• Steel and Composite Structures
• /
• v.19 no.4
• /
• pp.829-841
• /
• 2015

In this paper, a refined exponential shear deformation beam theory is developed for bending analysis of functionally graded beams. The theory account for parabolic variation of transverse shear strain through the depth of the beam and satisfies the zero traction boundary conditions on the surfaces of the beam without using shear correction factors. Contrary to the others refined theories elaborated, where the stretching effect is neglected, in the current investigation this so-called "stretching effect" is taken into consideration. The material properties of the functionally graded beam are assumed to vary according to power law distribution of the volume fraction of the constituents. Based on the present shear deformation beam theory, the equilibrium equations are derived from the principle of virtual displacements. Analytical solutions for static are obtained. Numerical examples are presented to verify the accuracy of the present theory.

• 한국연소학회:학술대회논문집
• /
• 2004.06a
• /
• pp.57-63
• /
• 2004

A two-dimensional direct numerical simulation was performed to investigate the flame behaviors of $CH_4/N_2$-Air counterflow nonpremixed flame interacting with a single vortex. The detailed transport properties and a modified 16-step augmented reduced mechanism based on Miller and Bowman's detailed reaction mechanism are adopted in this calculation. The results showed that an initially flat stagnation plane, on which an axial velocity was zero, was deformed into a complex-shaped plane, and an initial stagnation point was moved far away from a vortex head when the counterflow field was perturbed by the vortex. It was noted that the movement of stagnation point could alter the species transport mechanism to the flame surface. It was also identified that the altered species transport mechanism affected the distributions of the mixture fraction and the scalar dissipation rate.

• Korean Journal of Mathematics
• /
• v.23 no.3
• /
• pp.439-446
• /
• 2015

In this paper we consider the meromorphic function G(z) with a pole of order 1 at -a and analytic function F(z) with a zero -a of order 2 in $\mathbb{D}=\{z :{\mid}z{\mid}<1\}$, where -1 < a < 1. From these functions we obtain the regular simply-connected minimal surface $S=\{(u(z),\;{\nu}(z),\;H(z)):z{\in}\mathbb{D}\}$ in $E^3$ and the harmonic function $f=u+i{\nu}$ defined on $\mathbb{D}$, and then we investigate properties of the minimal surface S and the harmonic function f.

• Bulletin of the Korean Mathematical Society
• /
• v.50 no.6
• /
• pp.1887-1903
• /
• 2013

We continue the study of McCoy condition to analyze zero-dividing polynomials for the constant annihilators in the ideals generated by the coefficients. In the process we introduce the concept of ideal-${\pi}$-McCoy rings, extending known results related to McCoy condition. It is shown that the class of ideal-${\pi}$-McCoy rings contains both strongly McCoy rings whose non-regular polynomials are nilpotent and 2-primal rings. We also investigate relations between the ideal-${\pi}$-McCoy property and other standard ring theoretic properties. Moreover we extend the class of ideal-${\pi}$-McCoy rings by examining various sorts of ordinary ring extensions.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.4
• /
• pp.1-7
• /
• 1999

This study was carried out to simulate the change of various properties of recycled water when zero-discharge system was applied to a KOCC recycling process. contaminants such as chemical oxygen demand, anionic trash, and calcium hardness were gradually increased in the process water as the recycling was repeated . Especially, the increase of anionic trash and COD were closely related to the starch derived from corrugating adhesive in KOCC. Four kinds of water were compared in the preparation of handsheet to evaluate the performance of retention program. Waters used in this work were laboratory tab water, process water from Dong-II mill and the same one treated by UASB process, and closed white water prepared by KRICT. The result revealed that one the major factors fro reducing a retention power was the anioni trash accumulated in the recycled water.

• Structural Engineering and Mechanics
• /
• v.18 no.5
• /
• pp.671-690
• /
• 2004

An assumed strain finite strip method(FSM) using the non-periodic B-spline for a shell is presented. In the present method, the shape function based on the non-periodic B-splines satisfies the Kronecker delta properties at the boundaries and allows to introduce interior supports in much the same way as in a conventional finite element formulation. In the formulation for a shell, the geometry of the shell is defined by non-periodic B3-splines without any tangential vectors at the ends and the penalty function method is used to incorporate the drilling degrees of freedom. In this study, new assumed strain fields using the non-periodic B-spline function are proposed to overcome the locking problems. The strip formulated in this way does not posses any spurious zero energy modes. The versatility and accuracy of the new approach are demonstrated through a series of numerical examples.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 1999.02a
• /
• pp.26-29
• /
• 1999

Superconducting $YBa_{2}$$Cu_{3}$ $O_{7-x}$(YBCO) thin films were deposited on MgO(100) substrates using a hollow cathode discharge sputtering system. Influence of the sputtering conditions such as substrate temperature and discharge sputtering gas pressure on electrical and structural properties were investigated. It was found that YBCO thin films with zero resistance temperature higher than 85 K were obtained to the pressure 200 mToorr(Ar/O2=0.9), substrate temperature of $760^{\circ}C$, and target-substrate distance of 10 mm during film deposition. Homogeneous large area YBCO films with 2 inch diameter were also sucessfully fabricated by this method.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.206-207
• /
• 2014

Blast furnace slag is one kind of industrial by-product and was utilized with recycled fine aggregates for the manufacture of zero cement mortar. As the blast furnace slag was from different areas, the strength of the specimen using blast furnace slag showed different performances. In this study, blast furnace slag generated in different areas in Korea has been chosen, fundamental performances of the blast furnace slag blended mortar has been tested to evaluate the quality of the blast furnace slag. Results showed that difference for flowability is limited. As the alkali activation of the blast furnace slag, the compressive strength showed different results. The flexural strength showed little difference when the aggregates and types of blast furnace slag changed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.10
• /
• pp.2303-2309
• /
• 1997

This paper presents a convergence analysis of the stocastic gradient adaptive algorithm based on the least mean absolute third (LMAT) error criteriohn. Under the assumption that the signals involved are zero-mean, wide-sense sateionaryand gaussian, a set of nonlinear difference equations that characterizes the mean and mean-squared behavior of the algorithm is derived. Computer simulation resutls show fairly good agreements between the theoetical and empirical behaviors of the algorithm.

• Progress in Superconductivity and Cryogenics
• /
• v.7 no.1
• /
• pp.13-16
• /
• 2005

High temperature superconductor, $\YBa_2Cu_3O_{7-x}$ (YBCO) and ferroelectric, $\Ba_{0.1}Sr_{0.9}TiO_{3}$ (BST) multilayer thin films were deposited using on MgO(100) substrates pulsed laser deposition. The thin films exhibited only (001) peaks of YBCO and 1357 The HTS thin films demonstrated excellent zero resistance temperature of 92.5 K. We designed and fabricated HTS ferroelectric phase shifter using high frequency system simulator and standard photolithography method, respectively The HTS phase shifter shows a low insertion loss (2.97 dB) and large phase change ($\162^{circ}$) with 40 V do bias at 10 GHz. The HTS phase shifter shows 54 of figure of merit. These results can be applicable to phased anay antenna system for satellite communication services.