• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.24 no.68
• /
• pp.67-84
• /
• 2001

Hotel industry publications demonstrate a keen interest in the revenue enhancing potential of yield management, but there has been little research on the extent to which this pricing technique is actually utilized by hotel general managers. This research tests the proposition that there are eight basic elements of yield management in hotels. The degree to which yield management is practiced is indicated by the extent that these eight elements are in place. It was found that there is a positive relationship between a managers perception of his or her own yield management utilization and the extent to which the eight elements are used. It was also found, however, that while 77% of hotels claim to be utilizing yield management techniques extensively, very few are using all of the basic elements in their efforts to maximize revenue.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.2 s.21
• /
• pp.77-87
• /
• 2005

The thermomechanical characteristics were evaluated for 17-4PH stainless steel widely used in supersonic airframe subjected to both aerodynamic loading and heating. The thermomechanical tests were conducted under both elevated temperature and rapid heating condition from $1^{\circ}C/sec\;to\;28^{\circ}C/sec$. The thermomechanical behaviors under rapid heating were compared with those of elevated temperature after 1/2 hour exposure in terms of yield stress to investigate the influence of heating rates. A heating rate-yield temperature parameter was suggested for rapid heating based on time-temperature parameters, and master yield stress curve was obtained by using these parameters. The experimental results and methodology from this study can be used as basic engineering data when designing supersonic vehicle structures subjected to aerodynamic loading and severe heating environment.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.25 no.2
• /
• pp.76-81
• /
• 1980

Root yield, number of missing and diseased plant in each line were investigated in various ginseng farms. Root yield per unit area was negatively correlated to missing percentage. Missing percentage showed significant positive correlation with diseased rate. Among lines yield was significantly different in most fields while missing rate was not, indicating that yield of each line is affected by present shading method but disease occurrence is not. Thus there are two ways of yield increase, shading improvement and disease control.

• Plant Resources
• /
• v.7 no.1
• /
• pp.54-59
• /
• 2004

This study was conducted to investigate the relationships between yearly variations of weather elements and productivity in rice. In addition, coefficients of correlation among yield and yield components were used to find out the relationships between weather elements and productivity. Coefficients of variance (C.V.) of air temperature mean was considerable with 25％, but the variation by duration of sunshine was small in May. Culm length and number of spikes were great with c.v. of 21.5, 16.4％, respectively. Coefficients of correlation between temperatures of cultivation in May and yield were positive correlations. Coefficients of correlation between precipitation and sunshine of cultivation period from Oct. to May and yield were negative correlations. Coefficients of correlation amount the culm length, number of spikes, 1,000 grains wt. of seed, and yield were positively significant at the level of 1 ％, respectively.

• Nuclear Engineering and Technology
• /
• v.53 no.9
• /
• pp.3012-3017
• /
• 2021

The spatial distribution and the energy spectrum of the neutron yield were investigated with the neutron activation analysis and MCNP simulation was carried out to verify the analysis results and to extend the results to a 3D mapping of the neutron yield distribution in the KSTAR. High purity Ni specimen was selected in the neutron activation analysis. Total neutron yields turned out to be 3.76 × 10¹² n/s - 7.56 × 10¹² n/s at the outer vessel of the KSTAR, two orders of magnitude lower than those at the inner vessel of the KSTAR, which demonstrates the attenuation of neutron yield while passing through the different structural materials of the reactor. Based on the fully expanded 3D simulation results, 2D cross-sectional distributions of the neutron yield on XY and ZX planes of KSTAR were examined. The results reveal that the neutron yield has its maximum concentration near the center of blanket and decreases with increasing proximity to the vacuum vessel wall.

• Advances in Energy Research
• /
• v.8 no.4
• /
• pp.233-241
• /
• 2022

Biodiesel is a non-polluting and non-toxic energy source that can replace conventional diesel. However, the higher production cost and raw material scarcity became challenges that obstruct the commercialization of biodiesel production. In the current investigation, fried cooking oil is used for biodiesel production in a hydrodynamic cavitation reactor, thus enhancing raw material availability and helping better waste oil disposal. However, due to the cavitation effect inside the reactor, the hydrodynamic cavitation reactor can give biodiesel yield above 98%. Thus, the use of orifice plates (having a different number of holes for cavitation) in the reactor shows more than 90% biodiesel yield within 10 mins of a time interval. The effects of rising temperature at different molar ratios are also investigated. The five-hole plate achieves the highest yield for a 4.5:1 molar ratio at 65℃. And the similar result is predicted by the response surface methodology model; however, the optimized yield is obtained at 60℃. The investigation will help understand the effect of hydrodynamic cavitation on biodiesel yield at different molar ratios and elevated temperatures.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1989.02a
• /
• pp.42-43
• /
• 1989

• Journal of the Korea Concrete Institute
• /
• v.24 no.6
• /
• pp.685-693
• /
• 2012

The yield strength of shear reinforcement is restricted in the present design codes. In this study, the possibility of the yield strength increase in shear reinforcement is evaluated according to ACI318-08, EC2-02 and CSA-04 by comparing the experimental and calculated results. Three cases were used to analyze the shear strength of the beam. One had no limitation in the yield strength of shear reinforcement, another had restriction on the yield strength of shear reinforcement, and the other had a restriction on the yield strength of shear reinforcement and the shear reinforcement ratio. The study results showed that the case with unlimited shear reinforcement yield strength predicted the test result better than other two cases. Even though the rebar yield strength higher than the strength required in present code was applied to existing shear design equation, the result was reasonable. Therefore, the design equation seemed to be appropriate even if the high-strength shear reinforcement is used in practice based on the existing shear design method.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.7
• /
• pp.1049-1054
• /
• 2003

A group of Hanwoo (Korean cattle) steers (n=14,386) was sampled from a commercial abattoir located in Seoul over one year period (spring, summer, autumn and winter) and their carcass traits were collected. Carcass traits assessed by an official meat grader comprised degree of marbling, meat color, fat color, texture and maturity for quality grade, and back fat thickness, ribeye area and carcass weight for yield grade. A heavier carcass with a higher marbling score, more red meat color and white fat color received better quality grade (p<0.05). Regression analysis showed that the marbling score was the strongest attribute (partial $R^2=0.88$) for quality grade. Lighter carcasses with a thinner back fat and larger ribeye area received higher yield grade score. The back fat thickness was the most negative determinant of yield grade (Partial $R^2=-0.66$). The slaughter season had a little effect on quality and yield grades. As slaughter weight increased, back fat thickness and ribeye area increased linearly, whereas marbling score reached its asymptotic level at approximately 570 kg. As a consequence, quality grade showed a considerable improvement up to 570 kg, but increases in slaughter weight afterward showed a little benefit on quality grade. There was a clear curvilinear relationship between slaughter weight and yield grade in that the yield grade reached its highest point at approximately 490 kg and decreased afterward. These results suggested that 570kg at the age of 24 months might be the economic slaughter weight for quality grade but 490 kg for yield grade.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.8 no.1
• /
• pp.67-71
• /
• 2004

Ten improved mulberry varieties (Vl, C1730, C2016, C2017, Anantha, RFS-175, Thallaghatapura, Vishala, S1 and S1635) were evaluated through enzyme assay and estimation of soluble protein content followed by regression analysis, grown under irrigated conditions in the alluvial soils of Gangetic plains of West Bengal in India for five successive crops in a year, The nitrate reductase (EC No. 1.6.6.1) activity (NRA, $\mu$mol N $O_2$- $h^{-1}$ $g^{-1}$ fr, wt.), total soluble protein (mg $g^{-1}$ fr, wt.) was estimated which showed to vary significantly in the tested varieties. In addition to these, the other parameters like unit leaf fresh and dry weight (g), moisture ％, unit leaf area ($\textrm{cm}^2$), specific leaf weight (g c $m^{-2}$ ), total soluble sugar (mg $g^{-1}$ fr, wt.), leaf yield/plant (kg), shoot yield/plant (kg) and net photosynthetic rate (NPR, $\mu$㏖ $m^{2}$ $s^{-1}$ ) were also studied which showed to vary significantly in tested varieties. Among them, S1635, haying higher NRA (13.25 $\mu$㏖ N $O_2$- $h^{-l}$ $g^{-1}$ fr, wt.), total soluble protein (39.63mg $g^{-1}$ fr, wt.), NPR(16.66 $\mu$㏖ $m^{-2}$ $s^{-1}$ ), total soluble sugar (48.44 mg $g^{-1}$ fr. wt.), leaf yield/plant (0.689 kg) and shoot yield/plant (1.135 kg) showed its superiority over other tested varieties. Regression and correlation coefficients were analysed, and a strong positive correlation was found between NRA ＆ total soluble protein, NRA ＆ NPR, NRA ＆ total soluble sugar, NRA af unit leaf weight, NRA ＆ specific leaf weight, NRA ＆ leaf yield/plant, NRA ＆ shoot yield/plant, NPR ＆ leaf yield and NPR ＆ specific leaf weight.t.