relative importance(IRI) was more diverse at Zone III and when considering the hunger rate the food stress was more serious at Zone I, II. the proportion of the population of fish, Zacco platypus revealed to be the dominant species, and Squalidus gracilis majimae and Rhinogobius brunneus inhabited only Zone III naturally rich. On account of low prey species diversity of Zone I, II, the Phylum Arthropoda like Heteroptera showed relatively higher prey ratio in stomach of largemouth bass than that of Zone III. It was possible to figure out aquatic animal community characteristics indirectly through analyzing the stomach contents of largemouth bass.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.6
• /
• pp.519-525
• /
• 2008

For this study, SM45C steel rods using generally for power transmission shafts and machine components was selected and welded by butt-GMAW method. And then it was studied about estimation of fatigue strength and the region of infinite life by Haigh diagram using Goodman's equation. Fatigue strength in weld zone presents highly in order of the boundary between deposited metal zone and heat affected zone, deposited metal zone, heat affected zone. This result agrees with distribution of hardness in weld zone. Fatigue strength in base metal zone presents highly compared with weld zone in low cycles between $10^4$ cycles and $10^6$cycles, but it presents the lowest fatigue strength on the order of heat affected zone in the vicinity of $10^6$cycles. It is the result that the first high compressive residual stress distributed by drawing process of the steel rods is released and the base metal is softened by alternating stresses. The region of infinite life by Haigh diagram presents highly in order of the boundary between deposited metal zone and heat affected zone, deposited metal zone, heat affected zone. From this results, it is demanded that the stress for safety design of machine components using SM45C butt-welded steel rods must be selected in the region of the lowest infinite life of heat affected zone.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.21 no.1
• /
• pp.125-137
• /
• 1993

Ansan urban nature park is 197.8ha and located in Seodeamun-Gu of Seoul. Flora of Ansan consisted of 141 species, 76 genera, 40 families in woody plants. This study was conducted to analyze the natural environment and establish the park management plan with ecological approach. The result of this study is summarized as follows. 1. The short term plan shall be performed in six vegetation management zones; Robinia pseudoacacia community zone, Sorbus alnifolia community zone, Quercus acutissima community zone, Populus ${\times}$albagrandulosa community zone, Pinus densiflora community zone, and landscape planting zone. Pinus densiflora and landscape planting zones shall be managed artificially, the others managed with ecological approach. 2. The long term plan shall be performed in four vegetation management zones; Robinia pseudoacacia community zone, Quercus spp. community zone, Pinus densiflora community zone, and landscape planting zone. Pinus densiflora and landscape planting zones shall be managed artificially, the others managed with ecological approach. 3. Because soil of Ansan is acidified and the soil disturbed growth of plants, the improvement of soil is necessary. The fertilization shall be performed in three zones; evergreen confierous tree zone(ex. P. densiflora), Quercus spp. zone, and the other deciduous tree zone(ex. R. pseudoacacia).

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.6
• /
• pp.857-865
• /
• 2006

The submerged barrier, employed in a reactor, divided a reactor into sludge settling zone and mixing zone according to flow type. In spite of mixing in the mixing zone, the lower part of sludge settling zone than the top of barrier was in a steady flow due to the barrier, which prevented the turbulent flow, produced from the mixing zone, from being diffused into the sludge settling zone. Therefore, the sludges in the mixing zone flowed backward over the barrier into the upper part of the sludge settling zone by turbulent flow and settled down in the sludge settling zone by the force of gravity. When barrier/water level ratio was 0.5, most sludges almost did not settle down in tile sludge settling zone because the sludges were directly affected by the turbulent flow, generated from mixer in the mixing zone. At 0.63 of barrier/water level ratio, sludge in the middle part of sludge settling zone rocked from side to side weakly. And sludge in the lower part became piled up on the bottom over this ratio. After 10minutes of sludge settling, the lower part of sludge settling zone was over 5000mg/L of sludge concentration although intial sludge concentration was 2300mg/L. By using the submerged barrier and the flow types, it could transfer sludge from this to that.

• The Korean Journal of Malacology
• /
• v.28 no.1
• /
• pp.29-35
• /
• 2012

Growth patterns of the Manila clam, Ruditapes philippinarum in each tidal level were studied in the intertidal zone in Tae-an on the west coast of South Korea from April to August 2009. Environmental factors and the specimens of R. philippinarum were monthly collected at three intertidal locations: low intertidal zone, low-middle intertidal zone and middle intertidal zone. Temperature of sediment in low intertidal zone were lower than those in other intertidal locations. Concentrations of Chl-${\alpha}$ were not significantly different between in each tidal level. Exposure hours in low intertidal zone were shorter than those in other intertidal locations. Density of each year class in low intertidal zone were higher than those in low-middle intertidal zone and middle intertidal zone. Growth factors of R. philippinarum in low intertidal zone were better than those in other intertidal locations. The growth rate of under one year class individuals of low intertidal zone were higher than those in low-middle intertidal zone and middle intertidal zone, before the main recruitment period of R. pilippinarum. Although the growth patterns of R. philippinarum may be affected by various environmental factors, we suggests that the exposure duration is the main affect in the growth patterns of R. philippinarum in intertidal zone.

• 한국연소학회:학술대회논문집
• /
• 2006.04a
• /
• pp.39-45
• /
• 2006

Analysis of the internal state of the blast furnace is needed to predict and control the operating condition. Especially, it is important to develop modeling of blast furnace for predicting cohesive zone because shape of cohesive zone influences overall operating condition of blast furnace such as gas flow, chemical reactions and temperature. because many previous blast furnace models assumed cohesive zone to be fixed, they can't evaluate change of cohesive zone shape by operation condition such as PCR, blast condition, and production rate. In this study, an axi-symmetric 2-dimensional steady state model is proposed to simulate blast furnace process. In this model, cohesive zone is changed by solid temperature range, FVM is used for numerical simulation. To find location of cohesive zone whole calculation procedure is iterated Until cohesive zone is converged. Through this approach, shape of cohesive zone, velocity, composition and temperature within the furnace are predicted by model.

• Economic and Environmental Geology
• /
• v.26 no.4
• /
• pp.473-487
• /
• 1993

The Janggun mine area is occupied by the Proterzoic and the Paleozoic meta-pelites, which are intruded by the Jurassic Chunyang granite. The metamorphic terrain is divided into four zones of progressive metamorphism on the basis of mineral assemblages. The zones are chlorite zone, staurolite zone, andalusite zone, sillimanite zone ascending order. Boundary lines between the zones resemble outline of the Chunyang granite mass. Isograd reactions are chlorite+chloritoid+muscovite=staurolite+biotite+quartz+water, staurolite+chlorite+muscovite+quartz=andalusite+biotite+water, and staurolite+muscovite+quartz=andalusite+biotite+garnet+water between the chlorite zone and the staurolite zone, the staurolite zone and the andalusite zone, and the andalusite zone and the sillimanite zone, repectively. They are univariant reactions in KFMASH component system. Metamorphic conditions estimated from garnet-biotite geothermometers and phase equlibria are $530^{\circ}C$ and lower than 4 kb.

• Journal of Welding and Joining
• /
• v.26 no.3
• /
• pp.45-50
• /
• 2008

SM45C steel rods being used generally for power transmission shafts and machine components was selected and welded by Butt-GMAW(Gas Metal Arc Welding) method. An estimation of fatigue life was studied by constructing S-N curve. Fatigue strength of base metal zone showed higher values than one of weld zone in low cycles between $10^4$ and $10^6$cycles. However, significant decrease in fatigue strength of base metal was found around $10^6$cycles, which were almost same as one of heat affected zone. This decrease was attributed that initial residual stress of the steel rods distributed by drawing process was diminished by continually applied load, and resulted in softening of base metal. The fatigue limit of the weld zone was highest in the boundary between deposited metal zone and heat affected zone, and followed by in the order of deposited metal zone, base metal zone, and heat affected zone. Based on these results, it is revealed that the stress for safety design of machine components using SM45C butt-welded steel rods must be selected within the region of the lowest fatigue limit of heat affected zone.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.1
• /
• pp.26-32
• /
• 2010

SM45C steel rods using generally for machine components were selected and welded by butt-GMA welding method for this study. And then they were studied about characteristics of fatigue behavior and fracture surfaces by rotary bending test. Fatigue strength in weld zone present highly in order of the boundary between deposited metal zone and heat affected zone, deposited metal zone, heat affected zone. The region of infinite life by Haigh diagram present highly in order of the boundary between deposited metal zone and heat affected zone, deposited metal zone, heat affected zone. Fatigue cracks in unnotched specimens of base metal and weld zone introduce simultaneously from extensive out-side of circumferential cross-section and propagate to the other side indicating beach markings and dimples according to consolidation of fatigue cracks. Fatigue cracks in all of notched specimens introduce simultaneously in out-side of circumferential cross-section by high stresses and propagate to center of it indicating beach markings.