• 제목/요약/키워드: zero pattern

검색결과 242건 처리시간 0.025초

디바이디드 스커트(Divided Shirt)의 패턴 연구 -외관과 기능성에 영향을 미치는 요인을 중심으로- (A Study on Divided Shirt Pattern -Fro influential Factor on the Appearance and the Function-)

  • 서미아;이미옥
    • 복식문화연구
    • /
    • 제5권4호
    • /
    • pp.112-129
    • /
    • 1997
  • This research, focused on the curved of the lower body, designated abdomen and hip gradient, crotch depth and crotch width the factors for which are able to influence on the appearence and the function of Divided Skirt and analized the changes when that were applied to a real pattern, and so the purpose of this research is to show the basic documents needed to design a Divided Skirt pattern fitting with the wear purpose and usage. The following are the results of this research. 1. The abdomen and hip gradient turned out as the most influential factor on the appearance and the function of Divided Skirt. The pattern of which the abdomen and hip gradient was designated as vertical zero degree, showed an excellent appearance and in case of function, the pattern of which thw angle of the abdomen and hip gradient of human body type was applied to itself without a particular designation turned out excellent. 2. In case of crotch depth, the pattern which had crotch depth+2㎝, had a better appearance but influced nothing on function. 3. The factor of crotch width didn\`t have any influence on the appearance and function of Divided Skirt. 4. Referring to the results of the above, the Divided Skirt pattern of which the appearance and the function turned excellent, had the angle of abdomen gradient 4 degrees, the angle abdomen gradient 4 degrees, the angle of hip gradient/2+2.5 degrees, crotch depth+2㎝ and crotch width following human body type. In case of Divied Skirt worn when going out, the pattern which had the angle of abdomen and hip gradient vertical zero degree, crotch depth+2㎝ and crotch width following human body type, turned out suitable. Also, the suitable pattern of Divided Skirt for working had the abdomen and hip gradient following human body type, crotch depth+2㎝ and covering girth diameter/2±1㎝.

  • PDF

DTV시스템에서의 정적 화질 테스트를 위한 고화질 스트림의 생성 (Generation of high quality stream for static picture quality test in DTV system)

  • 이광순;한찬호;장수욱;김은수;송규익
    • 한국통신학회논문지
    • /
    • 제29권2C호
    • /
    • pp.315-323
    • /
    • 2004
  • 본 논문은 디지털 TV 시스템의 화질 테스트를 위해 사용될 수 있는 정적 비디오 테스트 패턴에 대한 고화질 스트림을 생성할 수 있는 방법을 제안하고 있다. 이를 위해 정적 비디오 테스트 패턴의 부호화에 적합하고 양자화로 인한 화질의 손실을 최소화할 수 있는 사용자 양자화 테이블을 제안하고 있으며, 정적 테스트 패턴의 부호화 과정에서 발생할 수 있는 비디오 버퍼의 넘침 및 고갈 현상을 적응적인 제로 추가 방법을 이용하여 해결함으로써 최적의 화질을 구현하였다. 제안한 알고리즘을 실험해 본 결과 안정된 전송률을 나타낼 뿐만 아니라 화질 또한 멀티버스트 패턴에서 기존 방식 보다 약 3 dB 정도의 우수함을 보여 DTV 시스템의 테스트에 적합함을 알 수 있었다.

Sensorless Control of Non-salient Permanent Magnet Synchronous Motor Drives using Rotor Position Tracking PI Controller

  • Lee Jong-Kun;Seok Jul-Ki
    • KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
    • /
    • 제5B권2호
    • /
    • pp.189-195
    • /
    • 2005
  • This paper presents a new velocity estimation strategy for a non-salient permanent magnet synchronous motor drive without high frequency signal injection or special PWM pattern. This approach is based on the d-axis current regulator output voltage of the drive system, which contains the rotor position error information. The rotor velocity can be estimated through a rotor position tracking PI controller that controls the position error at zero. For zero and low speed operation, the PI gain of the rotor position tracking controller has a variable structure according to the estimated rotor velocity. Then, at zero speed, the rotor position and velocity have sluggish dynamics because the varying gains are very low in this region. In order to boost the bandwidth of the PI controller during zero speed, the loop recovery technique is applied to the control system. The PI tuning formulas are also derived by analyzing this control system by frequency domain specifications such as phase margin and bandwidth assignment.

전경 물체 추출 기법을 이용한 전기트리 영상에서 열화 측정 (Degradation Measurement from Electrical Tree Image Using Foreground Object Extracting Skill)

  • 김형균;정기봉;고석만;오무송;김태성
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
    • /
    • pp.270-273
    • /
    • 2001
  • Electrical tree is studied widely by manufacture state of insulating material fare and blazing fire diagnosis system of use in phenomenon of part discharge that happen for main cause of dielectric breakdown of equipment for electric power. Use process that draw tree pattern here measuring above zero to study special quality of this electricity tree, real-time processing by image processing is proposed because reproduction of tree blazing fire process drops and pattern of tree is difficult correct quantification of tree growth by existent visual observation by involution. This research presents general process that need in image processing of tree blazing fire, and that remove various noises that happen in above zero by measuring electrical tree dividing background and complete view in measured above zero taking advantage of specially proposed complete view object abstraction techniques effectively and quantification of tree becomes easy naturally, can apply to dielectric breakdown estimate because can chase growth process of tree.

  • PDF

Polymethacrylic Acid 하이드로겔 매트릭스로부터의 pH 의존성 약물 방출 (pH-Dependent Drug Release from Polymethacrylic Acid Hydrogel Matrix)

  • 김경충;김길수;이승진
    • Journal of Pharmaceutical Investigation
    • /
    • 제19권4호
    • /
    • pp.179-183
    • /
    • 1989
  • Drug release experiments were performed based on pH-sensitive swelling behaviors of polymethacrylic acid. 5-Fluorouracil as a nonionic model drug revealed release patterns depending solely on pH-dependent swelling kinetics of polymethacrylic acid. In contrast, release of propranolol hydrochloride as a cationic model drug was significantly affected by ionic drug-polymer interaction as well as the swelling kinetics. Accordingly, a zero-order release pattern was obtained at pH 7, which was distinguished from the general matrix type drug release pattern.

  • PDF

이족보행로봇의 동적보행과 역동역학 해석 (Dynamic Walking and Inverse Dynamic Analysis of Biped Walking Robot)

  • 박인규;김진걸
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 춘계학술대회논문집A
    • /
    • pp.548-555
    • /
    • 2000
  • The dynamic walking and the inverse dynamics of the biped walking robot is investigated in this paper. The biped robot is modeled with 14 degrees of freedom rigid bodies considering the walking pattern and kinematic construction of humanoid. The method of the computer aided multibody dynamics is applied to the dynamic analysis. The equations of motion of biped are initially represented as terms of the Cartesian coordinates, then they are converted to the minimum number of equations of motion in terms of the joint coordinates using the velocity transformation matrix. For the consideration of the relationships between the ground and foot, the holonomic constraints are added or deleted on the equations of motion. The number of these constraints can be changed by types of walking pattern with three modes. In order for the dynamic walking to be stabilizable, optimized trunk positions are iteratively determined by satisfying the system ZMP(Zero Moment Point) and ground conditions.

  • PDF

수렴성 빔 전자회절 도형을 이용한 Al-Ti 합금의 상 분석 (Phase Identification of Al-Ti Alloys Using Convergent Beam Electron Diffraction Pattern)

  • 김혜성
    • 한국산업융합학회 논문집
    • /
    • 제4권2호
    • /
    • pp.149-155
    • /
    • 2001
  • The use of primitive cell volume and zero order Laue (ZOLZ) pattern is proposed to identify phase in a complex microstructure. Single convergent beam electron pattern containing higher order Laue zone ring from a nanosized region is sufficient to calculate the primitive cell volume of the phase, while ZOLZ pattern is used to determine the zone axis of the crystal. A computer program is used to screen out possible phases from the value of measured cell volume from convergent beam electron diffraction (CBED) pattern. Indexing of ZOLZ pattern follows in the program to find the zone axis of the identification from a single CBED pattern. An example of the analysis is given from the rapidly solidified $Al-Al_3Ti$ system.

  • PDF

상향 링크 케이블 모뎀 시스템을 위한 동기 방법 (Research of Synchronization Schemes for Uplink Cable Modem System)

  • 김영제;오왕록;김환우
    • 대한전자공학회논문지TC
    • /
    • 제45권2호
    • /
    • pp.6-12
    • /
    • 2008
  • 본 논문에서는 상향 링크 케이블 모뎀 시스템에 대한 동기화 방법에 대하여 제안하였다. 상향 링크의 케이블 모뎀 시스템은 DOCSIS(data over cable service interface specification) 규격에 의해 정해져 있으며, 이에 맞는 동기화 방법에 관하여 연구하였다. 케이블 모뎀은 버스트 모드로 동작하며 시 분할 다중 접속(time division multiple access, TDMA) 버스트 포맷을 사용한다. 버스트 포맷은 프리앰블과 데이터 구간으로 나뉜다. 본 논문에서는 프리앰블을 이용한 프레임 동기, coarse 타이밍 동기, 반송파 주파수 동기, 반송파 각 동기 방법을 연구하였으며, 프리앰블로 이용할 시퀀스로 correlation 특성이 우수한 CAZAC(constant envelope zero-autocorrelation) 시퀀스를 이용하였다. 또한 타이밍 드리프트가 존재하는 경우와 나머지 주파수 오프셋이 주는 영향을 고려하여 데이터 구간에서 심벌 타이밍 동기방식과 주파수 각 오프셋 추정박식을 채택하여 시스템을 구성하였고, 이를 컴퓨터 실험 결과를 이용하여 성능을 검증하였다.

친환경 패션산업 동향과 쓰레기 발생 감량화(Zero Waste)를 위한 실험적 디자인 사례 연구 (Eco-Fashion Industry Trend and Creative Fashion Design Technic for Zero-Waste)

  • 박혜원
    • 패션비즈니스
    • /
    • 제16권4호
    • /
    • pp.29-45
    • /
    • 2012
  • The purpose of this study is for providing not only the latest design technique trend for zero waste fashion, but information about creative fashion design education through eco-fashion industry trend in globally and domestic which is focusing on eco-fashion labelling. The research were processed with literature related eco, sustainable, green fashion books, former articles, newspapers, and web sites. The results as follows; The certification about eco-fashion product is moving to 'Life Cycle Assessment' from focused on primary process like material, finishing, dyeing. Especially simplicity of process means reducing the wastes. And fabric wastage for adult outwear was estimated 15% percent of total fabric used in general design studios. Three cases for Zero waste fashion were as follows; First, Jigsaw puzzle by Timo Rissane and Mark Liu were different zero waste methods, but the result was same. Rissene's method was based on traditional cutting like 'cut and sew' but traditional cutting can lead to design that have an abundance of fabric and drape. Jigsaw of Rissene was approached with description a pattern-cutting technique in which all piece interlock with each other generating no waste from design production. Another Jigsaw by Liu was related with innovative textile design. DTP makes the possibilities for zero waste garment production almost endless. The dress intricately cut from 10 pieces, wastes none of the fabric required to make it. Second, Subtraction Cutting by Julian Roberts provides unexpected fluid, organic forms and zero waste fabric. Utilizing Roberts plug(tunnel) technique enables any part of the garment that is removed for fit or aesthetics to be reincorporated into the design of garment. Third was 'Bio Couture' by Suzanne Lee. She has created garments from cellulose bacteria which grow in a bathtub using only green methods addressing in such as way ecological issues and exploring the future of fashion design in conjunction with technology.

파밤나방(Spodoptera exigua (H bner)) 유충 줄무늬 형질의 유전변이 (Genetic Variation of Larval Stripe Patterns of Spodoptera exigua(Hubner))

  • 김용균
    • 한국응용곤충학회지
    • /
    • 제37권2호
    • /
    • pp.163-170
    • /
    • 1998
  • 파밤나방(Spodoptera exigua (H bner)) 유충의 형태적 유전지표를 규명하기 위해 유충의 체색과 줄무늬 변이에 관하여 분석하였다. 유충 체색은 먹이 종류에 따라 다양했다. 유충 줄무늬는 배선과 측선의 존재에 따라 3종류의 형질 개체로 나뉘었다. 3줄무늬(배선과 측선 모두존재), 1줄무늬(배선만존재), 0줄(배선과 측선 모두 없음). 이들 형질이 유전적 영향에 있는지를 조사하기 위해 3줄과 1줄집단으로 집단선발한 결과 각 선발 형질의 비율이 증가했다. 3줄과 1줄집단을 상호교배하였을 때 3줄 형질이 우성을 보였다. 줄무늬 형질에 있어서 협의의 유전력(h$^2$)은 $0.50\pm$0.42로 산출되었다. 0줄집단에서 암컷수가 수컷수에 비해 약2배 많았다. 환경적 요인을 조사하기 위해 동일 집단을 3종류의 먹이에서 사육했을때 인공사료와 상치로 키운 집단간에는 유충줄무늬에는 유의성있는 차이는 없지만 파로 사육된 집단에서는 3줄개체의 비율이 낮아져 차이를 보였다. 이들 유충의 줄무늬는 유충과 용의 발육속도 및 내한성과 연관성을 보였으나 살충제 감수성과는 무관함을 나타냈다.

  • PDF