• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표회 논문집(I)
• /
• pp.139-144
• /
• 1998

This study is intended to devolop the self waterproof agents for high performance concrete by analyzing the properties of fresh and hardened mortar with various addition ratios of the inorganic admixture and zinc stearate. As the results of the test, the flow and air content increase with the addition of expansive additives. When the replacement rate of silica fume increases, the flow decreases for the increased viscidity. And the flow and sir content decrease with the addition of zinc stearate. At hardened state, the compressive strength, tensile strength and flexual strength decrease with the addition of expansive additives and zinc stearate. With the increase of silica fume's replacement, they show a little decrease at early age and then increase gradually. Also, absorption and permeability show a steep decrease when zinc stearate is added, and a slack decrease with the replacement of silica fume.

• 공업화학
• /
• 제10권8호
• /
• pp.1216-1220
• /
• 1999

괴상 중합과 현탁 중합 및 수산화나트륨을 이용한 중화를 통하여 제조된 poly(styrene-co-sodium methacrylate) 이오노머의 가소제로 스테아린산 아연을 첨가하여 열적 성질과 유변학적 성질에 미치는 영향을 조사하였다. 이오노머 중 스테아린산 아연은 이온기 함량에 따라 부분적으로 결정화가 억제됨이 관찰되었다. 이오노머 중 이온기들은 스테아린산 아연을 용해시키고 결정화를 억제하는 것으로 판단되었으며, 이온기 1몰이 0.4~0.6몰의 스테아린산 아연을 용해시키는 것으로 추정할 수 있었다. 용해된 형태의 스테아린산 아연만을 포함한 이오노머는 Cox-Merz 플롯에서 전형적인 균일계의 유변학적 거동을 보였다. 그러나 용해된 스테아린산 아연뿐 아니라 결정성 스테아린산 아연을 포함한 이오노머들은 Cox-Merz 플롯에서 불균일계의유변학적 거동을 보였다.

• Elastomers and Composites
• /
• 제54권3호
• /
• pp.241-246
• /
• 2019

Carbon master batch (CMB) rubber sheets, which are stored in stacks, are difficult to separate during reuse because of the adhesion between sheets caused by the stacked weight over time. To solve this problem, in the actual rubber product manufacturing process, various anti-tacking agents (solid powder or liquid surfactants) are applied to the sheet surface. In this study, the emulsion samples of zinc (Zn)-stearate/triethanolamine (TEA)-stearate mixtures were prepared using TEA-stearate as a surfactant, prepared using an industrially manufactured Zn-stearate powder, and their basic anti-tacking properties were studied. During the process of manufacturing emulsion, a heat treatment process and an auxiliary surfactant were introduced to improve the dispersion stability. Results showed that the heat-treated sample exhibited a significant improvement in terms of sedimentation, storage stability, and anti-tacking characteristics since the Zn-stearate particles were reduced to a smaller size by the heat-treatment than that of the original Zn-stearate powder.

• 한국재료학회지
• /
• 제5권4호
• /
• pp.426-432
• /
• 1995

윤활제인 zinc stearate의 첨가량 (0~4wt%)을 변화시켜 U$O_{2}$분말의 겉보기밀도, 성형시의 분말입자간 마찰과 입자/다이벽 마찰간의 상관관계를 조사하였다. 소량의 윤활제 첨가시에는 U$O_{2}$분말입자간 박막의 윤활제 도포층이 형성되어 겉보기밀도가 증가한 반면 다량의 윤활제를 첨가한 경우에는 U$O_{2}$ 분말입자에 두꺼운 윤활제 도포층이 형성되고 미혼합된 윤활제가 존재하여 겉보기밀도는 감소하는 경향을 보였다. 윤활제를 첨가혼합한 상태에서 다이벽 윤활도포 유무에 따라 구한 U$O_{2}$ 성형체의 성형압력/성형밀도 자료로부터 분말입자간 마찰, 입자/다이벽 마찰 그리고 성형시 lubrication/inhibition등의 상대적 중요성을 조사하였다. 입자/다이벽 마찰에 의한 압력손실은 입자간 마찰에 의한 압력손실보다 크게 나타났다. 입자/다이벽 마찰에 의한 압력손실은 다이벽 윤활제 도포에 의해 최소화될 수 있지만 상대적으로 바람직하지 않은 성형시의 inhibition이 야기되는 것으로 나타났다.

• Nuclear Engineering and Technology
• /
• 제34권4호
• /
• pp.323-330
• /
• 2002

Various types of compounds were tested with the aspects of decomposition and formation of residue in a $CO_2$ or 7H$_2$+93$N_2$ atmosphere. The evaporation temperature range of each compound was determined from thermogravimetric curve. Decomposition of dicarbon amide, stearic acid, acrowax and zinc stearate was studied by thermogravimetry in $CO_2$ or in 7H$_2$+93$N_2$ atmosphere. All compounds were decomposed in $CO_2$ atmosphere at lower than 40$0^{\circ}C$, but the residue, ZnO remained for zinc stearate. ZnO did not decompose in $CO_2$ atmosphere up to 130$0^{\circ}C$, but reduced into Zn metal and disappeared in the temperature range of $600^{\circ}C$ to 120$0^{\circ}C$ in 7H$_2$+93$N_2$ atmosphere. The effect of residue, which trapped in closed pores of sintered pellet, on the thermal stability was studied using the resintering test at 1$700^{\circ}C$ in 7H$_2$+93$N_2$ atmosphere. In the case of oxidative sintered pellet with admixing zinc stearate, the cavity formation accompanied with a density drop after resintering is due to the pressure of the Zn gases trapped in the isolated pores.

• 한국안전학회지
• /
• 제31권4호
• /
• pp.82-89
• /
• 2016

In this paper, various of experiments were performed for checking the usefulness of Pozzolan Inorganic Polymer(PIP) Waterproof Admixture. The results of the experiment enabled to set the optimum mixture ratio of PIP waterproof admixture as 3.5%. Then, the test specimen mixed with PIP waterproof admixture was produced and consider whether meeting the quality standard of waterproofing admixture for concrete (KS F 4926) From the results, all the items such as mechanical properties and durability were meet the quality standard of KS. The PIP waterproof admixture concrete shows the high resistance of absorption, permeability and chloride ion penetration thanks to its internal components such as siliceous powder, zinc stearate and dispersive polymer.

• 자동차안전학회지
• /
• 제13권2호
• /
• pp.30-34
• /
• 2021

Electrical failures and reliability problems of electronic components by ionic migration between adjacent device terminals have become an issue in automotive electronics. Especially unlike galvanic corrosion, ionic migration is occurred at high temperature and high humidity under applied electric field condition. Until now, although extensive studies of the ionic migrations dealing with PCBs, electrodes, and solders were reported, there is no study on the effect of insulation polymers and metallic fillers for ionic migration. In this research, therefore, ionic migration induced by the types and contents of polymers and metallic fillers, and variety conditions of temperature, humidity, and applied voltage was studied in detail. Ester and amide types of liquid crystal polymer (LCP) and poly (phthalamide) (PPA) were used as base polymers, respectively and compounded with the metallic fillers of Copper iodide (CuI), Zinc stearate (Zn-st), or Calcium stearate (Ca-st) in various compositions. The compounding polymers were fabricated in IPC-B-24 of SIR test coupon according to ISO 9455-17 with Cu electrodes for ionic migration test. While there is no change in LCP-based samples, ionic migration in PPA compounding sample with a high water absorption property was accelerated in the presence of 0.25 wt% or above of CuI at the environmental conditions of 85℃, 85% RH and 48V. The dendritic short-circuit growth of Cu caused by ionic migration between the electrodes on the surface of compounded polymers was systematically observed and analyzed by using optical microscopy and SEM (EDX).

• Journal of Pharmaceutical Investigation
• /
• 제12권1호
• /
• pp.1-11
• /
• 1982

Silver sulfadiazine has been introduced to replace silver nitrate in the topical treatment of extensive burns and this drug exerts a prominent antibacterial action against Pseudomonas aeruginosa. The compound is painless upon application and insufficient sulfadiazine is absorbed to cause crystalluria. The primary purpose of the study was to clarify the antimicrobial action of zinc sulfadiazine ointment in comparison with silver sulfadiazine ointment as well as the pharmaceutical properties of the zinc sulfadiazine preparations. The results are summerized as followings: 1) The optimum ratio of two substrate compounds for the synthesis of zinc sulfadiazine are 2 moles of sulfadiazine and 1 mole of zinc sulfate at pH 6.0. 2) The stability of zinc sulfadiazine ointment preparation by using polyethylene glycol base, Beeler's base or polyoxyl 40 stearate base was more stable than that of silver sulfadiazine preparations. 3) The antimicrobial action of zinc sulfadiazine exhibits a stronger antimicrobial activity than that of sulfadiazine against Staphylococcus aureus but the opposite is true against Pseudomonas aeruginosa.

• Macromolecular Research
• /
• 제16권2호
• /
• pp.178-181
• /
• 2008

Polystyrene (PS) nanospheres with a monodisperse size distribution, positive surface charge and high molecular weight were successfully synthesized using various types of metal stearates in an aqueous NaOH medium. The diameter of the PS nanospheres was controlled from 80 to 450 nm by changing the type of metal stearate. It was also found that controlling the NaOH concentration in solution was important for producing monodisperse PS nanoparticles. The nanospheres prepared with zinc stearate possessed a positive surface charge of 60 to 80 mV, confirming that PS particles were functionalized with metal stearates. It is believed that the metal stearates provide PS particles with not only colloidal stability but also a positive surface charge.

• 콘크리트학회논문집
• /
• 제13권6호
• /
• pp.527-535
• /
• 2001

SF, ZS 및 SS의 혼합비율을 변화시켜 제조한 구체방수재를 대상으로, 방수재의 종류 및 첨가량에 따른 굳지 않은 콘크리트 및 경화콘크리트의 수밀특성을 분석한 결과는 다음과 같다. 구체방수재의 첨가량이 증가할수록 유동성은 증가하였으며, 응결시간은 지연되었다. 경화상태 압축강도는 기존 제품인 A의 경우, 방수재 첨가량 183kg/㎥까지는 증가하나, 그 이후 24kg/㎥에서는 감소하는 것으로 나타났으며, 시제작품인 B, C, D의 경우는 기존 구체방수재인 A에 비해 높은 강도특성이 있는 것으로 나타났다. 또한, 흡수량은 구체방수재 혼입량이 증가하고, 재령이 경과할수록 적어지는 것으로 나타났는데 특히, ZS의 첨가량이 많은 방수재 일수록 크게 낮아지는 것으로 나타났다. 투수량은 흡수량과 유사한 경향으로, 방수재 첨가량이 증가하고, 재령이 경과할수록 감소하는 등의 특성을 나타내고 있었다. 이상을 종합하여 볼 때 시제작품으로 가정한 SF : ZS : SS의 혼합비가 1 : 2 : 1이고, 혼입량이 63kg/㎥인 조건이면 기존 구체방수재보다 우수한 품질의 수밀콘크리트를 제조할 수 있는 것으로 판단되었다.