• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.337-339
• /
• 1992

This paper deals with the tuning method of PID controls for process controls. It introduces the normalized process gain and the normalized process dead-time for processes based on Ziegler-Nichols tuning methods. In the case of PID auto-tuning, the first, this method applies Ziegler-Nichols tuning method and introduces the set-point weighting for reducing overshoot in the large normalized process gain or small normalized process dead-time, the second, this method is modified and includes the set-point weighting in the small normalized process gain or large normalized process dead-time. In the case of PI auto-tuning, this method is modified for reducing overshoot. This paper obtains empirical data with Ziegler-Nichols methods for refined Ziegler-Nichols tuning methods.

• 대한전기학회논문지
• /
• 제40권8호
• /
• pp.774-781
• /
• 1991

This paper proposes an auto-tuning method of a discrete -PIC controllers which is based on the Ziegler and Nichols's PID Tuning Rule. This tunign rule is derived using the Pade's first order approximation and it prevents the performance degradation caused by the time-delay effect of zero order holder when the Ziegler-Nichols tuning rule is applied to a discrete PID controller. A simple and practical auto-tuning method is proposed through combining this discrete tuning rule with the relay control. The auto-tuning scheme is implemented on a microprocessor based system and is applied to a position control system to show the effectiveness of the discrete tuning rule.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.775-777
• /
• 1998

The Ziegler-Nichols parameter tuning has been widely known as a fairly heuristic method to good determine setting of PID controllers, for a wide range of common industrial processes. We extract process knowledge required for rule base controller through tuning experiment and simulation study, such as set point weighting and normalised gain and dead time of process. In this paper, we presents a rule base PID controller by extracted process knowledge and the modified Ziegler-Nichols tuning. Computer simulation are provided demonstrate the feasibility of this approach.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 춘계학술대회 학술발표 논문집
• /
• pp.43-46
• /
• 1998

This paper presents a new parameter tuning method for PID controller. The Ziegler-Nichols Parameter tuning has been widely known as a fairly heuristic method to good determine setting of PID controllers, for a wide range of common industrial processes It has a excessive overshoot in the set point response, set point weighting can reduced the overshoot to specified values. It will also be shown that set point weighting is superior to the conventional solution of reducing large overshoot by other method. In this paper, we will modified the Ziegler-Nichols tuning formula by fuzzy set. These method will give appreciable improvement in the performance of PID controllers.

• 공학교육연구
• /
• 제20권4호
• /
• pp.61-66
• /
• 2017

Automatic flow control system composed by hardware and software was designed and fabricated to be used as teaching tool of feedback control theory in university experimental class. This system includes hardwares like data acquisition board, flow measuring device, transmitters, and the pneumatic valve, and software like LabView program for the monitoring and control of flow rates. The system was designed as the student can see the control effect of not only set point but also disturbance changes. Also the LabView program was composed for the calculation of controller parameters of both Ziegler-Nichols and Cohen-Coon tuning. The students can apply both tuning constants and compare the control performances. This system will provide the easy way for the students to understand the function and specification of control hardwares, and to raise the programing ability of control software.

• 한국소음진동공학회논문집
• /
• 제19권5호
• /
• pp.475-481
• /
• 2009

Real-coded genetic algorithm(RCGA) has better performances than conventional genetic algorithm about dealing with a large domain, the precision and the constrain problem. Also the RCGA has advantage of operation time because it doesn't have to following about decoding operation. In this paper the ranges of PID gains are limited based on Ziegler-Nichols method to consider a long operation time problem that is the main problem of genetic algorithm. Result shows proposed method represents better performance without ignored about result of ZN tuning method and reduces the calculation time.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.85.2-85
• /
• 2001

In this paper, we propose a modified Ziegler-Nichols PID controller using the fuzzy logic system. The proposed method is to parameterize a Ziegler-Nichols formula with a single parameter, and use the fuzzy logic system for automatic tuning of a single parameter of the modified Ziegler-Nichols formula. The fuzzy logic system has simple nine control rules. In order to verify the effectiveness of the proposed method, we simulated with the servo system. Simulation results demonstrate that better control performance can be achieved when compared with that of the Ziegler-Nichols PID controller.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.988-991
• /
• 2003

In this paper, we try to develop the controller which uses the block diagrams of SIMTool and internal functions CEMTool for planning the global driving controller for high efficiency AGV. We acquire the control efficiency by controlling the motor used each part of AGV driving controller. The block diagram structures provided with SIMTool is easily designed by the controller, and the monitoring and analysis of the results is researched by simulation. We expect to control AGV. robot and various plant using Ziegler-Nichols auto-tuning method and external I/O board

• 한국소음진동공학회논문집
• /
• 제19권11호
• /
• pp.1103-1109
• /
• 2009

In this paper, the control of a membrane used in reverse osmosis desalination plant by using immune algorithm(IA) is addressed. The proposed algorithm IA of auto tuning method can find optimal gains and compared with conventional Ziegler-Nichols tuning method. The results of computer simulation represent that the proposed IA shows a good control performances better than Ziegler-Nichols tuning method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.256-261
• /
• 2004

This paper presents a simple two-degree of freedom PID tuning table based on the CDM design method. The structure of the control system will be composed of plant, P or PI or PID controller and a pre-filter. The finalized formula can be used based on the experimental test of the plant in the same manner as the Ziegler-Nichols' second method. That is; users just need to find the critical gain and critical period experimentally and the parameters of the P, PI or PID controller with the pre-filter can be obtained by substituting the values of critical gain and critical period in the tuning table. The simulation results of the control systems utilizing the proposed controllers compared with those using the Ziegler-Nichols' second method will also be demonstrated.