• Structural Engineering and Mechanics
• /
• v.84 no.1
• /
• pp.129-141
• /
• 2022

It has previously been proposed that the yield-line method of analysis for reinforced concrete slabs could be automated via the use of rigid finite elements, assuming all deformations occur along element edges. However, the solutions obtained using this approach can be observed to be highly sensitive to mesh topology. To address this, a revised formulation that incorporates modified yield criteria to account for the presence of non-zero shear forces at interfaces between elements is proposed. The resulting formulation remains simple, with linear programming (LP) still used to obtain solutions for problems involving Johansen's square yield criteria. The results obtained are shown to agree well with literature solutions for various slab problems involving uniform loading and a range of geometries and boundary conditions.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10b
• /
• pp.809-814
• /
• 1998

Recently many cases that using strengthening method with a steel plate or carbon-fiber sheet in a construction field are increasing. In this reason, it is demanded that developing a plan of preventing delamination of strengthening material. So in this research, for the case of strengthening method of steel plate, it is made use of notch and anchor bolt and for the case of carbon fiber sheet, it is made use of notch, anchor bolt, line anchor and shear strengthening. After all the cases were applied, we made 15 specimen beams. The beams was measured and analyzed about the behavior property of strengthened beams, the ability strengthening method, the relation between load and the shape of failure, the crack load, the yield load, the shape of crack pattern, the increasing rate from yield load and maximum load and the strain of rebar. All the strengthening methods results in almost same value until the yield load, and it wasn't quite different from the theoretical value. But for the case of increasing rate from the yield load and maximum load, comparing with the existing method, the new strengthening methods are proved to be profitable about the safety.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.2
• /
• pp.51-58
• /
• 1988

When a R.C. slab is designed by the yield line theory, there is a possibility of local failure caused by an extreme moment distribution on the yield lines. To reduce the local failures the use of the formula in which the plastic resistence moment in the middle strips is different from that in the column strips was suggested. The formula also has a few other parameters for which the values have to be determined to design the R.C. slab. An attempt was made to determine the ideal values of all these parameters. This will make it easy and realistic to design the R.C. slab by the yield line method.

• The Korean Journal of Food And Nutrition
• /
• v.1 no.2
• /
• pp.31-36
• /
• 1988

An adaptive on-line optimization method has been applied to test the ability to maximize the cellular productivity of a continuous methylotroph culture system which was simulated by a variable yield Monod-type model. Optimum dilution rate and productivity were successively obtained and maintained at all times by the algorithm that utilizes steepest descent technique as optimization method and recursive least-square method with forgetting factor as dynamic model identification.

• Computers and Concrete
• /
• v.3 no.6
• /
• pp.439-454
• /
• 2006

This paper develops an artificial neural network (ANN) model for uniformly loaded restrained reinforced concrete (RC) slabs incorporating membrane action. The development of membrane action in RC slabs restrained against lateral displacements at the edges in buildings and bridge structures significantly increases their load carrying capacity. The benefits of compressive membrane action are usually not taken into account in currently available design methods based on yield-line theory. By extending the existing knowledge of compressive membrane action, it is possible to design slabs in building and bridge decks economically with less than normal reinforcement. The processes involved in the development of ANN model such as the creation of a database of test results from previous research studies, the selection of architecture of the network from extensive trial and error procedure, and the training and performance validation of the model are presented. The ANN model was found to predict accurately the ultimate strength of fully restrained RC slabs. The model also was able to incorporate strength enhancement of RC slabs due to membrane action as confirmed from a comparative study of experimental and yield line-based predictions. Practical applications of the developed ANN model in the design process of RC slabs are also highlighted.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.251.1-251.1
• /
• 2013

Combination of oxidative vacuum annealing and oxygen plasma treatment can serve as a simple and efficient method of line-width modification of imprinted nanopatterns. Since the vacuum annealing and oxygen plasma could lead mass loss of polymeric materials, either one of the process can yield a narrowed patterns. However, the vacuum annealing process usually demands quite high temperatures (${\geq}300^{\circ}C$) and extended annealing time to get appreciable line-width reduction. Although the plasma treatment may be considered as an effective low temperature rapid process for the line-width reduction, it is also suffering for the lowered controllability on application to very fine patterns. We have found that the vacuum annealing temperature can be lowered by introducing the oxygen in the vacuum process and that the combination of oxygen plasma treatment with the vacuum annealing could yield the best result in the line-with reduction of the imprinted polymeric nanopatterns. Well-defined line width reduction by more than 50% was successfully demonstrated at relatively low temperatures. Furthermore, it was verified that this process was applicable to the nanopatterns of different shapes and materials.

• Journal of Applied Biological Chemistry
• /
• v.57 no.4
• /
• pp.301-305
• /
• 2014

The Antioxidant activity screening identification of five kind compounds in Artemisiae annuae herba with the on-line screening high performance liquid chromatography (HPLC) $ABTS^+$ assay. The various experimental variables such as the extraction time (h) and extraction solvent composition (%) of dipping method were investigated efficiently extraction at the room temperature $25^{\circ}C$. The results, the highest yield of total extract amount (0.458 g, 15.250%) was obtained by dipping method with 100% water and extraction time to 3 h. And the on-line screening HPLC-$ABTS^+$ assay method was rapid and efficient to search for bioactivity from natural products.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.4
• /
• pp.388-393
• /
• 2008

Earth observation satellite imagery having medium-resolution can provide the useful information very rapidly and cheaply. The objective of this study was to assess the feasibility for monitoring rice growth and yield using medium resolution satellite imagery at Seosan AB reclaimed area, Chung-nam province. Using the LANDSAT imagery at booting stage ($29^{th}$ July 2004), $NDVI_R$ had the most significant linear relationships with rice yield of Seosan AB reclaimed area with the correlation coefficient (r) as 0.68. Therefore, this relationship was established as rice yield equation as function of $NDVI_R$, where excluding the 10 small area having low number of pixel, the determination coefficient ($R^2$) of the linear regression between NDVIred and milled rice yield was improved to 0.66. In addition, raster masking method, which was easier and faster even if a little unaccurate than preexisting method, was established for extracting information paddy field zone. Adaptability of rice yield equation function of $NDVI_R$ on year and region was investigated using rice yield and $NDVI_R$ values, which were extracted with raster masking method, from 7 counties or cities, Kyeong-ki province in 2005. Relationship between observed and calculated rice yield showed 1:1 line indicating that the adaptability was admitted.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.9
• /
• pp.14-24
• /
• 2009

Memory cell array and peripheral circuits are designed for system on panel style frame buffer. Moreover, a parallel test methodology to test multiple blocks of memory cells is proposed to overcome low yield of system on panel processing technologies. It is capable of faster fault detection compared to conventional memory tests and also applicable to the tests of various embedded memories and conventional SRAMs. The various patterns of conventional test vectors can be used to enhance fault coverage. The proposed testing method is also applicable to hierarchical bit line and divided word line, one of design trends of recent memory architectures.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.727-732
• /
• 1999

In this research, we made an experiment on the 10 specimen beams that we made. The specimen beams consist of 4 steel plate strengthening beams and 5 carbon fiber sheet strengthening beams. We applied the methods of notch, rounding off a edge, anchor bolt and side shear strengening to the steel plate and for the case of carbon fiber sheet, we applied the methods of anchor bolt, line anchor and shear strengthening. After all the cases were applied, the beams was measured and analyzed about the behavior property of strengthened beams, th ability of strengthening method, the relation between load and the shape of failure, the crack load, the yield load, the shape of crack pattern, the increasing rate from yield load and maximum load and the strain of rebar. All the strengthening methods resulted in almost same value until the yield load, and it wasn't quite different from the theoretical value. In comparison with existing method, the SER, SEAS for the steel plate and the CEA, CESS, CCESS for carbon fiber sheet showed the increasement of ductility with big displacement.