• 한국수자원학회논문집
• /
• 제38권11호
• /
• pp.907-916
• /
• 2005

도시유역의 유출분석을 위하여 국내에서 많이 사용하고 있는 모형들로는 ILLVDAS, SWMM이 대표적이라고 할 수 있다. 그러나 국내의 대부분의 도시하천의 경우 합류식의 배수계통을 가지고 있어, 홍수시에 하수관거용량을 초과하는 우수량은 하천을 통해 배수가 되고 있다. 이러한 배수계통을 갖는 하천에 대하여 대상유역의 배수관망 자료 부족과 Modeling의 어려움으로 인해 도시유출모형이 아닌 HEC-HMS 모형과 같은 유역추적법을 통해 유출분석이 이루어지고 있다. 또한 기존 논문에서 제시한 도시유출모형에 하도추적을 결합한 강우-유출 모의는 정확성 결여 및 번거로운 단점이 있다. 따라서 본 논문에서는 보다 안정적인 해석 모형인 MIKE SWMM 모형을 사용하여 과거 침수자료와 DEM 자료 및 수치 배수관망 자료를 통한 유역 및 배수관망 자료를 구축하고 유역에 대해서는 Runoff Block을 사용하고, 하수관거와 본류에 대해서는 Dynamic 방정식을 이용한 Extran Block을 적용하여 유출분석을 실시하고 그 결과를 기존의 방법들과 비교하여 각각의 장단점 및 적용성을 밝히고 개선방향등을 제시하고자 하였다.

• 한국작물학회지
• /
• 제64권4호
• /
• pp.432-440
• /
• 2019

Global climate change exerts adverse effects on maize production. Among abiotic stresses, drought stress during the tasseling stage (VT) can increase anthesis-silking intervals (ASI) and decrease yield. We performed an evaluation of ASI and yield using a drought-sensitive line (Ki3) and a drought-tolerant line (Ki11) to analyze the correlation with ASI and yield. Moreover, the de novo data of Ki11 were analyzed to find putative novel transcripts related todrought stress in tropical maize. A total of 182 transcripts, with a log2 ratio >1.5, were found by comparing drought conditions to a control. The top 40 transcripts of high expression levels in the de novo analysis were selected and analyzed with PCR. Of the 40 transcripts, six novel transcripts were detected by quantitative real-time PCR (qRT-PCR) using seedling and VT stage samples. Five transcripts (transcripts_1, 12, 34, 35, and 40) were up-regulated in the Ki11 shoot at seedling stage, and transcripts_1, 12, and 40 were up-regulated at the re-watering stage after 12 h of drought stress. The transcripts_32 and 34 were up-regulated at the VT stage. Hence, transcript_34 possibly plays a significant role in drought tolerance during the seedling and VT stages. The transcript_32 was identified as chloramphenicol acetyltransferase (CAT) by Pfam domain analysis. The function of the other transcripts remained unknown. Further characterization of these novel transcripts in genetic regulation will be of great value for the improvement of maize production.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.494-497
• /
• 2004

This paper presents the analysis results predicted by the upper bound approach in the limit analysis of concrete incorporating the original plastic and crack sliding solutions for short high-strength concrete beams that varied the compressive strength of concrete, and the shear span-to-depth and vertical shear reinforcement ratios. The significance of the distance away from the support to define the location where the yield line starts and the properties of cracked concrete, particularly related to high-strength concrete, is identified.

• KSBB Journal
• /
• 제23권4호
• /
• pp.297-302
• /
• 2008

오죽으로부터 HPLC On-line $ABTS^{+}$ screening기법을 사용하여 Flavone C-glycosides의 특성중의 하나인 항산화활성을 빠르게 분석하였으며, 오죽으로부터 homoorientin와 orientin의 추출을 다양한 초음파 주파수와 시간의 추출방법을 적용하였다. 전처리한 추출액에 포함된 오죽의 Flavone C-glycosides을 분석하고 최적의 추출조건을 실험적으로 모색하였다. 실험결과에 의하면 전체 수율에서는 Frequency 72 KHz, 60분에서 3.37 mg으로 추출 효율이 높았고, homoorientin와 orientin의 항산화활성은 Frequency 35 KHz, 30분으로 추출한 시료가 73.8%와 14.8%로 가장 우수하였다.

• Bulletin of the Korean Chemical Society
• /
• 제26권7호
• /
• pp.1057-1064
• /
• 2005

Photoluminescence (PL) spectra of Eu(III) and Tb(III) complexes with mixed oxydiacetate (ODA) and 1,10-phenanthroline (phen) ligands and with homoleptic ODA reveal characteristic line-splitting at 10 K, depending on the site-symmetry of the lanthanide ion in the complex. The energy-level schemes of the $^7F_J$ states and the emitting levels for Eu(III) and Tb(III) ions have been proposed by simulating the line splitting in the framework of crystal-field Hamiltonian. The sets of refined crystal-field parameters for the experimentally determined sitesymmetry satisfactorily reproduce the experimental energy-level schemes. In addition, the PL quantum yield and the decay time were determined at room temperature. The PL quantum yields of [$Eu(ODA){\cdot}(phen){\cdot}4H_2O]^+$ and [Tb$(ODA){\cdot}(phen){\cdot}4H_2O]^+$ in the crystalline state (Q = 17.7 and Q = 56.6%, respectively) are much greater than those of [Eu($ODA)_3]^{3-}and\;[Tb(ODA)_3]^{3-}$(Q = 1.1 and Q = 1.3, respectively), due to the energy transfer from phen to the lanthanide ion. In the aqueous state, the relaxation of the phen moiety due to the solvent results in the reduction of the quantum yield and the shortening of the lifetime.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.82-96
• /
• 2019

A semi-submersible structure has been widely used for offshore drilling and production of oil and gas. The small water plane area makes the structure very sensitive to weight increase in terms of payload and stability. Therefore, it is necessary to lighten the substructure from the early design stage. This study aims at an optimization of hull structure based on a sophisticated yield and buckling strength in accordance with classification rules. An in-house strength assessment system is developed to automate the procedure such as a generation of buckling panels, a collection of required panel information, automatic buckling and yield check and so on. The developed system enables an automatic yield and buckling strength check of all panels composing the hull structure at each iteration of the optimization. Design variables are plate thickness and stiffener section profiles. In order to overcome the difficulty of large number of design variables and the computational burden of FE analysis, various methods are proposed. The steepest descent method is selected as the optimization algorithm for an efficient search. For a reduction of the number of design variables and a direct application to practical design, the stiffener section variable is determined by selecting one from a pre-defined standard library. Plate thickness is also discretized at 0.5t interval. The number of FE analysis is reduced by using equations to analytically estimating the stress changes in gradient calculation and line search steps. As an endeavor to robust optimization, the number of design variables to be simultaneously optimized is divided by grouping the scantling variables by the plane. A sequential optimization is performed group by group. As a verification example, a central column of a semi-submersible structure is optimized and compared with a conventional optimization of all design variables at once.

• 한국산림과학회지
• /
• 제102권1호
• /
• pp.24-29
• /
• 2013

본 연구는 수확망의 이용 효과 및 투자수익성을 구명하여 밤 생산자의 수확망 이용에 따른 경제적 부담을 덜어주기 위한 정책제언에 필요한 기초자료를 마련하고자 실시되었다. 이를 위하여 수확망이 효율적으로 이용되고 있는 청양, 공주, 부여지역에서 6임가를 대상으로 설문조사를 실시하였으며, 비용편익법 중에서 순현재가치가와 수익비용비를 이용하여 투자수익성을 분석하였다. 분석 결과 청양A, 청양B, 부여A 임가에서 보조금이 없는 경우에도 투자수익성이 있는 것으로 나타났으며, 공주A, 공주B, 부여B 임가는 투자수익성이 없는 것으로 나타났다. 수확망 구입에서 보조금을 80%지원해 줄 경우, 청양A, 청양B, 부여A, 공주B 임가에서 투자수익성이 있는 것으로 나타났으나, 공주A, 부여B 임가에서는 여전히 투자수익성이 없는 것으로 나타났다. 임가마다 결과가 다소 상이한 것은 밤나무 식재방식이나 재배지 경사, 인력 활용도 및 숙련도 등의 차이가 원인인 것으로 사료된다.

• Agribusiness and Information Management
• /
• 제10권1호
• /
• pp.1-15
• /
• 2018

Many paddy cultivating farmers in the country are forced to use their limited resources to produce adequate food for their family, leading to the degradation and reduction in potential of these resources. The yield levels of paddy at the farmers' level and in the Front Line Demonstrations (FLDs) conducted in the farmers' fields is not at par with potential yield of the paddy variety. The gap between potential yield of crop variety and yield realized in FLDs refers to Research gap and the yield gap between FLDs and due to farmers' practice refers to Extension gap. The earlier studies conducted in India in general and in Andhra Pradesh in particular highlighted the existence of both research and extension gaps with reference to paddy. It is essential that, the narrowing of both research and extension gaps is not static, but dynamic considering the influence of technological interventions in boosting paddy yields at FLDs level and at farmers' level and also with the improvement of the yield potential of paddy varieties. This calls for integrated and holistic approaches to address these two gaps and with this background, the researcher aimed at this in depth study. The findings revealed that, research gaps are high with reference to weed management and pest management and extension gaps are high with reference to farm mechanization followed by fertilizer management. Reliable source of seed, capital use and frequency of meetings with Scientists or Agricultural Officers significantly influence the extension gaps in paddy. Farmers also prioritized socio-economic and technical constraints and the analysis infers that, it is high time now for the farmers to adopt the planned technological interventions on scientific scale to minimize the extension gaps to the extent possible. As the enabling environment in the State of Andhra Pradesh is highly encouraging for the farmers with relevant policy instruments in the form of subsidized inputs, free power, credit at concessional rates of interest, constructing irrigation projects etc., the adoption of the proposed technological interventions significantly contribute to minimizing both research and extension gaps in paddy cultivation in Kurnool district of Andhra Pradesh.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.593-597
• /
• 2005

FIB equipment can perform sputtering and chemical vapor deposition simultaneously. It is very advantageously used to fabricate a micro structure part having 3D shape because the minimum beam size of ${\phi}$ 10nm and smaller is available. Currently FIB is not being applied in the fabrication of this micro part because of some problems to redeposition and charging effect of the substrate causing reduction of accuracy with regards to shape and productivity. Furthermore, the prediction of the material removal rate information should be required but it has been insufficient for micro part fabrication. The paper have the targets that are FIB-CVD characteristic analysis and minimum line pattern resolution achievement fur 3D micro fabrication. We make conclusions with the analysis of the results of the experiment according to beam current, pattern size and scanning parameters. CVD of 8 pico ampere shows superior CVD yield but CVD of 1318 pico ampere shows the pattern sputtered. And dwell time is dominant parameter relating to CVD yield.

• 터널과지하공간
• /
• 제30권4호
• /
• pp.404-416
• /
• 2020

2차원 응력조건에서 V형 암석노치의 파괴하중을 계산하는 해석적 절차를 slip-line 소성해석법 기반으로 개발하였다. 노치 주변의 암석이 소성상태에 있을 때 slip-line 중 하나인 α선이 암석 노치 면과 노치 외부 수평면을 연결한다는 사실과 α선을 따라서 변하지 않는 불변량이 존재한다는 이론적 사실이 해석적 절차 개발과정에서 핵심 아이디어로 활용되었다. 암석 노치 외부 수평면의 응력 경계조건을 알고 있으므로 불변량 방정식을 풀면 암석 노치 면에 작용하는 수직응력과 전단응력을 계산하는 것이 가능해진다. 노치 면에 작용하는 응력성분 값을 이용하여 쐐기에 의해 노치에 가해지는 파괴하중을 계산하였다. 개발된 해석적 절차를 적용하여 암석 노치파괴 해석을 수행하였다. 암석 노치의 파괴하중은 노치의 각도 및 노치 면의 마찰이 증가함에 따라 지수함수적 비선형성을 가지고 증가하는 특성이 있음을 해석결과는 보여주었다. 이 연구에서 개발한 해석적 절차는 쐐기형 노치 형성을 통한 암석균열 개시조건 연구, 암반 기초 지지력 계산, 암반사면 및 원형터널의 안전성 해석 등에 응용될 수 있을 것으로 기대된다.