• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.3
• /
• pp.193-202
• /
• 2017

This study was carried out in 2014 and 2015 to investigate the effect of transplanting density on panicle production and to analyze the relationship of panicle production with yield traits in the mid-maturing quality rice cultivar 'Haiami' in the mid-plain area of Korea. Number of tillers per square meter increased by reducing planting distance and increasing seedling number per hill. These effects were maintained until maturity and were reflected in the final number of panicles per square meter, although the effect of planting density decreased as rice growth progressed. However, increased panicle number per square meter following dense planting did not improve head rice yield. Panicle number per square meter was negatively associated with spikelet number per panicle and was not correlated with other yield components or head rice yield. Head rice yield was not correlated with head rice percentage but was closely and positively correlated with milled rice yield. Milled rice yield did not increase with grain filling percentage but increased with spikelet number per square meter. Spikelet number per square meter increased with both spikelet number per panicle and panicle number per square meter, although the former had a greater influence. Therefore, we conclude that head rice yield of the 'Haiami' cultivar grown in the mid-plain area of Korea is not improved with an increased panicle number following high planting density but it could be improved with high milled rice yield by increasing spikelet number per unit area.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.206-206
• /
• 2017

Sorghum is a crop with a various plant height depending on the planting density. If the height exceeds 1.8m, which is the harvestable height of the combine, loss is caused by clogging of the installation, entrance of the threshing section and the threshing section. The purpose of this study is to set the planting distance and number of plants per hill suitable for combine harvesting as the plant length does not exceed 1.8m. The experimental variety was Nampungchal. The experiment design was a split-plot design with three replications. The treatments were as follow: Main-plot were 1 and 2 plants as number of plants per hill and sub-plots were $60{\times}20cm$ (practice), $70{\times}15$, 20, 25, 30 cm as planting distance. The amount of nitrogen, phosphate and potassium fertilization were 100, 70, $80kg\;ha^{-1}$. Data were collected: (1) grain yield: weight of grain in $kg\;ha^{-1}$, (2) 1000 grain weight: average weight of 1000 grain, (3) plant height: distance from soil to top of panicle, (4) ear length: distance from top of stem to top of ear in cm, (5) stem diameter: diameter of second internode, (6) tiller number per hill. Analyses of variance were performed using R version 3.3.1(https://www. r- project. org). The Duncan's multiple range test(DMR) was used to separate treatment means at P < 0.05. As number of plants per hill increased, plant height and yield increased and tiller number decreased. As planting distance increased, plant height and yield decreased and tiller number increased. At 1 plant per hill, the plant height did not exceed 1.8m at all planting distance. At 2 plants per hill, the plant height did not exceed 1.8m from the planting distance of $70{\times}25cm$. At 1 plant per hill, the tiller number increased to 0.23, 0.27, 0.60 and 0.70 as the planting distance increased to $70{\times}15$, 20, 25 and 30 cm, respectively. At 2 plants per hill, the tiller number increased to 0.03, 0.03, 0.14 and 0.40 as the planting distance increased to $70{\times}15$, 20, 25 and 30 cm, respectively. At 1 plant per hill, the yield decreased to 6030, 4280, 3400 and $3230kg\;ha^{-1}$ as the planting distance increased. At 2 plant per hill, the yield decreased to 7850, 5770, 5720 and $4960kg\;ha^{-1}$ as the planting distance increased. We recommend that the optimum number of plants per hill and planting distance is 2 and $70{\times}25cm$ suitable for combine harvesting.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.323-323
• /
• 2017

In many sub-Saharan African countries, boosting rice production is a pressing food security issue. To contribute to the increase in rice production, we have developed lines of NERICA 1 introgressed with the gene for spikelet number, Gn1a, and the gene for primary rachis-branch number, WFP by cross breeding. The performance of rice lines introgressed with the genes for yield related traits can be affected by cultivation environment and management. Thus, in this study, we aimed to evaluate the lines of NERICA 1 introgressed with Gn1a or/and WFP for yield and yield components under different nitrogen fertilization conditions in Kenya. A field trial was conducted at a paddy field in Kenya Agricultural and Livestock Research Organization-Mwea, Kirinyaga County ($0^{\circ}39^{\prime}S$, $0^{\circ}20^{\prime}E$) from August 2016 to January 2017. Eight lines of NERICA 1 introgressed with Gn1a and/or WFP, and their parents, NERICA 1 and ST12, were grown under 0 (NF) and $75(SF)kg\;N\;ha^{-1}$. At maturity, five hills per plot were harvested to determine the yield and yield components. The number of primary and secondary rachis-branches per panicle was measured on the longest panicle in each hill. Under SF, the introgression of WFP to NERICA 1 increased the number of primary and secondary rachis-branches by 27 and 25%, respectively. On the other hand, Gn1a did not increase the number of primary rachis-branches, whereas the number of secondary rachis-branches was increased by 38% on average. The number of primary and secondary rachis-branches of the lines introgressed with both genes increased by 25 and 56%, respectively. Although grain number per panicle increased 33% by Gn1a, 34% by WFP, and 43% by Gn1a+WFP, the yield increase by Gn1a, WFP, and Gn1a+WFP was only 14, 7, and 14%, respectively. The suppression of the yield increase was mainly attributed to the decline in the filled grain ratio. Under NF, WFP increased the number of primary and secondary rachis-branches by 20 and 19%, respectively. The introgression of both genes increased the former and the later by 19 and 35%, respectively. However, Gn1a did not change them under NF. Thus, even under NF, grain yield increased 11% by WFP and 24% by Gn1a+WFP due to the increased grain number although filled grain ratio declined. Our findings suggest that the introgression of Gn1a and WFP could contribute to the rice productivity improvement in sub-Saharan Africa even under low fertility conditions. Improving filled grain ratio of the lines introgressed with these genes by further breeding and fertilization management will be the focus of subsequent work.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.20 no.2
• /
• pp.91-96
• /
• 2000

This research was concluded under dryland condition in Thrace region in 1994-1995 growing season. This experiment was arranged in randomised block design with three replications. Yield and some important yield components (plant height, number of pods per plant, number of seeds per pod and 1000 seed weight) were determined. According to the results, it can be concluded that the best sowing rate and row distance of chickling vetch for the region are $100\;seed/\textrm{m}^2$ and 20 cm, respectively.

• Transactions of Materials Processing
• /
• v.21 no.5
• /
• pp.324-329
• /
• 2012

Mg-(9-x)Sn-xAl-1Zn (x=1, 2, 3 and 4 wt.%) alloys were subjected to indirect extrusion, and the microstructure and mechanical properties of the as-extruded Mg-Sn-Al-Zn (TAZ) alloys were investigated. The TAZ 811 alloy exhibited a finer grain structure than the TAZ 541 alloy due to a larger number of Mg2Sn particles, which pinned the grain boundaries and prevented growth of recrystallized grains. The TAZ alloys showed an unusual yield asymmetry behavior. The tension-compression yield asymmetry increased with decreasing average grain size. The TAZ 811 alloy with a small grain size exhibited a larger yield asymmetry than that of the TAZ 541 alloy having a relatively large grain size, which is mainly attributed to the low Al content and large number of second phase particles in the TAZ 811 alloy.

• Korean Journal of Plant Resources
• /
• v.19 no.6
• /
• pp.697-699
• /
• 2006

To find out the best complex fertilizer for high yielding of rapeseed crop, experiment was conducted on complex fertilizers at the experiment field in upland of rapeseed in Mokpo Experiment Station, Nat'l Institute of Corp Science, RDA, Korea. Experiment was laid out in randomized complete block (RCBD) design. The effects of complex fertilizer (22-22-11) on the number of branches, pod length, percentage of seed set and seed yield were highest but on the plant height, ear length, and number of pods per ear were negligible. On th basis of the results reported above, for getting higher yield of rapeseed crop, among the tested fertilizers complex fertilizer (22-22-11) gave the superior performance and is recommended for application.

• The Plant Pathology Journal
• /
• v.21 no.2
• /
• pp.137-141
• /
• 2005

The effect of cotton leaf mosaic disease on morphology, yield and fibre characteristics was examined for a susceptible cotton candidate variety CRIS-168. Plants inoculated at most susceptible growth stage (six week) under screen house showed severe mosaic symptoms. There was a significant reduction in plant height and yield. Cotton leaf mosaic disease was found to produce severe effects on plant morphology with 24.1% reduction in plant height, 25% in internode length and 37.5% in number of sympodia on main stem. However no changes were observed against number of monopodial branches per plant. Inoculated plants showed 82% decrease in yield/plant, 80% in number of boll set/ plant, 12.1% in boll weight, 12.8% in lint weight, 10.8% in seed weight, and 6.8% in seed index. Cotton leaf mosaic disease also showed effects on fibre characteristics with 0.8% decrease in GOT and 1.6% in fibre length. In contrast, uniformity ratio, fibre fineness and maturity index was increased by 20.5%, 14.4% and 0.9%, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.4
• /
• pp.364-367
• /
• 1999

Swordbean was recently introduced to Korea, and cultural technique for stable production, e.g. optimum seeding date and planting space, has not been established. This experiment was conducted to elucidate the changes of growth characteristics, yield components, and yield as affected by different seeding dates and planting spaces. Days to flowering was shortened by 4∼28 days as seeding was delayed. Stem diameter, number of pods per plant, number of seeds per plant, 100-seed weight, and seed yield tended to increase with delaying seeding up to 5 April and then to decrease with further delaying seeding. These results indicate that optimum seeding date of swordbean in unheated polyvinyl house would be early April. Although, the swordbean exhibited large increases in plant height, number of branches per plant, and stem diameter at the wider spacings, planting space could be decreased to the 60 cm plant-spacing and 30 cm row-spacing with no deleterious effect on yield.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.87-90
• /
• 2006

The experimental study has been done for two kinds of pelletized RDFs to Investigate the carbonization effect to the chlorine concentrations, the heating value and the yield of Produced char in variable conditions of the carbonizing temperature and reaction time. One(RDF-1) is made of 100% wasted plastics and the other(RDF-2) is made of 60% wasted paper with 40% wasted plastics. The screw type carbonizer heated Indirectly by oil burner was used for the experiment and RDF feeding rate was 3kg/hr. The carbonizing temperature was 300, 350 400 and $45^{\circ}C$ and the reaction tine was 5, 10 and 15 minutes respectively. As the increase of carbonizing reaction time and temperature, the chlorine reduction rate was increased and oppositely the yield of char was decreased At the temperature of $400^{\circ}C$ and reaction time of 10 minutes the chlorine reduction rate was 60% and the char yield rate was 80% for the RDF-1 and those of RDF-2 were 80% and 75%, respectively. Additional activation experiment to the char produced from RDF-2 was done in the activation reactor by hot steam supply. As the increase of activation time the iodine number was increased. At the activation time of 20 minutes the iodine number was 552mg/g and the yield of activated carbon was 16%.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.6
• /
• pp.73-80
• /
• 2015

Corn stalk is the lignocellulosic biomass, which remain as leftover after harvesting. To use the corn stalk as raw material for paper industry, soda pulping was applied. In chemical compositional analysis, extractive contents of corn stalk (45.1%) was higher than hardwood. With corn stalk pith, soda pulp yield was 25.3% at 10.6 Kappa number, but 39.5% yield with 14.8 Kappa number for corn stalk rind. Higher extractives content in pith is one of the reason for lower pulp yield than rind. Pith pulp fibers had higher fines content than rind pulp. Pith parenchyma cell was removed as fines during pulping or washing process, which caused the lower yield. To use the corn stalks as a raw material for paper making, de-pith process is essential for higher pulp yield and longer pulp length.