• Journal of the Korean Mathematical Society
• /
• v.51 no.4
• /
• pp.721-734
• /
• 2014

Let M be a module over a commutative ring R, and let T(M) be its set of torsion elements. The total torsion element graph of M over R is the graph $T({\Gamma}(M))$ with vertices all elements of M, and two distinct vertices m and n are adjacent if and only if $m+n{\in}T(M)$. In this paper, we study the basic properties and possible structures of two (induced) subgraphs $Tor_0({\Gamma}(M))$ and $T_0({\Gamma}(M))$ of $T({\Gamma}(M))$, with vertices $T(M){\backslash}\{0\}$ and $M{\backslash}\{0\}$, respectively. The main purpose of this paper is to extend the definitions and some results given in [6] to a more general total torsion element graph case.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.219.2-219.2
• /
• 2014

Characteristics of Argon metastable density with electron density have been studied by using Laser induced fluorescence (LIF) in ICP. Two different evolutions of measured metastable densities with electron density depending on a measurement position are addressed. The experimental result is explained by using a zero dimensional global model and is due to electron kinetic properties in the positions that can be seen from electron energy probability functions measured by Langmuir probe. The underlying physics on metastable density with electron density and an experimental method of LIF are presented in detail.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.13-14
• /
• 2010

The active clamp forward converter provides zero voltage switching and low voltage stress in wide input voltage range. It has a high efficiency at a high switching frequency and the clamped energy is recovered to the input stage. It is available for the power adaptor circuit of notebook computer. The adaptor with 19.5V/200W output power is designed for notebook computer. Specially, it is considered the transformer properties of the converter in design process. The organized process is checked by the validity from the test of the active clamp forward converter.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.86-88
• /
• 1999

We investigated the current limiting characteristics of resistive and inductive SFCLs with $100{\Omega}$ of quench impedance for a line-to-line fault in the 154 kV transmission system. The fault simulation at the phase angles $0^{\circ}$, $45^{\circ}$, and $90^{\circ}$ showed that the resistive SFCL limited the fault current less than 15 kA without any DC component after one half cycle from the instant of the fault. On the other hand, the inductive SFCL suppressed the current below 13 kA, but with $2{\sim}3\;kA$ of DC component which decreased to zero in 6 cycles. We concluded that the inductive SFCL had higher performance in current limiting but the resistive SFCL was better from the view point of DC components.

• Journal of Biosystems Engineering
• /
• v.25 no.6
• /
• pp.511-516
• /
• 2000

The strength of the connecting joint of boxthorn(Lycium chinense Mill) fruits to tree twigs was determined experimentally at several pulling angles(0$^{\circ}$, 15$^{\circ}$, 30$^{\circ}$,45$^{\circ}$and 60$^{\circ}$) and at different harvesting seasons from August to November 1999 using an universal testing machine. The detachment force of mature fruits of boxthorn decreased as the pulling angle increased and varied with the harvesting season. The detachment force however did not gradually decreased as the harvesting season advanced due to difference of maturity of fruits from one harvesting season to another. Among three varieties of boxthron Cheongyang gugija Cheongyang native and Cheongyang ＃2, the maximum detachment force was 1.24 N at the pulling angle of zero degree. The highest detachment forve(1.29 N) of mature fruits of boxthorn appeared at the harvesting season of August, 1999.

• The Korean Journal of Rheology
• /
• v.7 no.2
• /
• pp.120-127
• /
• 1995

중량비가 측쇄의 함량이 각각 4.37%(시료I)와 8.97%(시료II)인 두종류의 사과 펙틴을 이용하여 측쇄가 펙틴용액의 점탄성에 미치는 역할에 대하여 연구하였다. 시료II가 시료 I보 다 동일한 농도에서 더높은 전단속도에서는 오히려 시료 I의 전단점도가 시료 II보다 높은 값을 보였다. 시료I과 시료 II의 η0는 농도에 대하여 각각 η0 C4.23의 관계를보여 시료II가 더높은 농도의존성을 보였다. 한편 용액의 탄성특성을 나타내는 저장탄성계수(G＇)와 zero-shear recoverable compliance(Jeo)의 경우에는 시료II가 시료I보다 높은 값을 보였는데 이는 측쇄가 탄성과 밀접한 관계가 있다는 것을 의미한다. 펙틴용액의 전단점도와 복소점도 를 비교했을 때 거의 비슷한 값을 보였으나 예외적으로 고측쇄의 시료 II의 경우 고농도에 서 서로 상이한 값을 보였다. 본연구의 결과는 진한 용액하에서 측쇄가 분자간의 상호엉킴 에 상당한 기여를 하고 있음을 나타내었다.

• Journal of the Korean Statistical Society
• /
• v.36 no.1
• /
• pp.1-29
• /
• 2007

Suppose one is trying to estimate a high dimensional vector of parameters from a series of one observation per parameter. Often, it is possible to take advantage of sparsity in the parameters by thresholding the data in an appropriate way. A marginal maximum likelihood approach, within a suitable Bayesian structure, has excellent properties. For very sparse signals, the procedure chooses a large threshold and takes advantage of the sparsity, while for signals where there are many non-zero values, the method does not perform excessive smoothing. The scope of the method is reviewed and demonstrated, and various theoretical, practical and computational issues are discussed, in particularly exploring the wide potential and applicability of the general approach, and the way it can be used within more complex thresholding problems such as curve estimation using wavelets.

• Korean Journal of Food Science and Technology
• /
• v.31 no.3
• /
• pp.870-874
• /
• 1999

농후한 점도영역에서 감귤류 펙틴용액에 NaCl을 첨가하였을 때 점도 및 점탄성 변화를 연구하였다. NaCl의 농도가 증가함에 따라 펙틴용액의 점도도 점차 증가하였으며, 1.5 M의 NaCl을 첨가한 경우 점도가 약 3배 증가하였다. NaCl의 첨가에 따른 점도특성의 일반화 곡선으로서 ${\eta}/{\eta}_0$ 대 $\dot{\gamma}/\dot{\gamma}_{0.8}$ 관계는 상대적으로 낮은 중첩도를 보였다. Zero-shear viscosity $({\eta}_0)$와 NaCl 농도(C)와는 ${\eta}_0\;{\propto}\;10^{0.32C}$의 관계를 보였으며, 이때 상관계수(R2)는 0.995였다. 한편, NaCl 농도가 증가함에 따라 저장탄성률(G#)과 손실탄성률(G@)이 모두 증가하였다.

• Journal of the korean Society of Automotive Engineers
• /
• v.10 no.3
• /
• pp.51-59
• /
• 1988

The wake structure behind a van type vehicle was studied experimentally with a 5-hole yawhead probe. Through an effective calibration method of the 5-hole yawhead probe, the flow properties such as velocity vector, total pressure and static pressure were obtained on two cross sections within the wake. These results combined with the surface flow visualization performed in the previous study, yielded some information about the wake structure. When the model was placed in a stream with zero yaw angle, two counter rotating vortices were observed behind the model which pull down the surface flow on each side of the model. With increasing the yaw angle, the surface flow on the windward side changed to divide the flow in two directions, one flows upward on the upper part and the other flows downward on the lower part of the windward side. Hence a new weak vortex was created on the upper windward side, which resulted 3 vortices within the wake. The size and the strength of the vortices increased with yaw angle.

• Korea-Australia Rheology Journal
• /
• v.17 no.2
• /
• pp.35-40
• /
• 2005

Nanofluid is a novel heat transfer fluid prepared by dispersing nanometer-sized solid particles in traditional heat transfer fluid to increase thermal conductivity and heat transfer performance. In this research we have considered the rheological properties of nanofluids made of CuO particles of 10-30nm in length and ethylene glycol in conjunction with the thermal conductivity enhancement. When examined using TEM, individual CuO particles have the shape of prolate spheroid of the aspect ratio of 3 and most of the particles are under aggregated states even after sonication for a prolonged period. From the rheological property it has been found that the volume fraction at the dilute limit is 0.002, which is much smaller than the value based on the shape and size of individual particles due to aggregation of particles. At the semi-dilute regime, the zero shear viscosity follows the Doi-Edwards theory on rodlike particles. The thermal conductivity measurement shows that substantial enhancement in thermal conductivity with respect to particle concentration is attainable only when particle concentration is below the dilute limit.