• Journal of Nutrition and Health
• /
• v.28 no.7
• /
• pp.620-628
• /
• 1995

This study investigated micro-mineral content in human milk along with nutritional intake of lactating women. Milk samples were collected from 33 healthy lactating women and mineral levels were analyzed. Copper, zinc, manganese and selenium were analyzed. The factors that affect the mineral levels in human milk were also investigated longitudinally from 2-5 days to 12 weeks postpartum. Concentrations of manganese and selenium didn't differ significantly within the lactation period. the levels of copper and zinc declined linearly over the first 12 weeks of lactation. Statistically significant quadratic trends were observed in zinc concentrations. There was no significant correlation between maternal age and mineral concentrations throughout the lactation period. In addition, no significant differences were found between the primipara and the multipara for mineral concentrations in human milk.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.10
• /
• pp.896-901
• /
• 2005

The microstructure and electrical properties of praseodymium-based zinc oxide varistors were investigated at various cobalt oxide contents in the range of $0.5{\~}5.0 mol\%$. The ceramic density increased in the range of $5.25{\~}5.55 g/cm^3$ with increasing cobalt oxide content. The varistor doped with cobalt oxide of $1.0 mol\%$ exhibited the highest nonlinearity, with 66.6 in nonlinear exponent and 1.2 $\mu$A in leakage current. The donor concentration, density of interface states, and tamer height were in the range of $(1.06{\~}1.69){\times}10^{18}/cm^3$, $(3.11 {\~}3.56){\times}10^{12}/cm^2$, and 0.80${\~}$1.07 eV, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.346.2-346.2
• /
• 2014

To use the GaN based light-emitting diodes (LEDs) as solid state lighting sources, the improvement of light extraction and internal quantum efficiency is essential factors for high brightness LEDs. In this study, we suggested the new materials system of a zinc tin oxide (ZTO) layer formed on blue LED epi-structures to improve the light extraction. ZTO is a representative n-type oxide material consisted of ZnO and SnO system. Moreover, ZTO is one of the promising oxide semiconductor material. Even though ZTO has higher chemical stability than IGZO owing to its SnO2 content this has high mobility and high reliability. After formation of ZTO layer on p-GaN layer by using the spin coating method, structural and optical properties are investigated. The x-ray diffraction (XRD) measurement results show the successful formation of ZTO. The photoluminescence (PL) and absorption spectrum shows that it has 3.6-4.1eV band gap. Finally, the light extraction properties of ZTO/LED chip using electroluminescence (EL) measurement were investigated. The experimental and theoretical analyses were simultaneously conducted.

• Journal of the Korean institute of surface engineering
• /
• v.21 no.4
• /
• pp.168-175
• /
• 1988

The nickel0zinc allot depositions have been studjen in ammonium chloridw added chloride baths to fine out the effects of ultrasonic irradiation for the electrodeposition processes. The compositions of deposited alloys, the current efficiencies, corrosion resistance and brightness in various conditions of electrodeposition were investigated, in the range of ultrasonic irradiation of 50,500 and 1,000kc/s respectively. The results obtained are as follows; 1. the ratio of nikel to zinc in the deposit increased according 시 the ammonium chloride concentration in irradiated baths. 2. The current efficiencies became also higer in the irradiated bath. 3. Ammonium ions in solution seem to retard formation of zinc hydroxide. 4. The corrsion resistance and brightness of the deposits are dependent upon nickel content of deposits which ranges 10-18%(wt)nickel in the irradiated baths and 11-15%(wt)in ninirradisted baths. 5. The corrosion resistance and brightnes of the deposited are appreciably better in the irradiated baths than in non-irradiated bath with the mole ratio of 3.4(NH+4/Ni+++Zn++).

• Journal of the Korean Ceramic Society
• /
• v.43 no.11 s.294
• /
• pp.703-709
• /
• 2006

We report on the synthesis of highly uniform, single phase zinc and cobalt thin films prepared by the Liquid Phase Deposition (LPD) method. X-Ray diffraction, TGA and EDX measurements support the assumption that the as deposited films are constituted by a mixture of crystallized FeOOH and amorphous M(OH)$_2$ (M=Co, Zn) which is converted upon heat treatment in air at 600?C into the corresponding zinc ferrites. The films with adjustable chemical compositions are identified with a crystal structure as spinel-type and present a spherical or rod-like microstructure, depending on the both the nature and concentration of the divalent transition metal ions. Zinc ferrite thin films present a superparamagnetic behavior above blocking temperatures which decrease with increasing the Zn content and are ferromagnetic at 5 K with coercivities ranging between 797.8 and 948.5 Oe, whereas the cobalt ferrite films are ferromagnetic at room temperature with magnetic characteristics strongly dependent on the chemical composition.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.4
• /
• pp.303-312
• /
• 2001

Composition and microstructure of the tin-zinc alloys electroplated in gluconate bath were studied according to pulse current parameters. The cathode current efficiency increased with both the mean current density and the off-time decrease. Zinc content of the alloy deposits increased with increasing mean current density, while it decreased noticebly with increasing the off-time from 10-30ms to 100-150ms. The preferred orientation of the alloy deposits changed with the increase of peak current density in the sequence of (220)longrightarrow(220)+(420) or (220)+(420)+(321) mixed structure. The equiaxed grain size of the alloy increased with the increase of off-time and the decrease of mean current density.

• Current Research on Agriculture and Life Sciences
• /
• v.7
• /
• pp.221-230
• /
• 1989

Present experiment was designed to investigate the effect of long-term ethanol drinking on the mineral contents on hair, liver, kidney and muscle tissues. Forty-five rats were divided into 2 experimental groups and a control group. The control group received tap water and the other 2 groups 4% and 25% ethanol respectively as drinking source for 28 days. All rats were dissected on the 29th day. Hair, liver, kidney and muscle samples were taken and analyzed for zinc, calcium, copper and magnesium contents by atomic absorption spectrophotometeric method. The results obtained are summrized as follows : 1) The zinc content of muscle in 25% ethanol group showed significant (P<0.01) decrease whereas that of hair in 4% ethanol group showed significant (p<0.1) increase. 2) The calcium content of hair in 4% ethanol group showed significant (p<0.1) increase whereas; that of hair, kidney and muscle in both group showed no significant difference. 3) The copper and magnesium contents of muscle showed significant (p<0.1, p<0.05) decrease in both groups. From these results it may be concluded that the long-term drinking of ethanol affects the mineral content of body tissue.

• Journal of the Korean institute of surface engineering
• /
• v.43 no.4
• /
• pp.194-198
• /
• 2010

Indium doped zinc oxide films (ZIO) were deposited on non-alkali glass substrates by radio frequency (RF) magnetron sputtering at room temperature. The structural, electrical and optical properties of the ZIO films were investigated as a function of their $In_2O_3$ content (3.33-15.22 wt%). The ZIO films deposited with an $In_2O_3$ content of 9.54 wt% showed a relatively low resistivity of $9.13{\times}10^{-4}{\Omega}cm$ and a highly c-axis preferred orientation. The grain size and FWHM were mainly affected by the $In_2O_3$ content. The crystallinity and resistivity were enhanced with increasing grain size. The average transmittance of the ZIO films was over 85% in the visible region and their band gap varied from 3.22 to 3.66 eV depending on their doping ratio.

• The Korean Journal of Ceramics
• /
• v.3 no.2
• /
• pp.139-143
• /
• 1997

The photoluminescence characteristics of the zinc gallate have been investigated as a function of the composition and the firing atmosphere. Two distinct emission bands were observed whose peaks are 360 nm and 430 nm respectively. These emission bands are considered to be from two different emission centers. For $ZnO/Ga_2O_3$=49.3/50.7 or higher, 430 nm band is predominant and for $ZnO/Ga_2O_3$=49.2/50.8 or lower, 360nm band becomes predominant, whereas 430 nm band is almost completely suppressed. The shift of emission peak is though to be due to the change of the cation distribution with the zinc content in the spinel zinc gallate. Also, the emission centers responsible for the 360nm band are considered to be more efficient energy absorbers than the ones for the 430 nm band. Highly efficient green emitting phosphor was obtained by activating Zn-deficient zinc gallate with manganeses.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.398-403
• /
• 2001

There is a potential usability of electric arc furnace(EAF) dust produced during the iron manufacturing process as a recycled resource, because valuable materials such as Zn, Pb and Fe are contained in it. In this study, metallic Zn was recycled from the fine electric arc furnace dust by a solid state reduction method using carbon at relatively low temperature. It was possible to recover metallic zinc by using of high vapour pressure of zinc with this reduction method. The feasibility of recycled zinc for cold bonded pellet(CBP) was investigated. The main composition of EAF dust were franklinite(ZnFe$_2$O$_4$), magnetite(Fe$_3$O$_4$) and zincite(ZnO), and Pb and Cl were completely removed by a heat treatment in oxidation environment. The reduction ratio increased as the solid carbon content increased, and it increased with decreasing of dust particle size and increasing of compaction pressure due to a increase of contact area.