• The Journal of the Korea Contents Association
• /
• v.11 no.12
• /
• pp.78-87
• /
• 2011

A variety of intelligent application using the sensor network system is being studied. In general, the sensor network consists of nodes which equipped with a variety of sensing module and is utilized to collect environment information. Recently, the demands of multimedia data are increasing due to the demands of more detailed environmental monitoring or high-quality data. In this paper, we overcome the limitations of low bandwidth in Zigbee-based sensor networks and propose a routing algorithm for real-time multimedia data transmission. In the previously proposed algorithm for multimedia data transmission occurs delay time of routing setup phase and has a low data transmission speed due to bandwidth limitations of Zigbee. In this paper, we propose the hybrid routing algorithm that consist of Zigbee and Bluetooth and solve the bandwidth problem of existing algorithm. We also propose the disjointed multipath setup algorithm based on competition that overcome delay time of routing setup phase in existing algorithm. To evaluate the superiority of the proposed algorithm, we compare it with the existing algorithm. Our experimental results show that the latency was reduced by approximately 78% and the communication speed is increased by approximately 6.9-fold.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.77-83
• /
• 2013

Nowadays, the limitation of Lighting control and management skills is the excessive cost of equipments, the operational difficulties and wasting energy. To solve this problem is in need of communication and management S/W that is worked out complexly well as a information system of smart lighting energy, which is loaded wireless network facility. This paper made a study od the energy saving technology through energy monitoring and we developed LEIS(Lighting Energy Information Sysem) to converge this one. LEIS is monitoring and control lighting energy data that is collelcted from sensors by Zigbee mesh network and shows lighting use information by visualization to users. It is consists of lighting energy information data base based on LEM(Lighting Energy Metering) information and LEIS Web application, provide function scenario to manage energy optimization through LEIS.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.965-972
• /
• 2011

As an aged population has increased in Korea, the number of patients with chronic disease has soared up as well. The rapid increase of the chronic disease triggers a need of new paradigm of healthcare. In terms of data transmission of healthcare system, a use of data-transmission protocol based on bluetooth could be dismal in application of healthcare due to its postponement of connection. On the contrary, WPAN is evaluated to be proper to support the application of healthcare in restricted geographic areas. In addition, the bluetooth, a base of the current wireless network, doesn't support a special mechanism to cope up with emergent patients because of its delayed connection among devices. Against this backdrop, this study aims to design an integrated interface of multi bio-sensing and suggest a measuring and monitering system for the patients with chronic illnesses by using Zigbee of WPAN as a sufficient bandwidth is anticipated owing to frequent deliveries of complicated biological signals.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.787-790
• /
• 2015

Recently, M2M (Machine to Machine) communication is possible the development of MTC (Machine Type Communication) devices becomes active. MCT devices in the form of home appliances have a low power consumption, low cost, short-range wireless communication in wireless home network. For purpose, MTC devices based on IEEE 802.15.4/Zigbee are composed in the form of cluster-tree topology, which consists of one PAN (Personal Area Network), one or other router and end of nodes. It happens that transmission delay, packet drop, and lacking data resulted from collision originated by a competition for allocating channels among MTC devices that greatly increased. At last performance of entire network can be degradated. This paper proposes that the beacon frame-based grouping algorithm using multiple channels in a MTC devices in the presence of wireless home network interference. The proposed algorithm decreases the transmission delay, dropped packet and throughput is more increase, so the proposal algorithm is more efficient than the IEEE 802.15.4/ Zigbee standard.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.2
• /
• pp.99-105
• /
• 2008

Entering the twenty-first century, the technology of wireless communication develops the applications with the ubiquitous concept. It is standardized and can be choose for various uses in different fields. With this trend and the advantages of wireless system, the research is conducted to use wireless system instead of wire system to existing equipment on aircraft. Wireless system is general on aircraft. However, wire system is used to communicate ground crew and pilot and to get data from equipment installed on aircraft. In this study, a wireless voice communication system was developed to communicate ground crew and pilot on aircraft as effective wireless system. Also, a wireless system to transmit and receive voltage and current data was developed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.8
• /
• pp.841-846
• /
• 2014

FBG sensors are mainly used to measure deformation of structures such as tunnels, bridges and ships. In this paper, an interrogator of FBG sensors is developed and implemented to measure the status of structures. A developed interrogator includes CAN wired and Zigbee wireless communication for remote monitoring. Strain of structure is measured using shift of wavelength of reflected light from FBG sensor. A digital signal controller is used to process signals of a FBG sensor and transmit data for remote monitoring. As a result of experiment, developed interrogator is effective to measure deformation of structures.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.85-91
• /
• 2014

Nowadays, Dynamic lighting control and management skills are studied and used. If the system which is to manage multiple intelligent spot applied ubiquitous service technology is built with decision making and used in the complex intelligent space like a apartment then will improve energy efficiency and provide comfortability in optimal conditions. To solve this problem distributed autonomous control middleware and energy management system which process data gathering by zigbee mesh network and search proper services to save energy by the existing state of things is necessary. In paper we designed DDLEMS (Distributed Dynamic Lighting Energy Management System) that is to service duplex communication embedded by software based home server platform to provide mobile services in the smart place and support decision making about energy saving to the best use of wireless censor node and controled network, energy display devices.

• Journal of Advanced Navigation Technology
• /
• v.11 no.3
• /
• pp.233-238
• /
• 2007

In this paper, a wireless sensor network system was embodied inside the shipping for digital ship. First, the analysis of radio environment inside ship are investigated. As a result, it was confirmed that a wireless sensor network system can be applied inside the ship. Using Shipboard Wireless Sensor Network System based on IEEE 802.15.4 technique, we designed, and made the prototype of Zigbee Node and RFID Reader. We could be sensing on shipboard and testing entrance of crew by using Zigbee Node and RFID Reader. The sensing and exit or entry control data are transmitted a server system through internet that connected Wireless Gateway with AP, so we can monitoring the saved data on shipboard database.

• The Journal of the Korea Contents Association
• /
• v.8 no.10
• /
• pp.45-53
• /
• 2008

The animatronics technique could be very important fact of technique not only to achieve full completion of visible image but also to offer lots of chances to express images by merging CG, special effects and special devices. In this thesis, we design and implement the Zigbee-based wireless transceiver and communication program to control animal animatronics such as a dog and bear. The wireless control utilizing the Zigbee protocol is that electrically consumption is more small than the Bluetooth and reliability of data transmission is better. The implemented control systems and program have the normal and replay function for control of animal models. This functions and operability are tested by a designed animatronics prototype under the wireless environment.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.41-43
• /
• 2005

PDA-based monitoring is used to acquire continuously the patient's vital signs, including electrocardiography, activity, heart rate and $SpO_2$. In this paper, A biomedical signal acquisition device was designed using 3-axial MEMS accelerometer and 1-ch ECG amplifier, to have the function of monitoring activity and electrocardiography. The proposed system is composed of transmitter and receiver. Through the Zigbee communication, subject's biosignals can be transmitted in real-time to receiver, and transmitted data confirmed using PDA. The packet size used in this device was set not to exceed a maximum payload size of 116 byte. One packet consists of two segments. The transmission speed was 21 packet per second, 420 ECG samples per second, and 42 acceleration samples per second. The proposed method can be used to develop Activities of Daily Living(ADL} monitoring devices for the elderly or movement impaired people and enables patients to be monitored without any constraints. Also, this method will reduce medical costs in the aged society.