• Applied Science and Convergence Technology
• /
• v.26 no.5
• /
• pp.118-128
• /
• 2017

The scope of this work is to determine and compare the effect of electron temperature ($T_e$) and number density ($N_e$) on the yield rate and concentration of reactive chemical species ($^{\bullet}OH$, $H_2O_2$ and $O_3$) in an argon, air and oxygen injected negative DC (0-4 kV) capillary discharge with water flow(0.1 L/min). The discharge was created between tungsten pin-to pin electrodes (${\Phi}=0.5mm$) separated by a variable distance (1-2 mm) in a quartz capillary tube (2 mm inner diameter, 4 mm outer diameter), with various gas injection rates (100-800 sccm). Optical emission spectroscopy (OES) of the hydrogen Balmer lines was carried out to investigate the line shapes and intensities as functions of the discharge parameters such as the type of gas, gas injection rate and inter electrode gap distances. The intensity ratio method was used to calculate $T_e$ and Stark broadening of Balmer ${\beta}$ lines was adopted to determine $N_e$. The effects of $T_e$ and $N_e$ on the reactive chemical species formation were evaluated and presented. The enhancement in yield rate of reactive chemical species was revealed at the higher electron temperature, higher gas injection rates, higher discharge power and larger inter-electrode gap. The discharge with oxygen injection was the most effective one for increasing the reactive chemical species concentration. The formation of reactive chemical species was shown more directly related to $T_e$ than $N_e$ in a flowing water gas injected negative DC capillary discharge.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.1
• /
• pp.124-132
• /
• 1997

This paper describes an experimental and numerical study on growing ductile crack-tip behaviors. The hybrid experimental and numerical method by means of a computer image processign technique, was applied to the analysis of both base metal and weld metal CT specimens. In the weld metal specimen, the initial crack-tip was placed in front of fusion line, and the crack orientation was perpendicular to it. Finite element analysis of crack growth behaviors in both base and weld matal specimens made of A533B Class 1 steel were also performed to examine the effects of weldment on near crack-tip fields. a series of experimental studies on crack-tip behaviors have clearly shown the qualitative effects of material properties, especially a hardening exponent. The experimental and numerical results have also shown that weldment does not affect displacement and strain fields near a crack-tip while a stress field is influenced by the difference between yield stresses of both base and weld metals.

• The KSFM Journal of Fluid Machinery
• /
• v.7 no.2 s.23
• /
• pp.7-13
• /
• 2004

In an attempt to solve multiobjective optimization problems, weighted sum method is most widely used for the advantage that a designer can consider the relative significance of each object functions by weight values but it can be highly sensitive to weight vector and occasionally yield a deviated optimum from the relative weighting values designer designated because the multiobjective function has the form of simple sum of the product of the weighting values and the object functions in traditional approach. To search the design solution agree well to the designer's weighting values, we proposed new multiobjective function which was the functional of each normalized objective functions and considered to find the design solution comparing the distance between the characteristic line and the ideal optimum. In this study, proposed multiobjective function was applied to design high efficiency and low noise axial flow fan and the result shows this approach is effective for the case that the quality of the design can be highly affected by the designer's subjectiveness represented as weighting values in multiobjective design optimization process.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.1 s.109
• /
• pp.17-24
• /
• 2005

The increase of using low grade ace, the unsorted mixed grade, as fibrous raw materials for the packaging paper results in the increment of fine screen reject owing to the strong tendency to reduce the slot width. Since the most of screen reject consists of undispersed fiber flake, the suitable treatment of the flake could increase the yield of ace recycling and decrease the amount of solid waste. In this work, the novel method combined the mild mechanical treatment by using Tumbling pulper with the biological treatment was developed and applied to the wet strength flake and the fine screen tail line reject originated from a packaging paper mill. The results showed the new method could provide much better efficiency for the disintegration of undispersed flake and for the recovery of fiber from the rejects. The application of the laboratory scaled-Pack pulper showed the possible separation technique for mill application by fractioning effectively the fiber from the treated solid waste.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.397-403
• /
• 2003

In an attempt to solve multiobjective optimization problems, weighted sum method is most widely used for the advantage that a designer can consider the relative significance of each object functions by weight values but it can be highly sensitive to weight vector and occasionally yield a deviated optimum from the relative weighting values designer designated because the multiobjective function has the form of simple sum of the product of the weighting values and the object functions in traditional approach. To search the design solution well agree to the designer's weighting values, we proposed new multiobjective function which is the functional of each normalized objective functions and considered to find the design solution comparing the distance between the characteristic line and the ideal optimum. In this study, proposed multiobjective function was applied to design high efficiency and low noise axial flow fan and the result shows this approach will be effective for the case that the qualify of the design can be highly affected by the designer's subjectiveness represented as weighting values in multiobjective design optimization process.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.4
• /
• pp.108-112
• /
• 2023

Precision manufacturing technology is rapidly developing due to the extreme miniaturization of semiconductor processes to comply with Moore's Law. Accurate and precise alignment, which is one of the key elements of the semiconductor pre-process and post-process, is very important in the semiconductor process. The center detection of wafer align marks plays a key role in improving yield by reducing defects and research on accurate detection methods for this is necessary. Methods for accurate alignment using traditional image sensors can cause problems due to changes in image brightness and noise. To solve this problem, engineers must go directly into the line and perform maintenance work. This paper emphasizes that the development of AI technology can provide innovative solutions in the semiconductor process as high-resolution image and image processing technology also develops. This study proposes a new wafer center detection method through variable thresholding. And this study introduces a method for detecting the center that is less sensitive to the brightness of LEDs by utilizing a high-performance object detection model such as YOLOv8 without relying on existing algorithms. Through this, we aim to enable precise wafer focus detection using artificial intelligence.

• Korean Journal of Breeding Science
• /
• v.41 no.1
• /
• pp.56-60
• /
• 2009

A new naked oat cultivar Daeyang (Avena sativa L.) was developed by Department of Rice and Winter Cereal Crop, NICS, RDA in 2007. It was derived from a cross between 'FLX446-1-84-Q1'. and 'SO92004-B-3-3-5-7'. The FLX446-1-84-Q1, a naked oat cultivar from USA, is early heading and has good seed quality, while the SO92004-B-3-3-5-7, a covered oat breeding line, has a high yield with large grain. Subsequent generations were handled in a bulk method and pedigree selection program, and the SO97013-B-16-4 was selected based on agronomic performance in 2001. The line showed both high yield and good husking rate of seed in the yield trial tested at Suwon from 2002 to 2003, being designated as Gwiri51. The Gwiri51 was subsequently evaluated for winter hardiness, earliness, and yield in four locations, Gimje, Iksan, Jeongeup, and Jinju, from 2004 to 2007 and was designated as "Daeyang" and released. Its heading date was May 8 and maturing time was June 14 in a paddy field condition. The new cultivar Daeyang had 97 cm of culm length and 25.2 cm of spike length, 644 spikes per $m^2$, 65 grains per spike, 30.3 g of 1,000-grain weight, and 635 g of test weight. Daeyang showed better winter hardiness than that of the check cultivar 'Sunyang', and similar seed quality to the check cultivar in respect to percent content crude protein and $\beta$-glucan. However, it showed higher husking rate than the check cultivar. Grain yield of Daeyang in the regional yield trial for 4 years were averaged 4.18 MT $ha^{-1}$, which was 20% higher than that of the check cultivar Sunyang. Fall sowing cropping is recommended only in a south area where daily minimum mean temperatures are averaged higher than $-4^{\circ}C$ in January, and should be excluded in mountain area where frost damage is presumable.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.568-573
• /
• 2009

A new soybean variety, "Singang", was released by NICS, RDA in 2008. It is resistant to soybean mosic virus (SMV), which is one of the most serious diseases in soybean production. "Singang" had been developed for seven years by molecular marker-assisted selection (MAS) breeding method using recurrent parent, "Sowon", and donor parent, "L29" which has the SMV-resistance gene, Rsv3. Selected promising breeding line, Suwon 242, was evaluated in yield trials for 2 years from 2005 to 2006 at NICS. Regional yield trials were performed for 3 years from 2006 to 2008 in five locations including Jeju. Agronomic characteristics of "Singang" is a determinate growth habit, purple flower color, grey pubescence, yellow testa, light brown hilum and lanceolate leaflet shape. "Singang" showed the similar performance to "Sowon" cultivar. This variety showed 3 days shorter in days to maturity than the check variety (Pungsannamul). The average yield under regional yield trials in five location was 2.78t/ha. It is adaptable to the whole country except for Gangwon province.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.288-288
• /
• 2022

Rice is an important staple in the world. And drought is one of the important constraints that negatively affect yield loss and grain quality of rice. CRISPR/Cas9 is a new breeding strategy that can improve the characteristics of rice quickly and accurately. CRISPR/Cas9 is a novel approach that can reliably harvest rice yields in response to a rapidly changing climate. In addition, there is no externally inserted DNA left in genome-editing rice, and it is receiving attention as being able to take responsibility for future food because its characteristics are continuously improved. In the future, high levels of drought resistant in water-constrained environments will be required, which will reduce yield loss. OsSAP was genome-editing with CRISPR/Cas9 in rice. A different line number was assigned to each panicle, and the generation advanced by applying the ear-to-row method. Genome-editing rice has improved drought resistance in drought conditions. Also, in genome-editing rice, the target sequence was homozygous in the 0 generation, and the coefficient of variation of heading date, number of tiller, and 1,000-grain weight was very small in 2 generation. In the era of rapidly changing climate change, CRISPR/Cas9 presents a new breeding strategy that can rapidly and accurately improve agronomic traits of major food crops as well as rice. CRISPR/Cas9 is applied together with traditional breeding to develop into a new breeding strategy, it is suggested that food can be obtained stably in response to climate change.

• Korean Journal of Poultry Science
• /
• v.17 no.3
• /
• pp.141-156
• /
• 1990

The experiments were conducted to investigate the possibility of improving the effectiveness of the existing method to estimate the edible meat weight in the live broiler chicken. A total of 360 birds, five male and female chicks from each line were sacrificed at Trial 1 (body weight 900-1, 000g), Trial 2 (body weight 1.200-1, 400g), Trial 3(body weight 1, 600-1, 700), and Trial 4(body weight 2, 000g) in order to measure the body weight, edible meat weight of breast, thigh and drumsticks, and various components of body weight. Each line was reared at the Poultry Breeding Farm, Seoul National University from the second of july, 1987 to the thirteenth of September, 1987. The results obtained from this study were summarized as follows ： 1. The average body weights of each line( H. T, M, A) were $2150.5\pm$34.9, $2133.0\pm$26.2, $1960.0\pm$23.1, and $2319.3\pm$27.9, respectively. at 7 weeks of age. The feed to body weight eain ratio for each line chicks was 2.55, 2.13, 2.08, and 2.03, respectively, for 0 to 7 weeks of age. The viability of each line was 99.7. 99.7, 100.0, and 100.0%, respectively, for 0 to 7 weeks of age.01 was noticed that A Line chicks grow significantly heavier than did T, H, M line chic ks from 0 to 7 weeks of age. The regression coefficients of growth curves from each line chicks were bA＝1.015, bH＝0.265, bM＝0.950 and bT＝0.242, respectively. 2. Among the body weight components, the feather. abdominal fat, breast, and thigh and drumsticks increased in their weight percentage as the birds grew older, while neck. head, giblets and inedible viscera decreased. No difference wat apparent in shank, wings and hack. 3. The weight percentages of breast in edible part for each line thicks were 19.2, 19.0, 19.9 and 19.0% at Trial 4, respectively. The weight percentages of thigh and drumsticks in edible part for each line chicks were 23.1, 23.3, 22.8, and 23.0% at Trial 4. respective1y. 4. The values for the percentage meat yield from breast were 77.2. 78.9 73.5 and 74.8% at Trial 4 in H, T, M and A Line chicks. respectively. For thigh and drumstick, the values of 80.3, 78.4. 79.7 and 80.2% were obtained. These data indicate that the percentage meat yield increase as the birds grow older. 5. The correlation coefficients between body weight and blood. head, shanks. breast. thigh-drumstick were high. The degree if correlation between abdominal fat(%) and percentage of edible meat were extremely low at all times, but those between abdominal fat (%) and inedible viscera were significantly high.