• International Journal of Highway Engineering
• /
• v.18 no.3
• /
• pp.21-32
• /
• 2016

PURPOSES : In this paper, the analytical solutions suggested to simulate the behavior of rheological fluids were rigorously re-derived and investigated for fixed conditions to evaluate the applicability for the solutions on a mini-cone slump test of cement paste. The selected solutions with proper boundary conditions can be used as reference solutions to evaluate the performance of numerical simulation approaches, such as the discrete element method. METHODS : The slump, height, and spread radius for the given boundary and yield stress conditions that are determined by five different analytical solutions are compared. RESULTS : The analytical solution based on fluid mechanics for pure shear flow shows similar results to that for intermediate flow at low yield stresses. The fluid mechanics-based analytical solution resulted in a very similar trend to the geometry-based analytical solution. However, it showed a higher slump at high yield stress and lower slump at low yield stress ranges than the geometry-based analytical model. The analytical solution based on the mini-cone geometry was not significantly affected by the yield criteria, such as von Mises and Tresca. CONCLUSIONS : Even though differences among the analytical solutions in terms of slump and spread radius existed, the difference can be considered insignificant when the solutions were used as reference to evaluate the appropriateness of numerical approaches, such as the discrete element method.

• International Journal of Highway Engineering
• /
• v.19 no.4
• /
• pp.19-25
• /
• 2017

PURPOSES : In this paper, the flow of construction material was simulated using computational fluid dynamics in a 2D axisymmetric condition to evaluate the effect of initial or varying material properties on the final shape of a specimen. METHODS : The CFD model was verified by using a well-known analytical solution for a given test condition followed by performing a sensitivity analysis to evaluate the effect of material properties on the final shape of material. Varying dynamic viscosity and yield stress were also considered. RESULTS : The CFD model in a 2D axisymmetric condition agreed with the analytical solution for most yield stress conditions. Minor disagreements observed at high yield stress conditions indicate improper application of the pure shear assumption for the given material behavior. It was also observed that the variation of yield stress and dynamic viscosity during curing had a meaningful effect on the final shape of the specimen. CONCLUSIONS : It is concluded that CFD modeling in a 2D axisymmetric condition is good enough to evaluate fluidal characteristics of material. The model is able to consider varying yield stress and viscosity during curing. The 3D CFD-DEM coupled model may be required to consider the interaction of aggregates in fluid.

• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.1
• /
• pp.57-62
• /
• 2002

The semiconductor industry has continuously been looking for the ways to improve yield and to reduce manufacturing cost. The layout modification approach, one of yield enhancement techniques, is applicable to all design styles, but it does not require any additional resources in terms of silicon area. The layout modification method for yield enhancement consists of making local variations in the layout of some layers in such a way that the critical area, and consequently the sensitivity of the layer to point defects, is reduced. Chen and Koren (1995) proposed a greedy algorithm that removes defect sensitive area using via moving, but it is easy to fall into a local minimum. In this paper, we present a via moving algorithm using simulated annealing and enhance yield by diminishing defect sensitive area. As a result, we could decrease the defect sensitive area effectively compared to the greedy algorithm presented by Chen and Koren. We expect that the proposed algorithm can make significant contributions on company profit through yield enhancement.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.3
• /
• pp.224-231
• /
• 2003

This study was conducted to investigate the varietal differences in leaf senescence during ripening stage and its relation to grain yield of rice. During grain filling period leaf senescence was evaluated by SPAD readings (an indirect indicator of chlorophyll content) for 74 varieties including local, improved domestic, and introduced varieties in the field condition. Leaf senescence was varied greatly among 74 varieties. Jodongji and Dadajo known as local rice varieties had significantly lower SPAD value than the other varieties and became senescent rapidly. However, SPAD value of the flag leaf and 2nd leaf of SNU-SG1 were much higher than the other varieties and leaves of SNU-SG1 also showed a tendency of delayed senescence compared to the other varieties. There were significantly positive correlation between cumulated SPAD value of upper leaf(flag leaf and 2nd leaf) during 35 days after heading and grain yield divided by sunshine hour during 40 days of grain filling and compensated for temperature effect, and cumulated SPAD value of the 4th leaf showed negative correlation with the yield. That is, the delayed senescence of the upper leaves and the rapid senescence of lower leaves were positively associated with grain yield increase.

• Applied Biological Chemistry
• /
• v.16 no.3
• /
• pp.137-145
• /
• 1973

For the establishment of a model of nutritional status for various gram yield class the contents of nitrogen, phosphorus, potassium and silica at different growth stages from the results of plant analyses in N. P. K simple trial carried out countrywide for three years, were investigated in relation to grain yield (1967-1969). The increasing tendency of nutrient content in straw or grain with the increase of grain yield was N>P>K>Si. The tendency was yearly changed differently according to kind of nutrient and growth stage. Nutrient contents appear to have closer relation to the grain yield class than to the total dry matter yield class.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.15 no.4
• /
• pp.274-278
• /
• 1995

This experiment was conducted to know what does the cutting date have an effect on the chemical composition and nutritive yield of Miscanthus sinensis, in order to determine the optimum cutting date of the plant when it is utilized as roughage. Miscanthus sinensis growing natively in the summit of Sam Ak mountain(550m above sea level) was cut at 10 days intervals from 25 July to 15 October, 1988. Plant length and dry matter contents were generally increased with delayed cutting date. Crude protein contents of the plant cut on 5, 15, and 25 of September were 5.5, 5.2 and 5.1%, respectively. Cmde fiber contents was similar with cutting treatment and averaged 35.6%. Cmde protein yield was higher in September than in other cutting date. Yield of crude fiber were 8.3, 9.3 and 9.3t/ha on 5, 15 and 25 September, respectively. Ratio of Cmde protein yield to Crude fiber yield on 5 September tended to be higher than on 15 September and 25 September. These results suggest that the optimum cutting date of the Miscanthus sinensis for good quality forage seems early September.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.15 no.4
• /
• pp.279-284
• /
• 1995

The competition relationship between orchardgrass(Docflis glomerutu L. cv; Potomac) and red clover (Trifnlium prurense L. cv; Kenland) was investigated under the pure and mixed swards. Each species were grown in intra- and interspecific competition in pots and fields for 2-years. Intra- and interspecific competition were evaluated by calculating traditional methods; expected yield, relative yield total(RYT), aggressivity and compensation index(CI), and shoot and root dry matter production in the orchadgrass(ffi) pure, red clover(RC) pure and orchardgrdss(W)-red clover(RC) mixed sward. The results obtained were summarized as follows: Compared to OG and RC pure swards, the shoot and root dry maaer(DM) yield of OG-RC mixed sward were higher and more deeply rooted under the soil than those of OG and RC pure sward. Also, the number of tillen per plant of OG in the OG-RC mixed sward was less than that of OG pure sward, but that of RC in the OGRC mixed sward was more than that of RC pure sward. OG-RC mixed sward were evaluated as a productive sward type compared to OG and RC pure swards in that actual yield was higher than expect yield and that relative yield total(RYT), and compensation index(C1) were high. As mentioned above, compared to intraspecific competition as a OG and RC pure sward, interspecific competition as a OG-RC mixed sward was evaluated to productive type under the ffi and RC species utilization

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.3
• /
• pp.315-320
• /
• 2002

Test-day records (n=13677) sampled from 896 ewes in 5-9 (${\mu}$=7.5) monthly test-days were used to estimate genetic and phenotypic parameters of test-day yields, lactation milk yield (TMY), length of the milking period (DAYS) and three measures of persistency of milk yield in Boutsico dairy sheep. Τhe measures of persistency were the slope of the regression line (${\beta}$), the coefficient of variation (CV) of the test-day milk yields and the maximum to average daily milk yield ratio (MA). The estimates of variance components were obtained under a linear mixed model by restricted maximum likelihood. The heritability of test-day yields ranged from 0.15 to 0.24. DAYS were found to be heritable ($h^2$=0.11). Heritability estimates of ${\beta}$, CV and MA were 0.15, 0.13, 0.10, respectively. Selection for maximum lactation yields is expected to result in prolonged milking periods, high rates of decline of yields after peak production, variable test-day yields and higher litter sizes. Selection for flatter lactation curves would reduce lactation yields, increase slightly the length of the milking period and decrease yield variation as well as litter size. The most accurate prediction of TMY was obtained with a linear regression model with the first five test-day records.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.9
• /
• pp.1231-1236
• /
• 2005

Genetic parameters for first lactation milk production based on test day (TD) records of 56319 Iranian Holstein cows from 655 herds that first calved between 1991 and 2001 were estimated with restricted maximum likelihood method under an Animal model. Traits analyzed were milk yield and milk fat percentage. Heritability for TD records were highest in second half of the lactation, ranging from 0.11 to 0.19 for milk yield and 0.038 to 0.094 for milk fat percentage respectively. Estimates for lactation records for these traits were 0.24 and 0.26 respectively. Genetic correlations between individual TD records were high for consecutive TD records (>0.9) and decreased as the interval between tests increased. Estimates of genetic correlations of TD yield with corresponding lactation yield were highest (0.78 to 0.86) for mid-lactation (TD3 to TD8). Phenotypic correlations were lower than corresponding genetic correlations, but both followed the same pattern. For milk fat percentage no clear pattern was found. Results of this study suggested that TD yields especially in mid-lactation may be used for genetic evaluation instead of 305-day yield.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.1
• /
• pp.99-108
• /
• 2012

Soil erosion and sediment from agricultural farmland has caused various negative impacts on environment in recent years. The effect of rice straw mat on soil erosion has been investigated by many researchers these days. In this study, the SWAT model was applied to Hongcheon watershed to evaluate SWAT flow and sediment, and the effect of rice straw mat on sediment yield at watershed outlet was evaluated. The Nash-Sutcliffe model efficiency (NSE) and coefficient of determination ($R^2$) values for flow simulation (calibration period) were 0.66 and 0.67, and the NSE values for sediment was 0.90. The calibrated parameters were used to analyze the reduction of sediment yield in the farmland with rice straw mat. Average daily sediment yield without rice straw mat was 49.8 ton/day and sediment yield with rice straw mat was 25.5 ton/day, and the reduction rate was 38.7 %. Also, average daily sediment yield with/without rice straw mat were 97.5 ton/day and 190.7 ton/day during the rainy season (Jun. 2008 - Aug. 2009), with the reduction rate 46.3 %.