• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2604-2606
• /
• 1999

The dead time deteriorates the output performance of the PWM inverter so that various compensation schemes have been proposed. If the modulation index is rendered with the low output frequencies, those schemes do not work well because of the zero clamping phenomena. In this paper, we investigate the influence of the dead time minimization algorithm on the low output voltage reference. The validity of the algorithm is examined by comparing the simulation results with those of conventional methods.

• ETRI Journal
• /
• v.28 no.1
• /
• pp.87-90
• /
• 2006

In this letter, we propose a quasi-orthogonal space-time-frequency (QOSTF) block coded orthogonal frequency division multiplexing (OFDM) that can achieve full symbol rate with four transmit antennas. Since the proposed QOSTF-OFDM cannot achieve full diversity, we use a diversity advantage collection with zero forcing (DAC-ZF) decoder to compensate the diversity loss at the receiving side. Due to modulation advantage and collected diversity advantage, the proposed scheme exhibits a better bit-error rate performance than other orthogonal schemes.

• Journal of Industrial Technology
• /
• v.21 no.A
• /
• pp.51-57
• /
• 2001

In this paper, a novel overmodulation strategy for space-rector PWM(SYPWM) inverters to utilize dc link voltage fully is presented. The proposed strategy uses the concept of SVPWM based on the zero sequence signal(offset voltage) injection principle. So, by modifying the pole voltage simply, the linear control of inverter output voltage over the whole overmodulation range can be achieved easily. The proposed strategy is so simple that its practical implementation is easy. The validity of the proposed strategy is confirmed by the experimental results.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.484-486
• /
• 1997

In this paper, we compose of the utility phovoltaic system with the stepdown chopper and the current source inverter to reduce pulsation of dc current and dc reactor. We study that control several ways(twice frequency of utility voltage square pulse and without the chopper) of chopper part. Therefore if voltage across the dc reactor equal to zero, it is decreased. And we control modulation factor of the chopper to operate at maximum power point around of solar cell.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.1
• /
• pp.77-85
• /
• 2009

With the advent of power semiconductor switching devices, power electronics relating to high frequency electromagnetic eddy current based induction heating technology have become more suitable and acceptable. This paper presents high-frequency induction heating cooking appliance circuit based on the zero current switching-PWM single ended push-pull(ZCS-PWM SEPP) resonant inverter added AC-DC converter. This inverter uses pulse-width-modulation(PWM) control method with active auxiliary quasi-resonant lossless inductor snubbers and a switched capacitor. To improved the transient performance, the PI controller is applied for this system. For the systematic parameter optimization of the PI controller, the gradient-based optimization algorithm is applied. The performance of optimized parameters is evaluated using simulation and experimental test. These results show that the proposed systematic optimal tuning method improve the transient performances of this system.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.883-884
• /
• 2008

디지털 제어기는 벡터 제어(Vector Control) 구현에 적합하기 때문에, 현재 대다수의 고성능 교류 전동기 구동 시스템에 사용되고 있다. 디지털 제어기를 사용하는 교류 전동기 구동 시스템에 대한 기존의 연구는 주로 디지털 제어기의 시지연이 제어 성능에 미치는 효과에 주목하였다. 그리고 디지털 제어기의 전류 샘플링 오차에 주목한 연구들은 주로 전력 변환기기의 전압 변조(PWM, Pulse Width Modulation)와 디지털 제어기의 샘플링 순간과의 관계에 따른 전류 샘플링 오차에 대해 연구하였다. 본 논문에서는 기존의 연구에서는 다루어지지 않았던 디지털 제어기의 제로-오더-홀드(Zero-Order Hold) 특성에 의해 발생하는 전류 샘플링 오차를 다룬다. 이 오차는 전동기의 전기적 회전 주파수가 디지털 제어기의 샘플링 주파수에 비해 무시할 수 없을 정도로 커지는 경우 그 영향이 두드러지게 된다. 본 논문에서는 이러한 전류 샘플링 오차를 분석하고, 이것을 보상하는 방법에 대해 서술한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.12
• /
• pp.1747-1755
• /
• 2002

A complete theoretical treatment of the photothermal displacement technique has been performed for thermal diffusivity measurement in semi-infinite solid materials. The influence of the parameters, such as radius and modulation frequency of the heating beam and the thermal diffusivity, was studied. Usually, thermal diffusivity was determined by the deformation angle and phase angle as the relative position between the heating and probe beams. In this study, we proposed the simple analysis method based on the real part of deformation gradient as the relative position between two beams. It is independent in the parameters such as power of heating beam, absorption coefficient, reflectivity, Poisson's ratio, and thermal expansion coefficient.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.85-90
• /
• 1998

A parallel-resonant converter with zero-voltage-switching, pulse-width-modulation(ZVS-PWM) control is proposed. Similar to the previously proposed series-resonant counterpart, it has a simple structure and can be controlled at a constant switching frequency using an active-clamp technique. The nearly constant current output characteristic of the parallel-resonant converter lends itself beneficially to precisely controlled constant current power supply applications. An experimental breadboard featured an accuracy of $\pm$1% for an output current of 2A, with an efficiency of 75%.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.355-359
• /
• 2002

Much attention has been given to EMI effects created in variable speed ac drive system. Zero switching states of inverter control invoke large common mode voltage. This paper focuses on the switching techniques to mitigate common mode voltage. This paper proposes a common-mode voltage reduction method based on sinusoidal pulse width modulation in three phase PWM inverter system. By using three carriers wave displaced by 120 degrees, it is possible to eliminate a common mode voltage pulse In one control period. Simulation and experimental results show that common mode voltages In the proposed technique are reduced more than conventional technique.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.525-528
• /
• 2002

A Novel Zero Current Switching(ZCS) Pulse Width Modulation(PWM) boost converter for reducing two rectifiers reverse recovery related losses Is proposed. The switches of the proposed converter are operating to work alternatively turn-on and turn-off with soft switching(ZVS, ZCS) condition. The reverse recovery related switching losses and EMI problems of the proposed converter eliminates the reverse recovery current of the freewheeling diode(D, Dl) by adding the resonant inductor Lr, in series with the switch S2. The voltage and current stresses of the components are similar to those in its conventional hard switching counterpats. As mentioned above, the characteristics are verified through experimental results.