References
- Juvinall, R. C., 1983, Engineering Considerations of Stress, Strain, and Strength, McGraw-Hill, New York.
- Collins, J. A, 1981, Failure of Materials in Mechanical Design, Wiley-Interscience, New York.
- Lee, Y. B., Chung, C. S., Park, Y. K, and Kim, H. K., 1998, "Effects of Redistributing Residual Stresses on the Fatigue Behavior of SS330 Weldments," lnt. J. Fatigue, Vol. 20, No. 8, pp. 565-573. https://doi.org/10.1016/S0142-1123(98)00024-3
- Lee, Y. B. and Oh, B. D., 2005, "Characteristics of Fatigue Crack Propagations with respect to the Angles between Rolling and Tensile Loading Directions of Steel Plates," J. of KSMTE, Vol. 14, No. 3, pp. 74-80.
- Lee, Y. B. and Oh, B. D., 2003, "Fatigue Characteristics of Load-Carring-Crucifoml Fillet Welded Joints according to Welding Methods," J. of KSMIE, Vol. 12, No. 1, pp. 38-44.
- Lee, Y. B., Siljander, A., and Lawrence Jr., F. V., 1992, "The Role of Casting Porosity in Fatigue Properties of AL-Si 319 Lost Foam Cast Alloy," KSME Journal, Vol. 6, No. 2, pp. 81-87. https://doi.org/10.1007/BF02953074
- Peterson, R. E., 1974, Stress Concentration Factor, John Wiley & Sons, Inc, USA
- Pilkey, W. D., 1997, Peterson's Stress Concentration Factors, John Wiley & Sons, Inc, USA
- Kuguel, R, 1961, "A Relation between Theoretical Stress Concentration Factor and Fatigue Notch Factor Deduced from the Concept of Highly Stressed Volume," ASTM, Proc., Vol. 61, pp. 732-748.
- Toper, T. H., Wetzel, R. M., and Morrowm, J. D., 1969, "Neuber's Rule Applied to Fatigue of Notched Specimens," J. of Material, Vol. 4, No. 1, pp. 200-209.
- Bannantine, J., Comer, J., and Handrock, J., 1987, Fundamentals of Metal Fatigue Analysis, University of Illinois, USA, pp. 6-28.
- Shigley, J. E. and Mischike, C. R., 1989, Mechanical Engineering Design, 5th ed., McGraw-Hill, Singapore, pp. 296-300.
- Lee, Y. B., 1978, "An Experimental Study of the Stress Intensity Factor at the weld zone," Master Degree Thesis, Inha University, Republic of Korea, p. 50.
- Ewalds, H. L. and Wanhill, R. J., 1986, Mechanisms of Fracture in Actual Materials, Fracture Mechanics, Edward Amold, Delft; London; Baltimore; Victoria, pp. 226-256.
- Boyer, H. E., 1974, Photography of Fractured Parts and Fracture Surfaces, Metal Handbook, 8th ed., USA, pp. 11-48.