• 대한수학회보
• /
• 제35권3호
• /
• pp.465-471
• /
• 1998

The class of finite solube groups with zero deficiency known to have soluble lenght five or six is small. In this paper we exhibit some classes of such goups.

• Journal of applied mathematics & informatics
• /
• 제16권1_2호
• /
• pp.303-306
• /
• 2004

There are 49 non-metacyclic p-groups of order less than 1000 with trivial Schur multiplier. In this paper we give a list of deficiency zero presentations for these groups.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.386-393
• /
• 2003

For fast Cholesky factorization, it is most important to reduce the number of non-zero elements by ordering methods. Minimum deficiency ordering produces less non-zero elements. However, since it is very slow. the minimum degree algorithm is widely used. To improve the computation time, Rothberg's AMF uses an approximate deficiency instead of computing the deficiency. In this paper we present simple efficient methods to obtain a good approximate deficiency using information related to cliques. Experimental results show that our proposed method produces better ordering quality than that of AMF.

• Structural Engineering and Mechanics
• /
• 제21권5호
• /
• pp.539-551
• /
• 2005

Finite elements based on isoparametric formulation are known to suffer spurious stiffness properties and corresponding stress oscillations, even when care is taken to ensure that completeness and continuity requirements are enforced. This occurs frequently when the physics of the problem requires multiple strain components to be defined. This kind of error, commonly known as locking, can be circumvented by using reduced integration techniques to evaluate the element stiffness matrices instead of the full integration that is mathematically prescribed. However, the reduced integration technique itself can have a further drawback - rank deficiency, which physically implies that spurious energy modes (e.g., hourglass modes) are introduced because of reduced integration. Such instability in an existing stiffness matrix is generally detected by means of an eigenvalue test. In this paper we show that a knowledge of the dimension of the solution space spanned by the column vectors of the strain-displacement matrix can be used to identify the instabilities arising in an element due to reduced/selective integration techniques a priori, without having to complete the element stiffness matrix formulation and then test for zero eigenvalues.

• 동의신경정신과학회지
• /
• 제25권4호
• /
• pp.383-388
• /
• 2014

Objectives: Patients with dementia are increasing in Korea. So the importance of accurate diagnosis and treatment of dementia is growing. In this paper, we evaluated the result of employing the Korean medical diagnostic pattern as a tool in clinics. Methods: Patients diagnosed with Alzheimer's disease were evaluated using the Korean medical diagnostic pattern tool. Results: The number of patients with liver-kidney yin deficiency pattern/syndrome was 35. Analyzing the ratio difference between the 'liver-kidney yin deficiency' group and the 'not liver-kidney yin deficiency' group revealed that the ratio of the responses to the fourth question was less than zero. The ratio of the responses to the fifth, seventh, and eight questions were all less than 10%. The ratio of the responses to the first and second questions were greater than 30%. Conclusions: Of the six diagnostic patterns, liver-kidney yin deficiency was the greatest in the study subjects. The fourth question in the liver-kidney yin deficiency tool tests for the lack of appropriateness whereas the fifth, seventh, and eight questions test for lack of discrimination. Applying more weight to the first and second questions was an excellent choice to increase the discrimination.

• 한국안광학회지
• /
• 제16권1호
• /
• pp.107-116
• /
• 2011

목적: 콘택트렌즈 피팅 시 렌즈 관련 사양의 변화에 따라 다른 값을 가지는 각막에서 산소부족이 없는 최소 Dk값 및 산소농도를 계산/확인할 수 있는 프로그램을 수립하고자 하였다. 방법: 엑셀 프로그램을 이용하여 콘택트렌즈착용 시 렌즈 아래 형성되는 눈물층의 두께와 Dk값을 계산할 수 있는 방정식을 세우고 수치 계산 모델을 확립하였다. 결과: 렌즈사양을 변화시키면 렌즈 아래 눈물층의 두께가 변하며 이에 따라 산소투과도가 다르게되므로 각막이 요구하는 최소 산소농도 역시 달라짐을 계산으로 확인하였으며, 눈물층의 두께를 위한 계산 프로그램은 눈물층의 형태에 따라 다르게 선택되어야 함을 밝혔다. 즉, flat 피팅 시에는 렌즈가장자리와 각막이 만나서 만들어지는 오목면의 형태에 따라 렌즈 아래 눈물층의 두께가 결정되며, flat하게 피팅 될수록 각막주변부 표면의 산소농도는 감소되어 계산값으로는 (-)가 되며 실제로는 산소농도는 0이 된다. Tight 피팅 시 각막표면의 산소를 계산하면 tight 피팅으로 눈물층의 두께가 렌즈의 두께보다 극단적으로 두꺼워지게 되어 계산값은 역시 (-)가 되며 각막 표면의 산소 농도는 0이 되어 산소결핍을 야기하게 됨을 알 수 있다. 결론: 콘택트렌즈의 변수를 조절하여 피팅 상태를 변경할 때에는 눈물층의 두께와 이에 따른 각막표면의 산소농도를 정확하게 계산하여 산소결핍이 나타나는 일이 없도록 하여야 한다.

• 한국세라믹학회지
• /
• 제27권3호
• /
• pp.299-310
• /
• 1990

The fabrication of Y-Ba-Cu-O films and experimental factors affecting to characteristics of films are studied in detail. Superconducting thick films are fabricated by the screen printing method. The metal-citrate precursors are obtained simply by mixing of metal nitrate with citric acid. The particle size of heat treated powders is approximately 0.3-1${\mu}{\textrm}{m}$ and the thickness of film is estimated as 30-35${\mu}{\textrm}{m}$. According to the XRD analysis, the films sintered at 870-93$0^{\circ}C$ for 10min. -6hr with P(oxygen)=1atm has the unique orthorhombic crystal symmetry indicating the 123 phae. Tc, onset is determined around 92-87。K, but it shows semiconducting behavior probably due to the oxygen deficiency in the lattice, porosity and impurities in films. Extrapolated Tc, zero is estimated as 76-50。K. For films sintered at 90$0^{\circ}C$ for 1hr, superconducting properties are observed with the room temperature resistivity of 0.025$\Omega$.cm Tc, onset at 88。K and Tc, zero at 63。K.

• 한국재료학회지
• /
• 제8권10호
• /
• pp.925-930
• /
• 1998

LPE법을 이용하여 $Bi_2Sr_2-\chi_LCa_1+\chi_LCu_2O_{8+d}$(xL=0, 0.1, 0.2 ,0.3, 0.4, 0.5, 0.6)막(film)을 작성하여 XPS 측정과 EPMA측정을 통하여 Sro-layer와 Ca-layer에 있어서 Sr과 Ca의 상호치환 상태와 초전도특성을 조사하였다. 작성한 막(film)은 c-축으로 강하게 배향되었고, $\chi_L$(용액조성비)의 증가에 따라 임계온도 $T_C^{zero}$와 c-축의 길이는 단조로이 감소를 보였으며, Car-rier농도는 약간 감소하는 경향을 보였다. 또한, SrO-layer에서는 Sr은 $\chi_L$의 증가에 따라 감소를 보이며, Ca는 약 0.15에 포화된 후 약간 감소하였다. Ca-layer에서의 Sr과 Ca는 $\chi_L$에 비례적으로변하며, 이때 변화율은 SrO-layer보다 컸다. 이런 현상은 Sr이 양쪽 layer에서 감소하는데 비하여, Ca는 거의 Ca-layer에서만 증가함을 의미하는 것이다. $\chi_L$의 증가에 따라, SrO-layer에서의 결손은 증가를 보였으며, 이는 SrO-layer에서 결손이 임계온도 $T_C^{zero}$의 감소에 영향을 미쳤다고 생각된다.

• 대한한방부인과학회지
• /
• 제32권2호
• /
• pp.29-49
• /
• 2019

Objectives: This study was a methodological study to verify the reliability and validity and to make a diagnosis of a diagnostic tool for climacteric and postmenopausal syndrome pattern identification (CaPSPI). Methods: This study was conducted from June 1, 2018 to October 18, 2018 with ${{\bigcirc}{\bigcirc}}$ University Korean Medicine Hospital IRB's approval (2018-3). To make a diagnosis using CaPSPI, we decided the cut-points for the tool. Three professors of ${{\bigcirc}{\bigcirc}}$Korean Medical University conducted pattern identification diagnosis. The result is marked from 0 to 3, 0 is 'No', 1 is 'Slightly Yes', 2 is 'Yes' and 3 is 'Very Yes'. And if two or more professors' diagnoses are the same, we took the diagnoses as a diagnostic criteria. The decision of pattern by three experts converted to 0-1 scores in two ways. In "method 1", if the diagnosis was zero points, the score was 0 (have no such identification), and the rest was 1 (have such identification). In "method 2", if the diagnosis was zero or 1 point, the score was 0, and the rest was 1. After that, intraclass correlation was calculated for experts agreement. And logistic regression was conducted. A response variable was the results of the experts' diagnosis and an explanatory variable was the results of the pattern identification diagnostic tool. Results: The diagnosis of the three experts showed excellent concordance of more than 0.794 and showed a significant correlation with the diagnostic tool. Both 'Method 1' and 'Method 2' showed statistically significant effects with the diagnosis of 3 experts and the results of the diagnostic tool. The frequency of cumulative pattern identification diagnosis in 'Method 1' and 'Method 2' were found to be 578 occasions and 203 occasions, respectively. The average number of pattern held by participants in 'Method 1' and 'Method 2' were found to be 5.26 and 1.85, respectively. In both "Method 1" and "Method 2," the yield frequency of liver qi depression was the highest, and the frequency of kidney yin deficiency and liver-kidney yin deficiency was relatively high. Conclusions: Based on the above results, it is thought that, in diagnosis using CaPSPI of menopausal women, 'method 1' could be used for the health diagnosis and prevention, 'method 2' could be used for the pattern diagnosis. On the conclusion, CaPSPI is thought to be available for pattern diagnosis of menopause women.

• 펄프종이기술
• /
• 제30권2호
• /
• pp.47-54
• /
• 1998

Refining is one of the most important processes of fiber treatment that provides optical and physical properties of final paper products. The evaluation method of refining progress is usually freeness (CSF) or wetness (SR) test because of its rapidity and convenience. However, there are some deficiencies in using freeness or wetness test to evaluate pulp fibers accurately because its results are more influenced by fines contents than extent of fibers treatment. The objective of this study is to show the deficiency of wetness in evaluating the refining process. For this, beating is done by varying the beating load. Handsheets are made after beating until 25 and $32^{\circ}C$ SR, and then paper properties are measured. Refined fibers are analyzed by fiber length, fines contents, curl, kink, WRV, and zero-span tensile strength. The results show that longer beating time is required to reach the same wetness at lower beating load. There are differences in the average fiber length, distribution curve of fiber length, fines contents, curl, kink, WRV of long fiber fraction, drainage time, and zero-span tensile strength of rewetted sample at different beating load. At the low beating load in the same wetness, apparent density, breaking length, burst strength, and tear strength are higher, while opacity and air permeability are lower than those of the high beating load. Using Page s equation, which shows the relationship among tensile strength, intrinsic fiber strength, and interfiber bonding strength, interfiber bonding strength is calculated and analyzed to explain final paper properties. At $25^{\circ}C$ SR, interfiber bonding strength is only slightly higher at 2.5kgf beating load, while the intrinsic fiber strength is substantially higher. At $32^{\circ}C$ SR, intrinsic fiber strength is a little bit higher at 2.5kgf beating load, and interfiber bonding strength is remarkably higher than those of 5.6kgf beating load. These results can be used to explain the different properties of the final paper at selected beating loads.