• 대한기계학회논문집A
• /
• 제28권5호
• /
• pp.578-585
• /
• 2004

Hardness test is performed for determination of the other properties, such as strength, wear resistance and deformation resistance, as well as hardness itself. And it is performed for prediction of residual lifetime by analysis of hardness reduction or hardness ratio. However, hardness test has limitation that observation of residual indent is needed for determination of hardness value, and that is the reason for not to be widely used in industrial field. Therefore, in this study, we performed researches to obtain Brinell hardness value from quantitative numerical formula by analysing relationship between indentation depths from indentation load-depth curve and mechanical properties such as work hardening exponent, yield strength and elastic modulus.

• 한국농림기상학회지
• /
• 제21권2호
• /
• pp.75-84
• /
• 2019

이 연구의 목적은 random forest 를 활용하여 기상요소만을 이용하여 우리나라 전체의 벼 평균수량을 예측하는데 있다. Random forest 는 예측에 사용되는 각 predictor variable 을 분리할 수 있는데 이를 통해 분리된 시계열 상의 추세가 비정상적인 증가형태를 보였다. 이는 결국 예측능력의 저하로 이어지기 때문에 이를 제거할 필요가 있고 본 연구에서는 이동 평균을 이용하여 제거한 후 예측을 하였다. 1991 년부터 2005 년까지의 기상자료와 수량자료를 학습에 사용하였고 2006 년부터 2015 년까지의 자료들을 검증용으로 사용하였다. 학습자료에 대해서는 상당히 정확한 예측 능력을 보여주었으나 검증 자료에서는 그렇지 못하였다. 그 이유를 분석하기 위해 학습 자료와 검증자료에 대해서 각각 변수 중요도를 산출하여 비교한 결과 두 자료 간에 월별 기상 자료에 대한 중요도가 변동되었음을 발견하였다. 이러하 차이가 발생한 이유는 학습자료와 검증 자료에서의 전국적으로 표준이앙기가 이동하여 벼의 생육기간 자체가 변하였기 때문이다. 따라서, 정확한 예측을 위해서는 지역별 파종기 또는 이앙기에 대한 자료가 필요하며 단순히 기상 자료만을 활용한 예측은 어려운 것으로 생긱된다.

• 한국작물학회지
• /
• 제51권4호
• /
• pp.269-273
• /
• 2006

Multiple linear regression analysis was conducted to interpretate the relationship between sesame grain yield and its components under early sowing cropping condition. The t test showed that stem length, number of capsules per plant, 1000 seeds weight and seed weight per plant gave significant contribution to sesame grain yield, therefore those variables were assumed to mostly influenced components to grain yield of sesame. In the stepwise regression analysis, the predicted equation for sesame grain yield per square meter (Y) was Y = -7.900 + 0.150X1 + 0.461X5 + 15.553X6 + 8.543X7. Meanwhile, F value showed that stem length, number of capsules per plant and seed weight per plant gave significant contribution to sesame grain yield, while 1000 seeds weight did not significantly show. Based on the results, it is reasonable to assume that high yield. potential of sesame under early sowing cropping condition would be obtained by selecting breeding lines with long stem length, number of capsules per plant, and seed weight per plant, which was different result at the late sowing cropping condition in which days to flowering and maturity were assumed to be more affected factors to the sesame grain yield.

• 한국지반공학회지:지반
• /
• 제5권1호
• /
• pp.7-18
• /
• 1989

암반에 지지된 선단지지맡뚝에 대한 연직재하시험시, 극한하중에 이르기까지 재하를 실시하는 것은 일반적으로 불가능하다. 이러한 경우 말뚝재하시험결과로부터 설계하중을 결정하기 위하여 봉복 윤중의 개념이 도입되어 오고 있다. 그러나, 이 강복초중을 결정하기가 용이하지 않은 경우가 많다. 본 논문에서는 우리나라 서해안과 남해안 지대 6개 현장에서 실시된 말뚝재하시험결과를 검토분 석하여 항복하중을 쉽게 결정할 수 있는 새로운 방법을 제안하였다. 이 방법에서 강복하대은 말뚝의 침하량을 대수눈금으로, 하중을 정규눈금으로 한 반대수응지상에 정리된 하중과 침하량 체선(P- log영상의 변곡점으로 정의되었다. 이 방법에 의한 강복연동보다 약간 많은 하중까지 재하시험을실 기하므로써, 말뚝재하시험의 비용과 시간을 절약할 수 있을 뿐만 아니라 안전한 작업조건도 마련할 수 있다. 이 강복하중은 하중과 침하량 거동의 탄성한계를 규정짓는 하중이 됨을 알 수 있었다. 25.4 mm침하시의 하중으로 결정되는 식한하동은 이 강복륜중의 1.i배에 해당하였으며 장기 및 단기 허 용하중은 각각 이 항복하중의 50%와 75%에 해당하였다. 또한 정역학적 지지력공식을 사용하여 허 용지지력을 구할 경우 안전율은 2.0~4.0으로 밝혀졌다.

• 열처리공학회지
• /
• 제30권3호
• /
• pp.106-112
• /
• 2017

In this study dual-phase steels with different ferrite grain size and martensite fraction were fabricated by varying micro-alloying elements and intercritical anneling temperatures, and then the tensile properties were investigated in terms of yield and tensile strengths, elongation, and yield ratio. The addition of micro-alloying elements reduced ferrite grain size, and the increased intercritial transformation tempeature increased the martensite fracton. The tensile test results showed that yield and tensile strengths of all the steel specimens increased with increasing the martensite fraction. However, the elongation and yield ratio were differently changed according to variations in the morphology and carbon content of martensite, ferrite grain size, and precipitates resulting from the addition of micro-alloying elements and intercritical annealing.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권9호
• /
• pp.1235-1238
• /
• 2000

Thirty-six Holstein dairy cows were used to evaluate the effect of a rumen protected methionine supplement (RPMet). The cows were divided into two groups of 18 each (control/experimental). The experimental group was given 15 g/d of RPMet (Mepron $^{(R)}$M85, Degussa) from the 4th to the 26th week postpartum. All cows were fed a similar amount of forage including alfalfa silage, corn silage and timothy silage. Concentrate mixture was offered in proportion to the milk yield of each cow. Sufficiency of major metabolizable AAs was checked. Milk yield and milk composition was monitored for each individual cow. A metabolic profile test (MPT) was carried out at the 7th, 11th and 21st week postpartum. Without supplement, both methionine and leucine fell short of the daily requirement. Supplementation with 15 g/d RPMet was calculated to be within a sufficient margin of safety. Milk yield tended to remain higher in the supplemented group than in the controls during supplementation with RPMet. The differences in weekly milk production at the 17th, 18th, 19th and 22nd weeks postpartum were significantly high in the RPMet group (p<0.05). The average 305-d milk yield and the percentages of milk fat, milk protein and solids-not-fat were not affected by the treatment. No differences were observed in either the somatic cell count in the milk or the reproductive status. Judging from MPT, all the cows were in good health during lactation.

• 대한기계학회논문집
• /
• 제17권1호
• /
• pp.78-89
• /
• 1993

본 연구에서는 Gillis 이론의 이와같은 단점을 보완하기 위하여 Gillis에 의 하여 제시된 수정운동량 보존법칙과 Hawkyard에 의하여 제시된 에너지보존법칙을 일반 화한 수정에너지보존법칙을 동시에 고려하여 재료의 동적항복응력을 결정할 수 있으며, 봉충격시험편의 충돌완료 후의 변형형상간의 관계를 고려할 수 있는 이론을 제시하였 다. 또한 기존의 실험결과로부터 제시된 이론의 타당성을 분석하였으며, 시험편의 변형형상의 측정오차가 동적항복응력의 결정에 미치는 영향을 분석하였다. 한편 압 축공기를 이용한 시험편 가속정치에 의하여 봉충격시험을 수행하여 괘삭황동(free -cutting brass)의 고변형률속도하에서의 변형특성과 동적항복응력을 결정하였다.

• 대한기계학회논문집A
• /
• 제28권5호
• /
• pp.554-562
• /
• 2004

An empirical relationship between parameters from SP curves and tensile properties has been systematically investigated by experimental tests and FEM simulations. A series of SP and tensile tests were performed. SP tests were also simulated by FE analysis with various tensile properties. It was found that the yield loads(Py) and the maximum loads( $P_{MAX}$) in SP curves were linearly related with the yield strength($\sigma$$_{o}$) and the tensile strength($\sigma$$_{UTS}$), respectively. The yield loads defined from the intersection point of two lines tangent to the elastic bending region and plastic bending region showed better relation to the yield strength than those from offset line. The maximum loads in SP curves showing plastic instability region was linearly related with the tensile strengths. The slope of SP curves in simulation results had a close correlation with the hardening coefficient and hardening strength as well.l.l.l.

• Nuclear Engineering and Technology
• /
• 제44권5호
• /
• pp.543-550
• /
• 2012

The decrease in the fracture toughness of ferritic steels in a reactor pressure vessel is an important factor in determining the lifetime of a nuclear power plant. A surveillance program has been in place in Korea since 1979 to assess the structural integrity of RPV steels. In this work, the surveillance data were collected and analyzed statistically in order to derive the empirical relationship between the embrittlement and strengthening of irradiated reactor pressure vessel steels. There was a linear relationship between the yield strength change and the transition temperature shift change at 41 J due to irradiation. The proportional coefficient was about $0.5^{\circ}C$/MPa in the base metals (plate/forgings). The upper shelf energy decrease ratio was non-linearly proportional to the yield strength change, and most of the data lay along the trend curve of the US results. The transition regime temperature interval, ${\Delta}T_T$, was less than the US data. The overall change from irradiation was very similar to the US results. It is expected that the results of this study will be applied to basic research on the multiscale modeling of the irradiation embrittlement of RPV materials in Korea.

• Journal of Ginseng Research
• /
• 제4권1호
• /
• pp.1-7
• /
• 1980

In order to establish effective extracting method of ginseng extracts from fresh ginseng, the yield, chemical composition, physical properties and organoleptic quality of the extracts, which are extracted with various concentrations of ethanol, were investigated. The results are as follows : 1. The yield of the extracts was increased with decreasing the concentration of ethanol as solvent. As in case of water as a solvents, the highest yield was achieved when 23.64% of water was used. The yield were 12.3% and 9.05%, when 70% and 90% of ethanol were used, respectively lively. 2. Crude protein content is the highest level and nitrogen·free extracts content is the lowest at the concentration of 50% ethanol. Lipid was increased linerly while ash was decreased as increment of ethanol concentration. 3. Viscosity and residue of the extracts also decreased in accordance with the increament of ethanol concentration and the transmittance value and pH of extract solutions were almost similar except transmittance value of the water extracts. 4. The extracts extracted with 70% ethanol gave the best result of sensory test. The total sensory test score of each extracts (70%, 90%, 50%, 0% and 30%) were 70, 65, 50, 46 and 41, respectively.